ARTlii Play4 Smart Integrate Projector Instruction Manual

ARTlii Play4 Smart Integrate Projecto

Significant considerations

Correct ways to use the device

• Directing the lens towards human eyes is prohibited in order to avoid eye damage caused by the glare of the lens after the device starts.
• Air inlet/outlet must be kept clear to avoid damage to internal electronic components caused by failure of heat dissipation.
• Tissue, cloth and other cleaning tools are prohibited to contact the lens for cleaning in order to prevent the lens from damage; Dust on the lens surface must be removed by cleaning air-blowing.
• Chemicals, detergents or clean water are prohibited for cleaning to avoid corrosion of the circuit board by rain, moisture and liquids containing minerals.
• The device and its parts, along with its accessories must be placed out of the reach of children.
• The device must be operated in dry and ventilated conditions.
• The device must be stored in temperate places, as high (low) temperatures will shorten its service life. The allowable storage and use temperature is O ~ 40°C.
• The drying of the device in any heating equipment (dryers, microwave ovens, etc.) is prohibited.
• Squeezing or adding shelters on the lop and/or the back of the device is prohibited in order to avoid its damage.
• Dropping, striking or violently shaking the device are prohibited in order to avoid damage to the internal circuit board and optical components
• Dismantlement of the device with autonomy is prohibited. Contact after-sales services of Gammabai for any questions.
• Independent repair of any products is prohibited. Contact after-sales services of Gammabai in a timely manner for consultation or return-to-factory maintenance if there exist any failures of the device or its parts.

Interface introduction

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Installing TV Box

Step1 .Locate the opening on the side of the machine and open it.

Step2. lnsert the TV box into the corresponding connection port

Step3.Cover the side cover to complete the installation

Remote

Instruction :
When the indicator light is red that the remote controls the projector.
When the indicator light is blue that the remote controls the ATV.

Power On/Off

Plug in the device and then click” ” Button to start it.
When the device is working, click ” ” Button to shut it down.

Keystone/ Focus

Projector Setting > Settings > Projection Image Setting

Manual Focus

Press ” ” to enter the Manual Focus.
Press “Left” or “Right” to focus projector.
Press “OK” to end the focus.

WiFi Setting

Projector Setting >Settings> WiFi Setting

iOS Miracast

Projector Setting > iOS Cast

Android Miracast

Android Screen

To connect Android Mobile / Pad with Projector Based on WiFi-Display Technology.

1. 0n your Android device. turn on WLAN(not necessary to connect to any Wi-Fi router)
2. Launch the Multi-screen / Wireless Display / Screen Mirroring / Smart View function
3. Select Artli i-Play4-*** from the searching result list

Projector Setting > Miracast

Bluetooth Setting

Projector Setting > Settings > Bluetooth Setting

Digital Zoom

Projector Setting > Settings> Projection Image Setting > Digital Zoom

Don’t look into the lens while the projector is working!

Caution to the heat from the air outlet!

Artlii Official Website: www.artlii.com

Artlii Customer Service: contact@artlii.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>