Artlii Energon2 Outdoor Bluetooth Projector Instruction Manual

instruction manual

nergon2 Outdoor Bluetooth Projector

Please use your mobile phone to scan the QR code or directly type in the website:
https://shop.artlii.com/2021/06/29/new-eneroon2/ for more details of product operation instructions and videos.

 https://shop.artlii.com/2021/06/29/new- eneroon2/

Safety notice:

1. Please read manual carefully before you use the projector.
2. To ensure stable power supply, please use national standard power cable and power cord with grounding.
3. Please use the same power voltage as the projector marked.
4. Please do not open the projector, otherwise the supplier will not afford warranty service.
5. Do not look directly at the projector lens while the machine is working to avoid damage to your eyes.
6. To avoid clog of the projector vent, please do not cover with cloth, carpet and other materials.
7. This projector does not have waterproof function, please keep it away from rain, moisture and other items containing liquid such as vase, Cup, etc.
8. To prevent power breakdown, please keep the projector away from rain or water or moisture.
9. Turn off and cut off the power supply if do not use this project for a long time.
10. Use the originally foam or other unit-shock material to protect projector, if you need transport this projector.
11. If you find the projector has problems, please contact the supplier, do not repair by yourself
12. To extend the projector life span and protect your eyes, we suggest you to have a break after 3-4 hours using.

Interface Introduction

Remote Control Introduction

Other instruction

4.1 Lifting

4.2 Foot pad adjustment
Gently lift the projector, press the “PUSH” button on the bottom to adjust the height of the foot mat.

4.3 Dust removal from anti-dust Mesh
In order to keep air circulation in the air inlet, please remove anti-dust mesh from the air inlet regularly and install it back to its original position after cleaning. Note, for your safety, please cut the power off before operating.

Focus & Keystone

Projector connection instruction

6.1 Connection introduction

Multi-media connection

7.1 USB interface connection
Insert the USB into the accordingly slot. (refer to picture below), Choose multi-media signal source , Choose the content which you need display: Movie, Music, Photo, Text.

7.2 Miracast settings
7.2.1 After turning on the projector for around 2-5 seconds the main interface will appears on the screen.
To do this, select the MultiScreen feature in the Input Source page. Please refer the picture 1 and 2 as below.
You can wirelessly connect your iPhone, Android phone and computer to the projector or wird connect with your iPhone and share your screen.

7.2.2 Windows cast
Select Windows miracast

1. Your device MUST be on the same Wi-Fi network as the projector. Or connect the computer device to the wireless network sent by the projector.
2. Find the settings menu on your computer to access your display device or screen mirroring to connect the screen receiving device.

7.2.3 iOS Cable Cast
Select iOS Cable Cast

1. Please connect Apple devices with USB interface of projector by Apple data cable(refer to picture 1 ). NOTE: If the connection is right, Apple devices will popups a ‘Trust This devices’ message, please select “Trust”(refer to picture  2).
2. Enter a Apple devices password for mirroring.

7.2.4 Android Miracast
Select Android Miracast

1. Choose the android maracas on the home page. Select the wireless display settings function on android phone.
   NOTE: Different android phones have different ways of opening multi- screen function. Please refer to the instructions of android phones for details.

2. Select the corresponding projector device name.
   NOTE: Please make sure the mobile phone and the projector are on the same network (Different projector shows different name, please focus on the actual situation.)

7.2.5 iOS miracast
Choose the iOS miracast on the home page.
NOTE: Apple devices for screen mirroring or projector upgrade software for the first time, the projector needs to be activated through networking.

1. Please make sure the IOS device and the projector are on the same network, Or connect the IOS device to the wireless network sent by the projector.
2. Enter the control center on the IOS device terminal and click Screen Mirroring.
3. Select the name of the corresponding projector.

Bluetooth Setup

If you want to connect a Bluetooth device, you can go to setup—Bluetooth—Scan to select your Bluetooth device, and confirm the connection.
You have to set your Bluetooth device in pair mode firstly before scan.
When you are trying to connect to a Bluetooth device, please make sure the Bluetooth device is in Pair Mode before you click the scan button. You can find the method to set up Pair Mode in the Bluetooth device’s Instruction.
«Bluetooth is a technology transmitting Audios, but not Videos.
If you want to cast your device’s screen, please go to the homepage and use the function “iOS cast” or “Miracast”.
*This projector’s Bluetooth can connect with Bluetooth speakers\Earphones\Soundbar, but not with Phones\Computers.

Settings menu

9.1 Picture settings
Choose the “Setting” of home page, find the picture setting, you can set up the projection mode, image scaling, aspect ratio, picture settings.
9.2 System settings
Choose the “Setting” of home page, find the system setting,you can set up the language selection , Software upgrade,Restore factory settings,Auto sleep.

9.3 Other settings
9.3.1 Enter to home page,select settings and choose connection settings,then you can connect to WiFi
9.3.2. Enter the page of WiFi network as below picture,select your wireless network from the list and connect to WiFi.

Scan to watch the instruction video.

https://shop.artlii.com/2021/06/29/new-energon2/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>