JOLUX LED Spring Hook Retrofit Downlight Installation Guide

JOLUX LED Spring Hook Retrofit Downlight

INSTALLATION INSTRUCTIONS

1. Turn power off

2. Remove previous fixture or bulb

3. Use the right angle side of short spring to hook the ring of E26 adaptor![4. Screw in the E26 adaptor into the open socket

4. Plug in the quick connector](https://manuals.plus/wp-content/uploads/2023/11/JOLUX-LED-Spring-Hook-Retrofit-Downlight-fig-2.jpg)

5. Screw in the E26 adaptor into the open socket

6. Plug in the quick connector

7. Pull another side of spring to hook the ring on lamp backside

8. Release the lamp to be flush with ceiling

9. Turn power on and test

Spring Adjustment

• One long spring hook When the distance from the lamp socket to the ceiling is greater than 5.71 inches.
• One short spring hook When the distance from the lamp socket to the ceiling is between 5.12 and 5.71 inchese
• Two short spring hooks: When the distance from the lamp holder to the ceiling is less than 5.12 inches

WARNING

• Risk of fire or electric shock. LED Retrofit Kit installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
• Install this kit only in luminaires that have the construction features and dimensions shown in the photographs and/or drawings and where the input rating of the retrofit kit does not exceed the input rating of the luminaire.
• Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>