JHK C-2457 Ergonomic Computer Desk Chair Instruction Manual
- June 14, 2024
- JHK
Table of Contents
JHK C-2457 Ergonomic Computer Desk Chair Instruction Manual
ASSEMBLY GUIDE
Congratulations, you are now the owner of the new chair! Before enjoying the comfortable chair, you have to assemble it. This assembly guide will take you through the basic assembly process. To make sure your assembly progress goes smoothly, please follow the assembly instructions especially the important safety information. It is possible to assemble the chair by your own, while having a second person to help you will make it easier. Please check if there are any missing parts in the package before start. If there are any issues, please don’t hesitate to drop us an email and we’ll help you ASAP. If you run into any difficulty during the assembly, remember to check out the assembly Video to see if you’ve missed something. If you’re still unable to resolve your problems , drop us an email and our support team will assist you.
https://qygjuser.s3.us-east-2.amazonaws.com/HL/2457.mp4
⚠ WARNING To ensure proper assembly, please follow all steps and use all parts. Failure to follow this warning can result in serious injury to yourself or others.
Package List
Without further ado, we kindly suggest you to list all parts needed for the chair first.
Assembly Instruction
Instructions For Use
1. Seat Height: Paddle-shaped lever on the right side
- At the proper height, your feet should rest flat on the floor.
2. Tilt Tension: Long stem under the seat with knob
* Set the tilt
tension to control the resistance you feel when leaning back.
3. Operating the tilt lockout
To let your chair tilt back, pull the control handle out. To stop your chair
from tilting, sit forward, then push the control handle in.
Safety And Maintenance
- Do not stand on the chair, Do Not use the chair as a stepladder.
- Use this product for seating one person at a time.
- Do not use the chair unless all bolts and screws are firmly secured.
- Avoid contact with sharp objects to prevent puncturing the fabric.
- Every 6 months, check all bolts and screws to ensure they are tight.
- To clean, spot clean only using a damp towel and mild cleaner, first test on a small, unseen area of fabric.
- Chair weight limit not to exceed 250 lbs.
Safety Information
Limited Warranty
The producer promises to repair or replace any chair that is found to be defective in material or workmanship within one(1) and year from the date of original purchase so long as you, the original purchaser, still owns it. This is your sole and exclusive remedy. This warranty is subject to the provisions below.
EXCLUSIONS:
This warranty does not apply and no other warranty applies to: Normal wear and
tear, which are to be expected over the course of ownership. Misuse, abuse, or
excessive use of the product. Modifications or attachments to the product that
are not approved by the manufacturer. Products that were not installed, used
or maintained in accordance with product instructions and warnings. Products
used for rental or commercial purposes. Damage caused by the carrier in-
transit is handled under separate terms.
SEATING USAGE:
Normal use for seating is identified as the equivalent of a single shift,
forty- (40) hour workweek. To the extent that a seating product is used in a
manner exceeding this, the applicable warranty period will be reduced in a
pro-rata manner. Some retailers might have custom models imported directly
from the factory and therefore are not supported by our local service team
because we don’t have the correct parts, please contact your retailer directly
for support. If you have any questions about that we will be happy to assist
and identify those items.
RETURN POLICY
We adopt a 30 days return policy which means that all products purchased on
this website may be returned to us within the timeframe. You need to contact
us within 30 days after the product(s) came into your possession and the
product(s) must be returned to us without any undue delays. Returned products
must be returned in the same condition as they were sent and they must be sent
in its original packaging. If the product is not faulty, (i.e. if you changed
your mind or if you are unhappy with the product for some other reason), the
cost of shipping will all on you. And it is your responsibility that the
package arrives safely to us so we recommend that you use a courier service
where it is possible to track the shipment. If the product is faulty when you
receive it please contact us and we will help you out (see more information
under Manufacturer Warranty). We reserve the right to give a partial refund in
cases when the product(s) is not in an unused condition, is damaged or has
missing parts not due to our error.
HOW RETURNS WORK
Contact us through the contact form on our website and attach the invoice to
the message as proof of purchase. And please also write the reason for return.
We will then get back to you as soon as possible with information on where to
send the product(s). As soon as we have received the product(s) and made an
inspection we will inform you of our decision. If a refund is approved we will
automatically credit the purchase to your credit card or original method of
payment. If the product(s) is damaged, not in its original condition or
missing parts we will inform you if you are eligible for a partial refund.
This is decided from case to case depending on the severity of the damages or
what parts are missing.
HJ-Customer-Service@outlook.com
(909)637-7665 | (909)637-7593
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>