EVOLVEO Sonix Pro Wireless Door Sensor User Guide
- June 14, 2024
- Evolveo
Table of Contents
EVOLVEO Sonix Pro Wireless Door Sensor User Guide
Product Description
This product consists of a transmittier and a magnetic stripe; when the magnetic stripe box is removed, the transmitter will send a wireless alarm signal to the host. It can be installed on doors, windows or other objects that can be opened and closed.
Function & Characteristics
- Ultra-thin fashion design, suitable for a variety of door / window installation.
- Shell buckle design, easy installation.
- Imported chip, ultra-low power consumption, stable performance.
- Huge capacity lithium battery, inside standby time more than 1 year.
- With tamper alarm, low voltage Alert function.
Product Schematic
Installation Guide
- Open the transmiter botton cover, remove the battery insulating trip, then power on;
- Install on door or window that can be opened / closed and keep the installation position dean;
- Generally the transmitter (A) is mounted on a fixed door frame, the magnetic stripe (B) is mounted on the active door, and align the magnetic stripe and transmitter according to the indication. The distance between the two parts should not be more than 10 mm.
- In order to install more firmly, should use double-sided adhesive to fix at the bottom;
Test And Code
- Newly purchased doors and windows detectors, need to code to the alarm host before use. (Please refer to the alarm host manual)
- The door/window detectors in the kit are well coded to the alarm host, can be directly used.
- After installation, open the doors/windows, the red light on the transmitter (A) on for 1 second, indicating working properly.
Battery Low Voltage
When the battery voltage is lower than 2.3V, the transmitter will send low voltage code to the alarm host, meanwhile, LED lights on, reminding the user must promptly replace the battery, otherwise there may be alarm report lost.
Transmitter Tamper Alarm
When the transmitter is damaged or illegally opened, it will send a tamper alarm code to the alarm host, reminding the user to notice.
Note: The functions of items 6 and 7 must be used with the alarm host!
Technical Parameters
- Operating voltage: DC 3V (3V CR2450 lithium battery)
- Standby current: ≤5uA
- Alarm current: ≤15mA
- Working temperature: -10~+55 °C
- Relative humidity: ≤ 80% No condensation
- Transmission frequency: 315/433 MHz optiona
- Encoding format: EV1527 / PT2262 optional
- Launch distance: 80 meters in open places
- Transmitter size: 50mm 35mm 17mm
- Magnetic stripe size: 48mm13mm 17mm
Disposal
The crossed container symbol on the product, in literature or on the packaging
means that in the EU all electric and electronic devices, batteries and
accumulators must be disposed of in sorted waste at the end of their working
life. These products must not be disposed of as unsorted municipal waste.
Declaration of Conformity
Abacus Electric, s.r.o. declares that EVOLVEO Sonix PRO wireless door sensor
is in compliance with the requirements of the standards and regulations
applicable to this type of device.
The full text of the Declaration of Conformity can be found at https://ftp.evolveo.com/CE/
Copyright © Abacus Electric, s.r.o.
www.facebook.com/EvolveoCZ
www.evolveo.com
Dovozce / Výrobce – Dovozca / Výrobca Importer / Manufacturer – Importőr / Gyártó:
Abacus Electric, s.r.o.
Planá 2, 370 01, The Czech Republic
Made in China
All rights reserved.
The design and specifications are subject to change without prior notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>