Waterdrop ZR-017 Pitcher Water Filter Instruction Manual

Waterdrop ZR-017 Pitcher Water Filter

Product Information

Specifications:

• Economical alternative to expensive substitutes
• Easy installation and operation
• Provides cleaner, fresher water by reducing impurities
• Does not remove minerals that may be beneficial to health

Installation Instructions:

General Installation Guidelines:
The filter connectors are larger to prevent leaks. You might have to twist the filter hard to make sure the connection is secure.

Step-by-Step Installation:

1. Remove the lid and water reservoir from the top of the dispenser/pitcher and remove the filter from packaging.
2. Screw the filter tightly into the bottom of the reservoir to obtain a complete seal with the o-ring.
3. Fill the reservoir with cold tap water and place the lid on top.
4. Allow all water to pass through the filter before filling it again. Discard the first pitcher of filtered water.

FAQ:

• Q: Can this filter be used with water of unknown quality?
  A: No, this filter should not be used with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

• Q: How should I store and maintain the filters?
  A: Stored filters do not expire. Keep your unused filters in a cool, dark, and dry place until you need them. As the TDS  concentrations vary in different regions, the service life of the filter might change accordingly. Please replace your filter in  time.

• Q: How often should I replace the filter?
  A: Replace the filter once a month, even though it has not reached its filtering capacity, to prevent bacteria and fungus growth in your filter, supply lines, and storage tank. When the TDS water meter reads 006, it’s also time to replace your filter.

• Q: What is the expected lifespan of the filter?
  A: The expected lifespan varies depending on the TDS level of the water. Here are the general ranges:

  • Tap water TDS 000-001: N/A
  • Tap water TDS 002-050: 40 gallons or more
  • Tap water TDS 051-200: 25 to 40 gallons
  • Tap water TDS 201-300: 15 to 25 gallons
  • Tap water TDS 301-400: 8 to 15 gallons
  • Tap water TDS 400+: 8 gallons or less

Note that these ranges are approximate and can vary based on the local water quality.

A replacement for the following water filter: Zerowater® filter ZR-017

Filter features

• Economical alternative to expensive substitutes.
• Easy installation and operation.
• Provides cleaner, fresher water by reducing impurities.
• Does not remove minerals that may be beneficial to health.

General installation guidelines：
The filter connectors are larger to prevent leaks. You might have to twist the filter hard to make sure the connection is secure.

Installation instructions

1. Remove the lid and water reservoir from top of the dispenser/pitcher and remove the filter from the packaging.
2. Screw the filter tightly into the bottom of the reservoir to obtain a complete seal with the o-ring.
3. Fill the reservoir with cold tap water and place lid on top. Allow all water to pass through the filter before filling again. Discard the first pitcher of filtered water.

Caution:

This filter should not be used with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Storage and maintenance

• Stored filters do not expire. Keep your unused filters in a cool, dark, and dry place until you need them.
• As the TDS concentrations vary in different regions, the service life of the filter might change accordingly. Please replace your filter in time.
  Tap water tds| Contaminant level| Description| Expected quantity of per filter
  ---|---|---|---
  000-001| Meets FDA definitions of purified bottled water| Unknown municipalities| N/A
  002-050| Moderate| Naturally occurring in only a few cities. Can still have dangerous impurities such as lead.| 40 gallons or more
  051-200| Typical Range| Most water in the USA falls into this grouping.| 25 to 40 gallons
  201-300| High| Expect slightly lower capacity.| 15 to 25 gallons
  301-400| Exceptionally High| Most users will notice shorter filter life.| 8 to 15 gallons
  400+| Extreme| The highest TDS water. Expect lower capacity when reducing your water to 000.| 8 gallons or less
• When the TDS water meter reads 006, it’s time to replace your filter.
• Replace the filter once a month even though it has not reached it’s filtering capacity to prevent bacteria and fungus growth in your filter, supply lines, and storage tank.

Warning:

• If the water is not passing through the filter, remove it and shake it up and down before putting it back to place. Zerowater® is a registered trademark of Zero Technologies, LLC.
• Zerowater® is used for reference purposes only.
• The service life mentioned above is subject to chlorine reduction.
• The actual result varies according to the local water quality.

Manufacturer Technical Support
Tel : 1-888-352-3558 (U.S.)
E-mail : service@water- filter.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>