marta MT-2000 Electric Thermo Pot User Manual
- June 14, 2024
- MARTA
Table of Contents
**marta MT-2000 Electric Thermo Pot User Manual
**
DESCRIPTION
- Lid opening button
- Water dispense button
- Pump lock button
- Handle
- Water gauge
- Control panel
- Housing
- Pump unlock LED-indicator
- Timer button
- Temperature select button
- Reboil button
- LED-indicator of boil function
- LED-indicator of keep warm function
TECHNICAL SAFETY
When using electrical appliances, basic safety precautions should always be observed including the following:
- Before connecting the appliance, check if the voltage indicated corresponds with the mains voltage in your home.
- To protect against electrical shock do not immerse body, cord or plug in water or other liquid.
- Place the airpot on a flat surface, at least 30 cm away from stove or other heat source.
- Do not fill any liquid except clean water.
- Do not fill water directly from a tap water faucet. Use a pitcher or kettle to keep electrical parts safe from splashes of water.
- Never plug into the power source without filling the pot with water. Do not over fill the pot with water and always check if the water level needs new supply.
- Avoid splashes of water on the airpot’s body especially on the top portion to prevent electrical shocks. In accidental case of water splashes, wipe it dry immediately.
- Do not let cord hang over edge of table or counters, or touch hot surfaces.
- Do not operate any appliance with damaged cord or plug or after the appliance malfunction of has been damaged in any manner.
- In case of damaged mains cord, it must be replaced by a repair shop authorized by the manufacturer.
- Keep the airpot away from children, handicapped and elderly persons. They should be supervised if they are going to dispense water from the airpot to prevent accidents and burn injuries.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting or taking off arts.
CLEANING AND MAINTENANCE
When cleaning the airpot, make sure to unplug from the power source and the
hot water has cooled down completely before taking it out from the airpot. It
is advisable to clean the airpot inside and outside before using for the first
time.
Cleaning the airpot scheduled once a month or as desired to ensure water
quality and to lengthen service life of inner pot.
When the airpot is not going to be used for a long time, it should be cleaned
and dried before sealing in a plastic bag and stored in a safe, dry place.
TECHNICAL SPECIFICATION
WARRANTY DOES NOT APPLY TO CONSUMABLES (FILTERS, CERAMIC AND NON-STICK
COATING, RUBBER SEALS, ETC.)
Production date is available in the serial number located on the
identification sticker on the gift box and/or on sticker on the device. The
serial number consists of 13 characters, the 4th and 5th characters indicate
the month, the 6th and 7th indicate the year of device production. Producer
may change the complete set, appearance, country of manufacture, warranty and
technical characteristics of the model without notice. Please check when
purchasing device.
MANUFACTURER: COSMOS FAR VIEW INTERNATIONAL LIMITED – ROOM 701, 16 APT,
LANE 165, RAINBOW NORTH STREET, NINGBO, CHINA
MARTA MT-2000 230 V ~ 50 Hz
Power supply
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>