BLUETOUCH BT501 Electric Scooter Instruction Manual
- June 14, 2024
- BLUETOUCH
Table of Contents
**BLUETOUCH BT501 Electric Scooter Instruction Manual
**
Dear Customer,
Welcome to the family of e-scooter fans. We thank you for choosing the
BLUETOUCH e-scooter and we hope that you will appreciate the opportunities
offered by this e-scooter every single day.
We emphasized the fine-tuning of every detail and consistently tested all
parts during the development of the BLUETOUCH e-scooters. The result is a
precisionengineered machine that will offer you mobility, comfort and freedom
in the most economical form of transportation. This revolutionary and stylish
vehicle is easy to transport, ecological and economical.
You will no longer deal with parking spaces, crowded public transport and operating costs. The BLUETOUCH e-scooter offers the ideal riding features, easy handling with the flexibility to be wherever needed and last but not least, highly economical operation.
Enjoy riding happily with the new BLUETOUCH e-scooter and return home safely.
More information and manual in electronic form for download atwww.bluetouch- scooters.com
BLUETOUCH is a registered trademark.
The content of the box consists of:
- e-scooter BT501
- instruction manual
- 6 screws
- allen key
- charger
Notice
You are fully responsible for the use of your e-scooter. Handle the
e-scooter according to the recommendation in this manual. Follow the safety
instructions to avoid potentially dangerous situations.
Same as other sports, the possibility of injury and damage to the product
should be taken into account while riding the e-scooter. It is very important
to remember all safety rules.
Safety Instructions
-
If you do not use the e-scooter for a long time, recharge it to 60 % of the battery capacity once every 30 days.
-
This product is for only one person’s use, do not carry more people on the e-scooter!
-
Observe your health and safety and use your helmet while riding.
-
Do not exceed the permitted capacity.
-
Charge the battery 6 hours before initial use.
-
Practice riding in the open air, use the device only after thorough familiarization.
-
Turn off charging before riding.
-
Do not use at temperatures below 5 °C.
-
Place your feet on the deck of the e-scooter while riding.
-
Please ride slowly down hills.
-
Do not ride on broken or wet roads or on roads covered by snow or ice.
-
Do not use the e-scooter in the rain, if you have to do so in a special case, reduce the speed to under 10 km/hr. Avoid sudden braking that could lead to skidding.
-
Do not allow the e-scooter stand in water or spray water directly on the e-scooter while washing. The water jet could damage the engine and electronic components of the product.
-
Do not attempt to use the e-scooter to jump and other dangerous tricks that significantly increase the risk of injury and damage to the e-scooter.
-
Do not use this product if it is exposed to sunlight for a long time.
-
The e-scooter user must practice good judgment and common sense to avoid the risks and dangers he/she may encounter when using the e-scooter.
-
An e-scooter is not approved for road use.
-
The user may not use the e-scooter under the influence of alcohol, drugs or medication or other substances that may cause loss of attention.
-
Riding on a on e-scooter is not recommended for pregnant women or persons under 16 years of age.
-
It is possible that your insurance does not cover damage to the e-scooter or the injury caused by using this device. For more information, contact your insurance company before using the e-scooter.
-
The user must comply with applicable local traffic regulations when riding an e-scooter.
In the event of unauthorized use on public roads, including cycling paths, the user is at the risk of fines or even criminal prosecution in the event of an accident. -
Neither the Seller nor BlueTouch, s.r.o. assumes any liability for damages, loss of property, injury or legal disputes arising from failure to comply with the information in this manual or disregard of traffic rules.
-
Make certain that you have read and understood this manual well before riding the e-scooter. Pay full attention to riding when on the e-scooter. You may not use the e-scooter unless you have carefully read this manual.
-
This instruction manual includes basic operating instructions for the BLUETOUCH e-scooter and cannot describe all situations in which injury or death may occur.
Please note that the manufacturer is not liable for accidental or consequential damages caused directly or indirectly by the use of this product.
Appearance
- Brake
- Grips
- Headlight
- Bell
- Multifunction display
- Accelerator
- ON/OFF button
- Hook
Features of Individual Components
- Front LED headlight
- Front wheel suspension
- Front 10“ solid tyre
- Wiring harness
- Quick-release locking nut
- Folding mechanism lock
- Battery charging connector
- Footstep
- Rear 10“ solid tyre
- High-performance brushless motor
- 3D rear reflector
- Support stand
- Suspension
- Plastic pad for number plate
- Drum brake
- Reflective strip
- Light
- RGB light
Main Components
-
Quick folding system
-
3D reflector
-
Deck with non-slip tread
-
Rear suspension
-
Connector for charger
-
Front drum brake
-
Multifunction display
-
Bell
-
Quick-release sheath detail
-
Stand
Handling with multifunction display
-
Display description
-
Acceleration indicator;
-
walking speed mode;
-
e-scooter lock in the app;
-
cruise control;
-
engine overheat indicator;
-
Bluetooth;
-
lights up;
-
eco mode;
-
driving mode;
-
fast mode;
-
low battery indicator;
-
battery charge indicator;
-
total mileage;
-
current speed;
-
V: current-voltage;
A: current -
Display operation
A: Long press the ON/OFF button, the display is activated.
B: Switch the light on/off: Press the ON/OFF button 1 time shortly.
C: Change speed mode: Press the ON/OFF button 2 times briefly.
— walking mode
E — eco mode
D — driving mode
S — highest speed mode
D: Change km/V/Ah units: Press the ON/OFF button 3 times briefly. -
Cruise control
Cruise control is activated when the power/speed is maintained for about 6–10 seconds: the symbol appears on the display. Cruise control maintains engine power (speed may vary depending on terrain, for example) without holding the throttle.
The cruise control feature is canceled by pressing the brake or throttle lever.
The symbol disappears from the display. The cruise control function can be removed in BT501 application. -
Error messages
Error | Cause | Solution |
---|---|---|
E5 | Throttle lever malfunction | Release the accelerator.Turn the e-scooter off |
and on.Replace the accelerator. If the fault persists, contact the service
center.
E4| Malfunctioning brake system| Release the brake pedal.Turn the e-scooter
off and on. Replace the brake lever.
E3| The engine hall probe is abnormal| Check if the motor plug is loose. Check
the motor cable for damage. If the fault persists, contact the service center.
E1| An obstacle that the scooter cannot overcome| Release the gas pedal and
stop braking. Turn the e-scooter off and on. Replace the brake lever. If the
fault persists, contact the service center.
EO| Communication error| Check the display. Contact the service center.
BL| Low voltage| Recharge the battery. Turn the e-scooter off and on. Update
the firmware in your app. If the fault persists, contact the service center.
HL/BL/BP| High voltage warning
Surge warning| Check that the battery is charged. Test the e-scooter at low
speed. Avoid sudden braking.Turn the e-scooter off and on.Check if the
firmware has been updated.If the fault persists, contact the service center.
H1| Engine overheating| Switch off the e-scooter, or drive to the destination
only at a low speed and without overcoming the elevation.Turn on the electric
scooter. If the fault persists, contact the service center.
H2/H3| Overheating of the control unit| Switch off the e-scooter, or drive to
the destination only at a low speed and without overcoming the elevation.Turn
on the electric scooter. If the fault persists, contact the service center.
LR| Overcurrent| Release the brake lever. Turn the e-scooter off and on. If
the fault persists, contact the service center.
S1| A short cut| Turn off the engine.
Turn the e-scooter off and on.
If the fault persists, contact the service center.
S2| The MOS tube is not working properly| Restart the e-scooter, but do not
move it during the restart.
Replace the control unit with a new one.
SN| Missing serial number| Check for firmware update. Reset the serial number.
BT501 mobile app
With the BT501 mobile app, you can expand your control over your electric
scooter.
You can turn on the lights, set the speed mode, and cruise control.
You can see the battery level, how many kilometres you have covered, or
perhaps the battery temperature. In short, you get an overview. And your
electric scooter you can even lock your scooter with a password.
-
Download the BT501 app for free in Google Play or the App Store.
Click here for more information:
-
When connecting to the e-scooter, keep the location activated on your mobile phone and keep the e-scooter within Bluetooth range.
-
Switch on the e-scooter. Bluetooth is automatically activated on the e-scooter‘s display. The icon lights up green.
-
Update the firmware in the app on your phone before using it for the first time.
The update will give you access to the latest version of the BT501 app.
E-scooter handling
Assembling
- Straighten the front bar and fasten the safety lock.
- Connect the cables inside the front bar. Fit the handlebars to the front bar.
- Use the included Allen wrench and screw in allscrews.
- After tightening all screws press the ON/OFF button for long time to start the scooter.
Unfolding
Step 1
- Straighten the handlebars until you hear a click of the folding mechanism.
Notice
Be careful when handling to avoid unnecessarily damage the opening mechanism.
Step 2
- Fasten the safety lock.
- Make sure that the safety lock is fully secured.
Before each ride, make sure the safety lock is fully inserted in the folding mechanism, otherwise you risk personal injury and damage to the tipping mechanism itself.
Give your e-scooter a short time to adjust and set all moving parts such as hinges and brakes in the correct position.
Tipping/folding
- Release the safety lock
- Fold the e-scooter bar comfortably towards the rear wheel until you hear a click indicating the folding mechanism is locked.
Then you can carry the scooter comfortably.
Charger and battery
Charger
The charger contains protection against overcharging, which automatically
stops charging when recharged at 100% capacity
Battery charging instructions:
- Connect the charger to the AC adapter on the e-scooter (on the right side below the foot deck).
- Insert the plug into the socket (AC 100–240 V).
- Check that the power cord is plugged into an electrical outlet.
- When connected to the network, the red indicator light lights up – the e-scooter is charging. When the light turns green, the e-scooter is already recharged and ready for use. The best time to use the e-scooter for maximum energy use is 2 hours after recharging. Fully charge for 8 hours to maximize battery performance.
Unplug the e-scooter from the socket before installing or performing
maintenance.
It is not safe to handle the e-scooter when plugged into an electrical outlet.
An electric shock can cause serious injury and damage the e-scooter.
Do not attempt to open the battery in any manner. Do not insert any object
into the battery or attempt to open the battery cover or insert any tool into
the battery compartment, as this may result in electric shock. Injuries, burns
or fire can result from attempting to open the battery case. The toxic
substances contained in the battery may be released.
Always use the original charger.
This product is equipped with a high quality LG lithium battery, which is
rated for min. 800 individual charges.
Handling of battery
- Do not start the engine during charging!
- The light signaling is intended only for indicative information on the battery charge status.
- Do not fold the e-scooter for longer than two months with a fully charged battery.
- Fully discharge the batteries (red LED control) until the e-scooter stops completely and turns off from time to time.
Do not use e-scooter if you believe:
- that the main panel is broken;
- the battery emits an unusual odor or is overheating;
- any liquids are leaking from it.
Avoid contact with the substance leaking from the battery. Keep the battery away from children and pets. Exposure to battery voltage can cause death or serious injury.
Using, storing or charging the e-scooter battery outside the specified conditions may void the warranty, damage the battery, or ineffectively charge the battery.
Riding the e-scooter
Preparation before riding
-
Find a suitable place.
-
Unfold the e-scooter according to the specifi ed instructions.
See Step 2 Folding the e-scooter. -
The front light is not rigidly attached to the frame for safety during transport.
Screw the light to the frame and set it in the correct position.
Then tighten the fastening screw. -
Ascertain that the handlebar is parallel to your body before starting the e-scooter.
-
Before using the e-scooter, visually check that all nuts and bolts are tight and in place. If a component is missing or shows signs of wear or tear or you are not sure about the technical condition, bring the e-scooter to an authorized service center for inspection.
-
Always check the brakes and mechanical functions before each ride.
-
Ascertain that the safety switch is inserted into the center of the folding mechanism and all locks are secure.
Riding on the e-scooter
-
Press the power button (ON/OFF) for more than 3 seconds to activate the e-scooter.
-
For a safer start, start with the help of another person.
First place one foot on the deck of the e-scooter, leaving the other foot securely on the ground. Slowly press the throttle. -
When the e-scooter starts moving, place the other foot on the e-scooter, press the throttle, accelerate.
-
To activate the electric e-scooter drive from zero speed, it is necessary to push off several times from the ground to achieve a certain speed. You can then use the control levers on the handle to add gas and accelerate the e-scooter.
-
When braking, tilt your weight backwards so that the braking effect comes across the legs rather than the handlebars and steering.
TIP: To accelerate, ti
Stopping the e-scooter
Squeeze the brake slightly to reduce power to the engine and reduce the speed.
Place one foot on the ground after braking. Never abruptly brake or stand on
the brakes, it may lead to faster wear on the braking mechanism and
consequently reduce comfort from riding.
Automatic shutdown
When the e-scooter is stopped (speed = 0) and you do not intervene with the
display for more than 3 minutes, the system will automatically shut down and
save energy.
E-scooter maintenance
The e-scooter is assembled by professional technicians. Any attempt to disassemble and repair the e-scooter or its parts separately may damage the electric e-scooter and void the manufacturer’s warranty upon delivery.
Lubrication
Every six months regularly maintain the folding system and lubricate the
moving parts, especially the handlebar folding mechanism with a small amount
of lubricating oil. Do not use WD40 and do not lubricate the wheels.
Brakes
The brakes are already directly set from production.
Troubleshooting
If the e-scooter is not working normally, check the following:
the e-scooter appears to start; the battery capacity on display; that the
brake is released; whether all connectors and sockets are clean; whether an
error message appears on the display. If the aforementioned operations are
performed and the product is still unable to operate normally, consult your
dealer.
Product parameters
Product specifications
Model| | BT5001
total dimensions (max.)| 127,5 × 65 × 125 cm
weight of scooter including battery| 28 kg
Performance| engine power| 500 W
highest load| 120 kg
max. speed| ~45 km/hr.
climbability| 15°
riding range| 50–60 km
Battery parameters| battery type| lithium battery LG
Voltage| 46,8 V
capacity| 21 Ah
Charging parameters| input voltage| AC 100~240 V
charging time| ~8 hrs.
Lighting| front| yes
rear| yes
Tires| tire size and type| 10” non-inflatable
- Speed and range depend on the rider’s weight, terrain layout, number of starts, driving style and battery wear.
Warranty
If there is a problem with the product, the product distributors will provide
product quality warranty within full after-sales support. Some components are
covered by a limited warranty. The warranty does not cover regular wear and
tear.
Final provisions
If for the reasons specified below the functionality of some components fails, the manufacturer bears no responsibility and these defects are not subject to an authorized claim.
- Use is not in accordance with the operating instructions.
- Failure to perform proper maintenance and protection.
- Dangerous use of the e-scooter, e.g. for other purposes.
- Any disassembly or use of non-original spare parts.
- Use of a wrong or non-original spare part.
- Using a non-original charger.
- Damage during a traffic accident.
- Improper or unauthorized use.
- Natural disasters or other causes caused by force majeure.
This product is for recreation and entertainment use only, never use it as a
regular means of transport. Blue Touch, s.r.o. continuously updates the
appearance of the product, conducting changes in the settings of features and
parameters, without further information on changes.
We reserve the right to perform these changes.
The manufacturer and importer of this electrical device is Blue Touch, Ltd.
EC Declaration of Conformity
Manufacturer: BlueTouch, s.r.o., Zelený pruh 1974/109, 140 00 Praha 4
Name and address of the person authorised to compile the technical file:
Petr Novák, CEO, Zelený pruh 1974/109, 140 00 Prague 4 – director
Description and identification of the machinery:
Electric scooter | Type: BT 501
Electric scooter is used for passenger transport and it is not approved for
riding on the roads.
The machinery fulfils all the relevant provisions of this Directive:
Directive 2006/42/EC – Machinery
EN ISO 12100:2010, EN 60204-1:2018
Directive 2014/35/EU – Low Voltage
EN 60335-1:2012 + A11:2014, EN 62233:2008
A reference to the harmonised standards: EN ISO 12100: 2010, EN ISO
14118: 2018, EN
60204-1: 2018, EN 6100-6-3: 2007+ A1: 2011+ AC: 2012, EN IEC
61000-6-1: 2019 EN IEC
61000-3-2: 2014, EN 61000-3-3: 2013
in Prague, April 20th, 2023
Petr Novák
bluetouch.cz
www.bluetouch-scooters.com
www.bluetouch.sk
www.bluetouch.hu
References
- BLUETOUCH - elektrokoloběžky bez kompromisů
- BLUETOUCH - elektrokoloběžky bez kompromisů
- BLUETOUCH - elektrokoloběžky bez kompromisů
- BLUETOUCH
- BLUETOUCH
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>