EPSON EH-LS650B Home Cinema Projector User Guide
- June 14, 2024
- Epson
Table of Contents
- EPSON EH-LS650B Home Cinema Projector User Guide
- Note:
- Contents
- Placing the projector
- Connect the projector
- Android TV®
- Chromecast built-inTM
- Google AssistantTM
- Video device or computer
- Note:
- Connect audio
- Built-in speakers
- Optical Out audio port
- Turn on your projector
- Install your screen
- Adjust the image
- Using the remote control
- Troubleshooting
- Registration
- Where to get help
- Manual
- Internet support
- Telephone support services
- Optional accessories
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
EPSON EH-LS650B Home Cinema Projector User Guide
Quick Setup
IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User’s Guide.
Note:
- Your product may differ from the illustrations on this sheet, but the instructions are the
- Availability of products, product features, and/or accessories varies by
Contents
Remove all packing materials and make sure your projector box includes all of these parts:
You can place the projector on almost any flat surface. See the online User’s Guide for more information.
Placing the projector
Before proceeding with setup, move the furniture you will place the projector
on to its final location. This will give the furniture time to settle into the
floor as needed, which is especially important for softer surfaces like
carpets and rugs.
Note: The distance from the top of the projector to the bottom of the
projected image is 9.3 inches (23.5 cm) for a 100-inch image and 11.6 inches
(29.4 cm) for a 120-inch image.
- Place the furniture based on the distance measurements indicated below.
Distance from wall or screen to:| 100-inch image| 120-inch image
---|---|---
A – Front of projector| 26.6 inches (67.6 cm)| 31.6 inches (80.2 cm)
B – Rear of projector| 10.9 inches (27.6 cm)| 15.8 inches (40.2 cm) - If your furniture has adjustable feet, use them to level the furniture (allow time for settling as needed).
- Place the projector on top of your furniture and align it with the expected center of the wall or screen you will project
Connect the projector
Android TV®
Your projector includes built-in Android TV with apps that can be launched when the remote control is paired to the projector. To stream content, make sure you have a wireless internet connection and an active streaming account and log in as necessary for each app.
Chromecast built-inTM
You can stream content from devices using Chromecast™-compatible apps. See the online User’s Guide for details.
Google AssistantTM
You can send voice commands to the projector using the remote control. See the
online User’s Guide for details.
Note: This feature may not be available in all regions.
Video device or computer
You can connect video equipment or a computer. Connect one end of an HDMI®
cable (not included) to one of the projector’s HDMI ports and the other
end to an HDMI port on your video device or computer. See the online User’s
Guide for details.
Caution: Do not turn on the video source before connecting it to the
projector; you may damage the projector.
Note:
- Some external video sources may require an optional HDMI adapter
- If you are connecting an external audio/video receiver to the projector, use the projector’s HDMI2 (eARC/ARC) See the online User’s Guide for more information.
- If you are connecting using ARC or eARC, you must use a High Speed HDMI Cable with
- For more information on connecting the projector to your computer or other devices (camera, USB flash drive, ), see the online User’s Guide .
Connect audio
Built-in speakers
The projector has built-in speakers that can play audio from the video source
you are viewing.
You can also use the projector’s speakers to play sound from a device
connected via Bluetooth®. See the online User’s Guide for details.
Optical Out audio port
You can connect the projector to an amplifier or speakers through the Optical Out port. See the online User’s Guide for more information
Note: The Optical Out volume level is not controlled by the projector’s remote control. See the online User’s Guide for more information
Turn on your projector
Note: If you are projecting from an external video device or a computer, make sure it is connected to the projector first and turn it on after the projector is turned on.
-
Install the batteries in the remote
-
Plug in the projector
-
Press the power button on the projector or remote The status light flashes blue and then stays on.
Note: _To shut down the projector, press the power button on the
_
- Follow the on-screen instructions to pair the remote control and projector, select your language, connect to your wireless network, and sign in toyour Google Account. You only need to pair the remote the first time you use it.
Install your screen
If you purchased an Epson® SilverFlex® 100-inch (ELPSC35) or 120-inch (ELPSC36) screen, see your screen documentation for installation instructions. Otherwise, see “Adjust the image.”
Adjust the image
-
To adjust the image position, move the projector while keeping it level and parallel to the
-
To adjust a tilted image when the projector is set on a flat surface, adjust the front feet so both sides are
-
Remove the focus lever cover
-
Move the focus lever up or down to adjust the image
-
Replace the focus lever
-
To correct the image shape, make sure the remote is paired with the projector and then press the corner adjustment Followthe on-screen instructions.
Note: For more detailed adjustment methods, see the online User’s Guide
Using the remote control
Note: You must first pair the remote control to the projector to use Android TV and video-on-demand features. See the online User’s Guide for more information
Troubleshooting
-
If you see a blank screen, check the following:
- Press the blank button on the remote control to see if the image was turned
- Make sure your computer or video device is properly
- Make sure the status light on the projector is blue and not
- Press the power button on the projector or remote control to wake the projector from standby or sleep mode, if
-
If you see a blank screen when a computer is connected, check the following:
-
On Windows®, hold down the Windows key and press P at the same time, then click Duplicate.
-
If you are using a Mac laptop with macOS 13, select System Settings > Displays. Press the + pop-up menu button, thenchoose a display to mirror.
If you are using a Mac laptop with macOS 12, select System Preferences > Displays > Display Settings. Select the projector, then choose the mirror option for your display from the drop-down menu.
On macOS 11 and older, open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox. -
If the projector does not respond to remote control commands, make sure the batteries in the remote control are installed Replace thebatteries if necessary.
Registration
Register today to get product updates and exclusive offers. You can register online at http://epson.com/register(U.S.), http://epson.ca/register(Canada), or http://latin.epson.com/registro(Latin America).
Where to get help
Manual
For more information about using the projector, you can view or download the online manual from the Epson website, as described below.
Internet support
Visit http://epson.com/support(U.S.), http://epson.ca/support(Canada), or http://latin.epson.com/support(Latin America) and search for your product to download software and utilities, view manuals, get FAQs and troubleshooting advice, or contact Epson.
Telephone support services
To use the Epson® PrivateLine® Support service, call
800-637-7661 (U.S. and Canada). This
service is available for the duration of your warranty period. You may also
speak with a support specialist by calling
562-276-4394 (U.S.) or
905-709-3839 (Canada).
Support hours are 7 a.m. to 4 p.m., Pacific Time, Monday through Friday. Days
and hours of support are subject to change without notice. Toll or long
distance charges may apply.
In Latin America, see the online User’s Guide for technical support
information.
Optional accessories
For a list of optional accessories, see the online User’s Guide.
You can purchase screens or other accessories from an Epson authorized
reseller in the U.S. and Canada. To find the nearest reseller, call
800-GO-EPSON (800-463-7766). Or you can
purchase online at
http://epsonstore.com(U.S. sales) or
http://epsonstore.ca(Canadian sales). To find the
nearest reseller in Latin America, go to
http://latin.epson.com.
EPSON is a registered trademark and the EPSON logo is a registered logomark of
Seiko Epson Corporation. PrivateLine and SilverFlex are registered trademarks
of Epson America, Inc.
Mac and macOS are trademarks of Apple Inc., registered in the U.S. and other
countries.
Google is a registered trademark and Android TV, Chromecast, Chromecast built-
in, and Google Assistant are trademarks of Google LLC. Google Assistant is not
available in certain languages and countries. Availability of services varies
by country and language.
Microsoft and Windows are trademarks of the Microsoft group of companies.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Seiko Epson Corporation is
under license. Other trademarks and trade names are those of their respective
owners.
General Notice: Other product names used herein are for identification
purposes only and may be trademarks of their respective owners. Epson
disclaims any and all rights in those marks.
This information is subject to change without notice.© 2023 Epson America,
Inc., 6/23
Read More About This Manual & Download PDF:
References
- Product Registration | Epson Canada
- Epson® Official Support
- Product Registration | Epson US
- Epson® Official Support
- Buy Direct from Epson | Epson Canada
- Buy Direct from Epson | Epson US
- Epson
- Epson
- Epson