VANPORE PF2F Golf Rangefinder Slope Laser Instruction Manual

VANPORE PF2F Golf Rangefinder Slope Laser

Product Overview

• Thank you for purchasing and using the handheld laser rangefinder telescope. Please read the user guide carefully before using it.
• PF2F series is a portable laser-ranging telescope with an external screen and magnetism. The body of the PF2F series is wrapped with environmentally friendly, harmless, non-slip and wear-resistant soft rubber materials; compact in appearance, non-slip and wear-resistant, light in weight, comfortable to hold, and easy to carry. With an external display, multiple people can read data at the same time to realize data sharing.
• PF2F has a built-in high-adsorption magnetic strip, which can be firmly attached to the metal parts of the golf cart, and can be taken and placed at any time, which is more convenient.
• PF2F series adopts TOF (Optical Time of Flight) technology to realize golf ballistic flagpole mode, two-point height measurement mode, automatic height measurement mode, automatic level measurement and speed measurement functions, and add flagpole lock vibration prompt and angle switch functions.
• The PF2F series has the characteristics of long-range, high measurement accuracy, fast measurement speed, intuitive distance display, and low power consumption. It is an intimate assistant for outdoor measurement activities such as golf, mountaineering, and hunting.

Warning

• Do not stare into the laser beam.

• Eyes can be permanently damaged into the sun to look into the sun with the device. Do not aim the device to the sun, it will cause permanent damage to inner to the inner components. Keep the eyepiece away from direct sunlight.
  CAUTION : LASER RADIATION, DO NOT STARE INTO BEAM, CLASS 1 LASER PRODUCT, WAVELENGTH 905nm

• Do not put the device out of the storage temperature of -10~60°C.

• Magnets may temporarily affect the normal operation of implanted electronic medical devices, such as pacemakers and implantable defibrillators.

• Magnets that are a part of this product can damage magnetic media such as floppy disks, hard drives, credit cards, cassette tapes, video tapes or other such devices. They can also damage televisions, computers, cell phones, VCRs, computer monitors and other CRT displays

Disposal

• Everyone is responsible for environmental protection.
• It’s prohibited to dispose of used batteries together with household waste, please collect used batteries to the designated refuse collection center. This product must not be recycled with household waste.
• Dispose of the product appropriately in accordance with the national regulations in your country.

Scope of Responsibility

This will not be responsible for any loss if any use of accessories from other manufacturers without approval from This.

Appearance

1. Eyepiece knob
2. Eyepiece
3. USB Charging port
4. Power/Measure button  Short press to measure,and long press  to lock the flag
5. Mode/Unit switch button Short press to switch the function Long press to switch the unit(M. Y)
6. Magnetic stripe
7. Laser Emitter lens
8. Objective Lens/Laser Receiving lens
9. External Display
10. Slope switch

After the angle is closed, the angle-related functions cannot be used.

Icons on LCD Display

Insert the icon of the display, and display the following digital signs, refer to the example picture:

ICONS on External display screen

1. Low Battery Indicator
2. yardage/unit
3. Flaglock icon
4. Measurement status icon This icon flashing means it’s measuring
5. From left to right Measuring data/ Unit M
6. From left to right: Angle indicator/Angle  data
7. Vertical height between two points Icon
8. Bull’s eye

Measure Icons Description

Initial Operation and Settings Eyepiece

Adjust the eyepiece knob to focus the target.

Power ON/OFF

1. Press the O to power ON.
2. Automatically switch off after 16s of inactivity

Functional operation specification

• Please adjust the eyepiece to focus the target before measuring.
• In the course of the measurement, if the target reflection is weak or is beyond the measuring range, it will display as”—“
• The measurement range will be affected by the materials of the target, the inclined angle of the target surface, the visibility of the weather, etc. In general, if the target surface is smooth and bright with a larger area, the beam is perpendicular to the target surface and the weather is cloudy without fog, the measurement range will be longer, and vice versa.
• Continuous measurement: It requires press and hold for 2 seconds to activate the continuous measurement. Release the button to stop the measurement.Short press Mtoswitch measuring mode as  below:

Slope On

Golf Flagpole Mode

Short press to switch to golf ballistic flagpole mode, short press 6 to perform a single measurement, long press O to enter the lock bar scan mode, align the crosshair to the measured target B point and scan left and right, Flashing means it is scanning, When O a vibration prompt is issued, that is to complete the lock rod measurement, the measured distance from point A to point B, the ballistic compensation distance, and the angle a are displayed on the screen in turn.

Auto level

Measuring horizontal distance  This mode is mainly used to measure the horizontal distance from the fuselage to the target object.
Short press W switch to Auto Level mode,  aim at the point B of the measured object, and short press the O measurement button to measure the horizontal distance from point A to point B.

Two-Point Height Measuring Mode

Short press to 1 activate vertical height measuring mode. Aim at target B, press 0) to get the distance and angle (angle  between the measured distance and  horizontal surfaces) between A and B,Move to target C, press O to get the distance and angle (angle between the measured distance and horizontal surface) between A and C, the vertical height between B and C will be displayed on the top, the absolute  value of the difference between the two angles will be displayed at the bottom.

Slope Off

Flag lock
Short press M) switch to flag lock mode, aiming at Flagpole, press and hold b, scan slowly back and forth on both sides to get the accurate distance to the flagpole. The flag is locked when device is vibrating.

Distance Measurement Mode
Short press M switch to distance measure mode.In this mode, press the power button to start getting a read of the object.

Speed Measuring Mode
Short press to activate the speed measuring mode, press aiming at target B and move slightly, the speed of the movement can be measured Speed measuring range: 18-300km/h

Charging instruction

• The device has a built-in 1000mA lithium battery, when” 4″(Low battery indicator) is displayed, please use original USB cable to charge.
• When the indicator light is red, it means that the battery is charging. When the indicator light turns green, it means charging is complete.

Specification

56~74mm

Exit pupil diameter| 3.7mm
Diopter| ±5.0 D
Laser wavelength| 905nm
Unit switch| m,   Yd
Golf Flagpole Mode|
Auto Level|
Two-Point Height Measuring Mode|
Flag lock|
Distance Measurement Mode|
---|---
Speed Measurement|
Angle measurement|
Vibration alert|
Built-in magnetic stripe|
Power| 1000mA lithium battery
Charging port| USB
Dimension   (mm)| 11374.543
Weight

(Weithout battery)

|

1. Range The maximum range shall be different according to different models. The actual range refers to the package.
2. D is for a measured distance

Notice

1. In order to protect the coating of the lens, do not touch the lens with your fingers.
2. The laser rangefinder has been precisely calibrated by instruments, please send it back to the dealer for repair instead of disassembling by yourself.
3. When the lens is contaminated, please wipe gently with a clean cloth, do not use tough objects to wipe.
4. Avoid collision or heavy load when carry or using, especially keep away from baking or corrosion.
5. Keep the product away from moisture during storage. Please keep it in a dry, cool and well-ventilated place to avoid direct sunlight, dust and temperature mutation.

Two-Year Limited Warranty

This product is warranted free from defects in material and workmanship for 2 (Two) years after date of purchase. This limited warranty does not cover normal wear and tear or damage from neglect or accident.  The original purchaser is covered by this warranty and it is not transferable. Prior to returning your tool to store location of purchase, please send us an email for possible solutions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>