Astronaut 6633 Galaxy Projector Star Projector User Manual

6633 Galaxy Projector Star Projector
User Manual

6633 Galaxy Projector Star Projector

Music Starry Projector

Here is the signal reception, please aim at this when you use the remote

Unboxing Check
Thank you for purchasing our products, please read the instruction manual carefully before use.
Instruction manual contains necessary safety advice and user instructions, follow the instruction manual to operate in order to avoid damaging the product for misuse. Check whether the product is damaged or not when you receive the product.
Package list:
Music starry projector x l
Remote controller x l
Us8 cable x1
User manual x1

Warnings:
The power requirement of this product i US8 DC 5/2A. Once the range exceeded, please use the regulator device, otherwise it’ ll affect its service life

Notice:

1. Strictly in accordance with the instructions of this operation, do not disassemble the host and accessories.
2. This product is suitable for indoor use
3. The product is projected by LED and laser combinations, please do not use lase shone directly in eyes and keep away from children

How to use:

1. Indoor use, projecting in the sly direction
2. How to use the light projector, as shown below
3. Connect Bluetooth BTK10 of the smart phone to play music
4. Use correct method of the remote control to make sure the remote control is pointing at the infrared sensor

Host button function description

1. (Automatic recognition US8 data. Note that this projector can auto recognize and play music while inserting US8 memory. US8 should contain some songs

2. Ocean wave levels brightness adjustment
   I. When Power on, LED light and laser light keep on; short press this key control
   LED light switch, long press control laser light switch

3. DC Input 5V/2A

4. Short press play previous $0g Long press reduce volume

5. Short press play next song Long press increase volume

6. Short press control music Play/Pause, Long press change US8 to Bluetooth (Connect Bluetooth and U-Disk at same time, it’ll recognize U-Disk music for priority)

7. Short press achieve Bluetooth/US8 mode switch when connect Bluetooth and US8 at same time

8. Power ON/OFF

Statement
This product has been comprehensive and rigorous tested at the factory, the user should strictly follow the warning and instructions.
Improper use resulting in product damage is not covered by the Company’s warranty
Remote control function description
Instruction;
When projector Hight connects power; LED blue Hight keeps on and in non-moved status laser light enters gradation mode it can default automatically switch off in 4 hours

1. Control LED ocean wave light ON/OFF

2. Control Laser light ON/OFF

3. Press Reed light ON; Press again, red light OFF (at basic of light on at first time)

4. Press Ggreen light ON; Press again, green light OFF (at basic of light on at first time)

5. Press “B”,blue light ON Press again, blue light OFF (at basic of light on at first time)

6. Press whiten light ON; Press again, white light OFF (at basic of light on at first time)
   (Note: Four color RGB’W buttons can be combined by two to form a double color projection)

7. Control device volume up

8. Control device volume down

9. select playing previous song

10. Select playing next song

11. Voice control: Connect with Bluetooth or US8 memory playing music, press Micro’ icon, ocean wave and star light will fast-changing following music sound

12. Control ocean wave moving speed up (Pause–Slow- Medium- Fast)

13. Control ocean wave moving speed down (Fast-Medium–Slow–Pause)

14. Long press 3seconds to cancel timing function. When LED, laser light flash and emit “bleep Sound three times as prompting

15. Press FADE 1,ocean wave move circularly in R-GB-W single color mode
    and laser light changed to gradation mode (the same feature as power Or)

16. Press “FADE 2”,ocean wave mowed circularly in R8-RG-RW8G8W-GW
    double-color mode and laser Hight changed to gradation mode

17. Long press 3s control timing function for 1 hour, When LED, laser light flash and emit “bleep sound once time as prompting. 1 hour later, it’ ll automatically switch off

18. Control LED ocean wave light brightness (in order of 70% 409% -409% 70% 1009%

19. Press “LASER light” achieve either Laser light stay on or enter into gradation mode

20. Long press 3s control timing function for 2 hours. When LED, laser light flash and emit bleep” sound 2 times as prompting. 2 hours later, it’ ll automatically switch off

21. Control Music Switch On/Off

Notice;
This product cores with 4 hours automatic shutdown function that is work for 4 hours and shut down automatically

Specification

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>