JOY-iT RB-AlucaseP4+07FAN ARMOR Case Bock Active Instructions
- June 4, 2024
- JOY-It
Table of Contents
RB-AlucaseP4+07FAN ARMOR Case Bock Active
Instruction Manual
GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you which
things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to contact us.
ASSEMBLY
-
Stick the heat-conducting pad on the Raspberry Pi 4 as shown in the following picture.
-
Now, screw tight the cooling fans with the screws with the narrow head with the help of the Allen key included in the scope of delivery.
-
Put the top of the case onto the Raspberry Pi 4.
-
Now, turn the Raspberry Pi 4 with the top around, put the bottom part onto it, and screw the case tight at the bottom with the screws with the thicker head.
-
Connect the cooling fans with the Raspberry Pi 4. Please note, that the red cable must be connected with pin 4 (5V) and the black cable with pin 6 (GND).
-
The case is now completely mounted.
OTHER INFORMATION
Our Information and Take-back Obligations according to the German Electronic
Law (ElektroG)
The symbol on Electrical and Electronic Products:
This crossed-out bin means that electrical and electronic products do not
belong in household waste. You must hand over your old appliance to a
registration place. Before you can hand over the old appliance, you must
remove used batteries and replace batteries that are not enclosed by the
device.
Return Options:
As the end user, you can hand over your old appliance (which has essentially
the same functions as the new one bought with us) free of charge for disposal
with the purchase of a new device.
Small devices, which do not have outer dimensions bigger than 25 cm can be
handed in for disposal independently of the purchase of a new product in
normal household quantities.
- Possibility of return at our company location during our opening hours Simac Electronics Handel GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn
- Possibility of return nearby We will send you a parcel stamp with which you can send us your old appliance free of charge. For this possibility, please contact us via e-mail at service@joy-it.net or via telephone.
Information about Package:
Please package your old appliance safely for transport. Should you not have
suitable packaging material or you do not want to use your own material, you
can contact us and we will send you an appropriate package.
SUPPORT
If any questions remained open or problems may arise after your purchase, we
are available by e-mail, telephone, and ticket support system to answer these.
E-Mail: service@joy-it.net
Ticket-system: http://support.joy-it.net
Telephone: +49 (0)2845 98469 – 66 (10 – 17 o’clock)
For further information visit our website: www.joy-it.net
www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
www.joy-it.net
SIMAC Electronics GmbH
Pascalstr. 8, 47506 Neukirchen-Vluyn
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>