Fermob APLÔ Lampe h24 MAX Indoor and Outdoor Lamp Instruction Manual
- June 14, 2024
- Fermob
Table of Contents
Fermob APLÔ Lampe h24 MAX Indoor and Outdoor Lamp Instruction Manual
FOREWORD
- Remove the product carefully from its packaging. Check that the product is not damagedand that it works correctly
OPERATING INSTRUCTIONS
-
Switch
- Short touch = ON-OFF with brightness and colour temperature memory function
- When ON: long touch (4 sec.) = change brightness
- : ON 100% > touch 4 sec. > 10 %
- : ON 10% > touch 4 sec. > 100 %
- Double touch = change colour temperature
- WARM WHITE 2700 ° Kelvin
- COLD WHITE 4000 ° Kelvin
-
-
This lamp is equipped with Bluetooth technology. Additional features: adjustable colour temperature, lighting groups, etc
-
Using Bluetooth, APLÔ h24 MAX’ extends its colour temperature
WARM WHITE COLD WHITE
2200 ° Kelvin 6000 ° Kelvin -
APLÔ h24 MAX’ is compatible with the Ludo connected switch.
-
Download our Fermob Lighting app and let us guide you!
BLUETOOTH RESET FUNCTION: in order to pair with a new smartphone, or in case of problems with the connection, you have to press for 10 seconds until the lamp begins flashing to indicate the resetting -
For answers to frequently asked questions, see the FAQ section in the app and at fermob.com.
-
APLÔ h24 MAX’ flashes to warn that the battery has almost run down (7-hour battery life at 100%).
-
When the battery is exhausted, APLÔ h24 MAX’ flashes when the button is pressed
-
BY PASS: APLÔ h24 MAX’ can be used with a cable without damaging the battery
-
CHARGING
Only use the “Fermob magnet” charging system.
- APLÔ h24 MAX’ must be switched off to recharge.
- An indicator lights up during the charging time and turns off when the battery is 100% charged.
- Power supply: USB-A DC 5V 2A (charger not provided)
MAINTENANCE
-
Use soapy water or Fermob multi-purpose cleaner
-
Spray or apply with a soft sponge. Rinse with water.
-
Wipe clean.
PRECAUTIONS
Follow these tips to get the best out of your APLÔ h24 MAX’ lamp:
- Charge in a place sheltered from bad weather
- Ensure that you charge your lamp regularly to protect the battery.
- Be careful not to store your lamp when its battery is fully discharged.
TECHNICAL INFORMATION
OUTDOOR PROTECTION: IP 54
RESISTANT TO BUMPS AND UV RAYS
USB CHARGING
LIGHT TEMP. SELECTION WARM COLD
- Power consumption: 3W
- Operating temperature : -20 to +60°C
- Battery usage cycles : ≥ 300
- Recommended operating temperature: 0 to 40°C
QUALITY & ENVIRONMENT
RECYCLING
Fermob lamps are designed using environmentally-friendly materials and
processes: LED, environmentally-friendly paints, high-performance and durable
electronic & electrical components, metal, recycled packaging, etc. The
products can be dismantled to facilitate end-of-life recycling.
ECO-DESIGN & DURABILITY
Fermob’s quality expertise is integrated in all projects, from the initial
conceptual phase \to the design and manufacturing phases. Following marketing,
our continuous improvement process allows us to extend the lifespan of our
products.
GUARANTEE & AFTER-SALES SERVICE
- The guarantee is ensured according to applicable European legal conditions, i.e. 2 years for individual consumers and 1 year for professionals.
- If the product is damaged, or for any questions pertaining to its use, please contact Fermob’s customer service or your retailer.
- Do not carry out any repairs other than those authorised by the brand as the guarantee will be void.
- All guarantee conditions & limitations can be consulted on the guarantee charter, available at fermob.com
- This lamp is eco-designed: many spare parts are available on our website Fermob.com & Fermobcontract.com
REGULATORY COMPLIANCE
The light source can be replaced at the end of its life. Request assistance from a qualified person.
In accordance with WEEE Directive 2002/96/EC, you must return this product to a collection point for recycling at the end of its service life If you require any further information, please contact Fermob.
Fermob declares that this product conforms to the following European directives : Low Voltage Directive (2014/35/EU), RoHS Directive (2011/65/EU), Electromagnetic Compatibility Directive (2014/30/EU) and Battery Directive (2006/66/EC).
This product contains an energy efficiency-rated light source F.
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>