ManualsPro walimexpro walimexpro Niova 600/900 Plus Daylight/Bi Color LED Light Panel Instruction Manual

walimexpro Niova 600/900 Plus Daylight/Bi Color LED Light Panel Instruction Manual

June 8, 2024
walimexpro

walimexpro Niova 600/900 Plus Daylight/Bi Color LED Light Panel

walimexpro-Niova-600-900-Plus-Daylight-Bi-Color-LED-Light-Panel- product

Introduction

This lamp from the Walimex pro Niova 600/900 Plus LED Light Panel series is a powerful, mo-dern and fully equipped LED light panel. These continuous lights offer you the highest light quality and an enormous illuminance even on medium to long distances. This light series is available as Daylight or Bi Color version and offers the latest state-of-the-art features, top-quality workmanship and product quality.

  • LED Light Panel for photo and video projects of all kinds, ideal for portrait and product photography, YouTube recordings etc.
  • Fully featured LED light with passively cooled aluminum housing, illuminated display, remote control, and DMX control sockets
  • 36 or 54 W power for up to 4,350 lumens (model 600) or 6,500 lumens (model 900), bright-ness dimmable from 10 – 100%
  • Available as Daylight version with 5,600 Kelvin or Bi-Color version with variable color temperature from 3,200 to 5,600 Kelvin
  • Very strong illuminance of up to 5,920 lux/1 m (model 600) and 8.780 Lux/1 m (model 900), 45° beam angle, CRI of 97 Ra, flicker-free
  • Powered by mains power with an AC adapter or 2x Sony NP-F compatible batteries, all the functions remote-controlled, 99 channels adjustable
    We hope you enjoy using our product. Your team from WALSER!

Warning:

  • Please read these user instructions thoroughly before you use this new equipment for the first time. It contains everything you need to know in order to avoid damage to persons or property.
  • Strictly follow all notes on safety in these user instructions.
  • Keep these user instructions in a safe place. If you sell your equipment or pass it on to someone else, you should also pass on these user instructions.

Understanding these user instructions correctly

Markings on the device

This symbol indicates that your device meets the safety requirements of all applicable EU directives.
Waste disposal and protection of the environment
Electric and electronic appliances as well as batteries must not be disposed of together with domestic waste. The user is legally obli-ged to return electric and electronic appliances as well as batteries to specially set up public collecting points or to the sales outlet once the appliance has reached the end of its service life. Details are regulated by national law. The symbol on the product, in the user instructions or on the packaging refers to these provisions. Recycling, material-sensitive recycling, or any other form of recycling of waste equipment/batteries is an important contribution to the protection of our environment.

Identifications in these user instructions

Draws your attention to the dealing with and the effect of safety information.
WARNING: Draws your attention to a dangerous situation which can result in severe or even fatal injury if not avoided.
NOTICE: Draws your attention to possible property or equipment damage and other important information in connection with your equipment.
CAUTION: Indicates a hazardous situation which, if not avoided, may result in minor or moderate injury.

Important safety information

WARNING

The danger of blinding and eye damage
The optical radiation of the LED lamp can blind the eyes and cause after- vision, if humans or animals look directly into the light. This can lead to accidents and eye damage.
Make sure that humans or animals do not look directly into the illuminant and keep a safe distance of at least 5 m, if necessary use diffusors between lamp and model or object. Do not use the lamp for illumination purposes when shooting small children or babies.

WARNING

Danger of crashing, entrapment, burning and fire through the tumbling of the device

The weight of the lamp is, depending on the model, up to 3500 g.

  • Make sure that the device is always positioned tilt and skid resistant and stored securely.
  • Make sure that all fastening screws have been properly tightened.
  • Keep out of reach of children and animals. They could topple the device.
  • Avoid placing cables where they can be tripped over. The device could be toppled.

WARNING

Danger of electric shock, burn hazard
Please note that the device is still connected with the supply voltage even if it is switched off. Only after disconnecting the device from the power supply by unplugging the power cable, the device is actually de-energized.

  • Switch off your device when it is not in use.
  • Switch off your device before mounting and maintenance, and disconnect it from the power supply.
  • Protect your device against unintended switching-on.
  • Disconnect the device from the mains if you‘re not using it.

WARNING

Danger of electric shock, fire through short-circuit
A short-circuit could be caused by broken cables and through humidity or moisture. A short-circuit can warm up the conductors, so that their insulation or even they themselves may melt. This could lead to fire.

  • Please just use the original cables, which are included in delivery. They are designed for your device and guarantee the necessary safety for you and your device.
  • Don´t operate the device with wet hands or feet.
  • Operate the device only in dry rooms.
  • Don´t operate the device outdoors.
  • Please only follow this instruction manual for cleaning your device.
  • Make sure that cables and conductors won´t be damaged. Damages could be caused through heat impact, chemical influence or through mechanical impacts as rubbing, ben-ding, tearing, toppling or nibbling animals.
  • Prevent your device for toppling. In case of toppling, please let an electrician check the device before switching on again.
  • If your device should be damaged or broken or if you notice a burning smell: Disconnect the power supply by pulling out the power cord. Never operate your device with damaged housing, damaged reflector, broken modeling lamp, broken flash tube or damaged power cord. Don´t open the device. Never repair the device on your own. The device should only be repaired by electricians.
  • Please follow this instruction manual for maintaining your device.
  • Please just use spare parts which conform to the required specifications.
  • Illuminants must only be replaced by a skilled electrician.

WARNING

Fire danger through overheating
The device can overheat if you operate it with covered ventilation slots. The device itself or easily inflammable materials in close distance could catch fire.

  • Don´t cover the ventilation slots of the device during operation.
  • Remove easily inflammable materials.
  • Please just use spare parts, which conform to the required specifications.

WARNING
The danger of burning on hot parts

  • The illuminant may reach temperatures of up to 40 °C.
  • Don´t touch the parts during operation and cooling down.
  • Please let the device cool down before you unmount it or start maintenance work.

WARNING
Danger of cutting and splintering caused by bursting illuminant
Illuminants can break or splinter. Splinters can cause eye and skin injuries.

  • Handle illuminants with care, to avoid breakage.
  • Make sure you do not touch the illuminant by accident when mounting or replacing accesso-ries.

WARNING
The danger of suffocation caused by small parts
Keep the device out of the reach of children and pets.

WARNING
 Precautions when using with rechargeable battery
These can run out or explode if inappropriately handled. Please observe the following safety notes when handling the rechargeable battery for use with this unit:

  • Use only rechargeable batteries mentioned in these operating instructions.
  • Do not lay the rechargeable battery into fire or expose these to direct heat.
  • To prevent the product from being damaged make sure you have removed the rechargeable battery if you will not use the product over a longer period of time or if the rechargeable battery has been discharged.
  • If battery fluid has come into contact with skin or clothes, flush it off immediately with fresh water.
  • Do not recharge the rechargeable battery unattended.
  • Once the recharging process is finished, disconnect the charger from the power supply.

Unpacking and checking the device

  1. Carefully unpack the package content.
  2. Check whether the scope of delivery is complete.
  3. Please find full scope of delivery for your device on Page 47.
  4. Check whether the scope of delivery is free of damage.

NOTICE

If the scope of delivery is incomplete or damaged, please contact info@walser.de.

In the interest of product improvements, we reserve the right to make technical and visual ch-anges. Illustrations may differ slightly. Not subject to identification or labelling as per Directive 2010/30/EU. Not suitable for illumination purposes in households. Specially developed for photo and video shooting requirements.

Overview of components and control elements

walimexpro-Niova-600-900 -Plus-Daylight-Bi-Color-LED-Light-Panel-fig-4

LED light

  1. Luminous surface

  2. LED bulbs

  3. Guide rail for diffusor

  4. Guide rail for barn doors

  5. Locking mechanism for diffusor and barn doors

  6. Tilt angle adjustment screws

  7. U-bracket holder

  8. Stand holder adapter hole (5/8 inch spigot)

  9. Mounting screw lamp holder

  10. Metal housing

  11. Vents

  12. Tilt angle mechanism of the LED light holder

  13. Unlocking mechanism diffusor and barn doors

  14. Battery slots (Sony NP-F compatible)

  15. DMX Socket Input (RJ45)

  16. DMX Socket Output (RJ45)

  17. Blanking plug internal antenna

  18. Selection knob channel/dimming function

  19. Selection knob DMX/Remote control <2.4G/DMX>

  20. Selection knob battery power status

  21. Display

  22. Status LED dimming function

  23. Status LED DMX/Remote control

  24. Status LED color temperature

  25. Control wheel with rotation/push function with plus/minus adjustment

  26. ON/OFF switch with power source selection (I=BATTERY, O=OFF, II=MAINS POWER/ADAPTER)

  27. Power adapter connection socket
    Accessories:walimexpro-Niova-600-900-Plus-Daylight-Bi-Color-LED-Light- Panel-fig-5

  28. Remote control

  29. Power adapter with round power plug cable

  30. Euro plug power supply cable

  31. Diffusor orange (only Daylight version)

  32. Diffusor white

  33. Ultra soft diffusor (only Bi-Color version)

  34. Barn doors with mounting frame

  35. DMX control cable (3 Pin to RJ45)

  36. Carrying bag

Quick reference guide

NOTICE

Detailed instructions for the following activities can be found in the relevant sections of these instructions for use. Strictly follow the sequence of the following activities during first time use, to prevent damage to the device.

WARNING
For all activities, follow the safety instructions in the relevant sections.

  • Preparing the device for use / installation on a stand
  • Power supply
  • Operating the device, switching on / off, settings and display signals
  • Troubleshooting

WARNING
 With any action you take you should pay attention to the safety notes in the corresponding paragraphs.

Preparing the device for use

Mounting on a lamp stand / ceiling mount

  • Check the tightening of the locking screws for the tilt angle setting of the mount (6) and tighten them if necessary.
  • Loosen the locking screw of the lamp holder (9) until the mount can be inserted onto the attachment adapter of a suitable lamp stand / ceiling mount.
  • Attach the yoke holder of the lamp (7) to the attachment adapter of a suitable lamp stand /ceiling mount. Usually a 5/8-inch (16-mm spigot) attachment adapter is integrated into the lamp stand / ceiling mount.
  • Tighten the mounting screw of the lamp holder (9) again.
  • Check once more that the lamp holder and all attachments are securely in place.
  • As an additional security measure, especially when fastening on a ceiling mount, we recom-mend using additional stainless-steel safety cables.
  • Set the desired tilt angle.
  • The LED light is now mounted and ready for use.walimexpro-Niova-600-900-Plus-Daylight-Bi-Color-LED-Light-Panel-fig-6

Mounting the diffusor and barn doors

Mounting the diffusor and especially barn doors is easier if the lamp is removed from the lamp stand and the lamp, including the mount with the LED bulbs, is placed upwards on a table.

  • Slide the unlocking mechanism for the diffusor and barn doors (13) on the backside of the lamp outwards, and at the same time, press the locking mechanism for the diffusor and barn doors (5) towards the lamp (downwards).
  • The diffusor and / or the barn doors with the mount/holding frame can now be inserted into the device.
  • If necessary, slide the diffusor into the LOWER guide rail.
  • If necessary, slide the frame of the barn doors into the UPPER guide rail.
  • Place both in the centre (when doing so, mind the notches in the diffusor) and ensure that the flaps are not inserted at an angle.
  • Pull the locking mechanism for the diffusor and barn doors (5) with your fingers out of the de-vice (upwards). Ensure that the locks have been pulled out completely out of the device until they hit the stopper.
  • Then check that the diffusor and / or barn doors are firmly in place.
  • The LED light is ready for use and can be mounted again on a stand.
  • To disassemble the diffusor and the flaps, do the same in reverse order.walimexpro-Niova-600-900-Plus-Daylight-Bi-Color-LED-Light-Panel-fig-7

NOTE : When closing the 4 light flaps, first of all close the smaller light flaps on the side and then the long flaps at the top and bottom.
NOTE: Please follow the user information issued by the stand manufacturer.
WARNING: Only mount the device on a stand that has been designed for the weight and dimensions of the device. See section 15
Make sure that the stand with the mounted device is safe against tipping over or slipping.

General information to the LED beam angle, the use of diffusor and barn doors, day-light versus bi-colour light panel version
With the Niova 600 / 900 Plus model series, the arrangement and the selection of built in LED bulbs provides a light beam angle of approx. 45°. This is a very good compromise which creates light that is not too hard for use, even at short distances (e.g. in studios and when using a lamp stand). Otherwise, the beam angle of 45° (without diffusor) ensures that the set cone of light provides a good light power level (Lux) even at medium and larger distances.

Information to the light characteristics of LED panels, depending to the LED beam angle:

  • 30-35° beam angle: Very hard, strongly focused light for use at large distances.
  • 40-45° beam angle: Modern and up to date, good compromise for use in the studio at short distances (when using a diffusor) and for medium to large distances (without a diffusor), de-pending on the maximum device output power.
  • 55-60° beam angle: Commonly used, good compromise for use in the studio and at short to medium distances; at longer distances, powerful devices are required.
  • 120° beam angle: Very soft, even and very dispersed light for illumination at a short distance; at greater distances, very powerful devices are required.

The LED lights of the Walimex pro Niova 600 / 900 Plus series feature removable diffu-sors and barn doors. With daylight models (colour temperature of 5,600 Kelvin), a white and an orange diffusor, and with Bi Color models two white (soft and ultrasoft) diffusors come with the scope of delivery. The light characteristics can be changed using a diffusor. A diffu-sor provides even, soft light characteristics. By using the orange diffusor, you can change the colour temperature towards a more red coloured, warmer tone. With bi- colour models, the orange diffusor is not needed and not included, because the variable colour temperature is generated by the use of two different LED bulbs (white light and tungsten LEDs), stepwi-se between 3,200 and 5,600 Kelvin. The use of barn doors / light flaps provides ext-ra control over the cone of light and additionally offers versatile edge setting possibilities.

Bi Color versus Daylight models:
The LED panels of the Walimex pro Niova 600 / 900 Plus series comes in daylight and bi-colour versions. Please find below a description of the features of each of the models.

Daylight Version:
A daylight LED light panel is a specialist for providing a lot of bright light with a daylight colour temperature of 5,600 Kelvin. At this model, only daylight / white light LED bulbs are installed in the device. The colour temperature can be affected by using an orange diffusor.

Bi Color Version:
The bi-colour models are the very modern, versatile variations of LED light panels. They have built in half daylight / white light LED bulbs and half orange / tungsten coloured LEDs bulbs. This allows the user to adjust the colour temperature between 3,200 and 5,600 Kelvin. At 3,200 Kelvin, only the tungsten-coloured LED bulbs are activated, at 5,600 Kelvin only the white LED bulbs are powered on. This ensures a high variability, but results especially at 3,200 and 5,600 Kelvin, in a lower maximum illumination intensity, compared to the Daylight version with the same power. Mixed light with a colour temperature of 3,300 to 5,500 Kelvin is created by mixing the strengths of each kind of LED bulbs. The maximum light output is achieved at the Bi Colour version at 4,300-4,400 Kelvin if both LED bulb types works at the maximum power. The vari-able colour temperature allows good handling of often existing mixed light. You can also give different emphasis to your photo and video results by using warmer or colder light.

Power supply

Batter power supply – installing the battery

  • Switch the device off – – with the ON/OFF switch (26) on the device.
  • Place a sufficiently charged and compatible battery (Sony NP-F compatible; see detailed instructions on page 47) on the backside of the LED light into the battery compartment (14).
  • Usually, a short clicking sound from the battery safety lock indicates that the battery has been correctly inserted.
  • Check that the battery is securely in place.
  • Put batteries into both battery compartments in accordance with the above instructions. The device will not operate with just one battery.
  • Set the power source switch (26) to .
  • The device is now ready for battery operation.
  • To remove the battery, push it in the opposite direction and take it out.
  • Switch the lamp off after use.

Battery charge status control

  • Insert 2 batteries into the lamp as described in section 7.1.
  • Set the power source switch (26) to .
  • Press the button on the battery charging indicator button (20).
  • On the device display, the battery charge status will be shown in values of LO (Low), 25%, 50%, 75% or 99%.

NOTE: If the device is operated by the mains power (switch position

), the display will always show a full battery status 99%. The battery status check will only work correctly if the mains power cable is removed. Batteries are not charged on the lamp if the lamp is connected to the mains.

NOTE: Note that all Walimex pro Niova 600 / 900 Plus series devices must generally be equipped with two sufficiently and similarly charged batteries. The device will not operate with just one battery.

CAUTION

  • Do not short circuit.
  • Do not expose to rain or immerse in water. This battery is not water proof.
  • Keep out of reach of children.
  • Do not continuously charge a battery for more then 24 hours.
  • Store in dry, cool, ventilated place.
  • Do not place into fire or expose to extreme heat.
  • Dead batteries should be disposed of according to local regulations.
  • If the battery has not been used for over 3 months, please recharge them before use.
  • Do not use the LED light while charging the battery.

WARNING

Precautions when using with rechargeable battery
These can run out or explode, if inappropriately handled. Please observe the following safety notes when handling the rechargeable battery for use with this unit:

  • Use only rechargeable batteries mentioned in these operating instructions.
  • Do not lay the rechargeable battery into fire or expose these to direct heat.
  • To prevent the product from being damaged make sure you have removed the rechargeable battery if you will not use the product over a longer period of time or if the rechargeable battery has been discharged.
  • If battery fluid has come into contact with skin or clothes, flush it off immediately with fresh water.
  • Do not recharge the rechargeable battery unattended. Separate charger required. Charging batteries in the lamp is not possible.
  • Once the reacharging process is finished, disconnect the charger from the power supply.

Recommendations for using your battery

  • Change the battery at the latest when the light starts to flicker
  • Switch the device off before removing the battery.
  • This also applies for changing or adding another battery in models with several battery mounts. Switch the light off before adding or changing the battery, and do not insert other batteries into the mount while the light is being used.
  • Do not let the battery charge level go too low, and charge up your battery as soon as pos-sible. This ensures the longer battery life.
  • Please remove the battery from the battery mount while transporting or storing the device. This is to prevent damage to the battery mounts during transportation and prevents the battery becoming uncharged unintentionally.
  • To maintain the performance of your battery, we recommend letting the battery run empty completely and then recharging it around once a month.
  • Please remove the battery from its mount after using your device.

NOTE

Only use batteries intended for the device – see section 15. After use, remove the batteries from the battery compartment.

Mains power supply – connection to the mains

  • Switch the device with the ON/OFF switch (26) on the device.

  • Insert the round plug of the power supply unit provided into the socket marked <DC 13 – 19 V> (27) on the backside of the lamp.

  • Connect the power cable with the power supply unit.

  • Connect the power supply unit to the plug of the local power
    (AC 100 – 220 – 240 V / 50 – 60 Hz).

  • Set the power source switch (26) to .

  • The device is now ready for mains operation.

  • Switch the lamp off after use.

NOTE

  • Compare the local electric power supply with the connection values of the device. Should the connection values not match, please contact info@walser.de
  • Only connect the power supply unit to a grounded plug.
  • After use, disconnect the device from the local power supply by simply pulling out the mains plug.

Operating and using the device

Switching the device on / off

  • Set the correct power source, as described in section 7 above, and switch on the device.
  •  The lamp is ready for use.walimexpro-Niova-600-900-Plus-Daylight-Bi-Color-LED-Light-Panel-fig-8

Setting brightness (dimmer function) on the device

  • Switch the device on with the ON/OFF switch (26) and select the correct power source (if not already done).
  • As standard, the lamp is pre-set to dimmer function after switching on, and the corresponding status LED (22) lights up blue.
  • The selected light output is shown as a percentage in the first two digits of the display.
  • By pressing the multi-function button / selection dial (25) repeatedly, you can switch between adjusting brightness (dimmer function) and colour temperature.
  • Select the function for adjusting brightness (status of LED (22) lights up).
  • Turn the multi-function button / selection dial (25) to set the desired brightness.
  • The brightness can be adjusted in steps of 1% from 10 to 99%.
  • The brightness value is adjusted, saved and shown on the display immediately after turning the selection dial.

Adjusting the colour temperature on the device (for bi-colour models only)

  • Switch the device on with the ON/OFF switch (26) and select the correct power source (if not already done).
  • The current set colour temperature is shown in a shortened fashion in the third and fourth digit in the display of the lamp (21). For example, 32 means 3,200 Kelvin and 44 means 4,400 Kelvin.
  • By pressing the multi-function button / selection dial (25) repeatedly, you can switch between adjusting brightness (dimmer function) and colour temperature.
  • Select the function for adjusting the colour temperature (status of LED (24) lights up).
  • Turn the multi-function button / selection dial (25) to set the desired colour temperature.
  • The colour temperature can be set in steps of 100 Kelvin from 3,200 to 5,600 Kelvin.
  • The colour temperature value is adjusted, saved and shown on the display immediately after turning the selection dial.

Setting the remote-control channel on the device

  • Switch the device on with the ON/OFF switch (26) and select the correct power source (if not already done).
  • As standard, the lamp is pre-set to dimmer function after switching on, and the corresponding status LED (22) lights up blue.
  • Press the button marked (18) below the status light. The selection switches from dimmer function / brightness adjustment to channel selection.
  • If you select the channel function, NO separate status LED will light up.
  • The set channel is shown on the display (three digits in the display).
  • Turn the multi-function button / selection dial (25) to set the desired channel.
  • Channels from 1 to 99 can be selected.
  • Press the multi-function button /selection dial (25) to confirm the selection.
  • The value set for the channel selection is set and saved.
  • The display then changes automatically back to the standard display for brightness and colour temperature.

DMX channel selection on the device, controlling the DMX unit
The lamps of the Walimex pro Niova 600 / 900 Plus series can be controlled remotely with a DMX 512 device. You will need a separate DMX control unit to do this. This is not included and must be purchased separately.

DMX control cable connection – controlling one lamp
Connecting to a lamp and controlling it using the DMX control panel / remote control

  • Insert the 3-PIN DMX control cable supplied (or a compatible DMX cable) into the 3-PIN out-put connector of a suitable DMX remote control (not included).
  • Insert the other end of the connector cable (with RJ45 plug) into the DMX input socket (15) of the lamp marked .
  • Press the <2.4G/DMX> button (19) to switch between control via DMX and remote control (or device panel elements)
  • If the status LED <2.4G/DMX> is ON, the DMX control is activated.
  • If the status LED <2.4G/DMX> is OFF, the remote control or the device control elements are activated.
  • The selected DMX channel is displayed when using a connected DMX control unit on the device display. If no DMX equipment is connected, the status display will show “OF”.
  • Turn the multifunction button / selection dial (25) to set the desired DMX channel and confirm by pressing the multi-function button / selection dial (25) once.
  • You can set channels from 1 to 512.

DMX control cable connection – controlling several lamps

  • Connect the DMX control console, as described in point 8.5.1 to the lamp
  • Insert a compatible RJ45-DMX control cable into the DMX output socket (16) on the device marked (this cable is not included).
  • Insert the other end of the cable into the DMX output socket (15) of the second Walimex Pro Niova 600 / 900 Plus lamp marked .
  • Set the correct DMX control channel on the second lamp
  • Both connected LED lamps are now controlled via the DMX signal of the DMX remote control.
  • Proceed in the same way to control other lamps.

NOTE

  • For more details on DMX address setting, please refer to the instructions of the DMX control unit.
  • Devices of the Walimex pro Niova 600 / 900 Plus series are fitted with RJ-45-DMX connec-tors. As standard, a 3-PIN XLR to RJ-45 cable is provided. If your DMX control unit has a 5-PIN DMX connection system, it is necessary to use the corresponding DMX adapters /adapter cables. These adapters / cables can be obtained at any well-stocked dealers.

Function buttons / displays on the remote control / menu description of the remote controlwalimexpro-Niova-600-900-Plus-Daylight-Bi-Color-LED-Light- Panel-fig-9

Overview functions remote control display:

  • Red status LED – Setting brightness by remote control
  • Orange status LED – Setting color temperature by remote control (only Bi Color version)
  • No status LED – Setting channel by remote control
  • Green status LED – Illuminates when the minus <-> or plus <+> button is being pressed Hint:
    The individual modes of the menu are shown in short version on the backside of the remote control.

Selecting the channel on the remote control / synchronizing the lamp and remote control

  • Before first using the device, insert sufficiently charged compatible batteries or rechargeable batteries (2x AAA 1.5V) into the remote control.
  • Switch the device on using the ON/OFF switch (26) and select the desired power source (if not already done). The <ON/OFF> function on the remote control will not work if the mains power switch on the lamp is switched off.
  • Press the ON/OFF switch on the remote control once briefly to activate the display.
  • Check the current settings in the device and remote-control display. The channel selected on the remote control must be the same as the channel set on the device.
  • If the channels are incorrectly set, press the button on the remote control, you can cycle through between setting the brightness, colour temperature, and channel menu.
  • Select channel setting.
  • The currently set channel is displayed and the channel selection is activated if NO status LED is shining on the remote control display.
  • Set the desired channel by pressing the plus <+> or minus <-> buttons on the remote control..
  • Press the