METCAL BVX-250 Series Fume Extraction System User Guide
- June 14, 2024
- METCAL
Table of Contents
METCAL BVX-250 Series Fume Extraction System
Product information
Specifications
The BVX-250 Series Fume Extraction System is a two-station fume extraction
system designed to effectively remove harmful fumes and particles from the
air. It is suitable for use in various industries, including electronics
manufacturing, soldering, and chemical laboratories.
Main Features
- Two-station fume extraction system
- Efficient removal of harmful fumes and particles
- Suitable for electronics manufacturing, soldering, and chemical laboratories
Technical Specifications
| Model | BVX-250 |
|---|---|
| Filtration Efficiency | 99.97% |
| Airflow Capacity | 250 CFM |
| Noise Level | Less than 60 dB |
| Power Consumption | 120V, 60Hz, 2.5A |
| Dimensions | 12.5″ x 15.5″ x 8.5″ |
Product Usage Instructions
Setup and Installation
- Unpack the BVX-250 Series Fume Extraction System and ensure all components are included.
- Place the system on a stable and flat surface near the workstations where fume extraction is required.
- Connect the power cord to a suitable power outlet.
- Ensure that the filters are properly installed and secured in the system.
- Connect the extraction hoses to the system and position them near the source of fumes.
Operation
Before operating the BVX-250 Series Fume Extraction System, make sure to
read and understand the safety precautions provided in the user manual.
- Press the power button on the system to turn it on.
- Adjust the fan speed using the control knob to match the level of fume extraction required.
- Monitor the filter status indicator to ensure that the filters are clean and functioning properly.
- If the filter status indicator shows a need for replacement, follow the instructions in the user manual to replace the filters.
- When finished using the system, press the power button to turn it off.
Maintenance
To ensure optimal performance and longevity of the BVX-250 Series Fume
Extraction System, regular maintenance is recommended.
- Clean or replace the filters as instructed in the user manual or when indicated by the filter status indicator.
- Periodically inspect and clean the extraction hoses and nozzles to remove any accumulated debris or obstructions.
- Check all connections and ensure they are secure.
- Keep the exterior of the system clean by wiping it with a damp cloth. Do not use harsh chemicals or solvents.
Troubleshooting
If you encounter any issues with the BVX-250 Series Fume Extraction System,
refer to the troubleshooting section in the user manual or contact our
customer support for assistance.
FAQ (Frequently Asked Questions)
-
Q: Can the BVX-250 Series Fume Extraction System be used for welding applications?
A: Yes, the BVX-250 Series Fume Extraction System is suitable for welding applications and can effectively extract welding fumes from the air. -
Q: How often should I replace the filters?
A: The frequency of filter replacement depends on the usage and the level of contaminants in the air. It is recommended to monitor the filter status indicator and replace the filters when indicated or as instructed in the user manual. -
Q: Is the BVX-250 Series Fume Extraction System portable?
A: Yes, the BVX-250 Series Fume Extraction System is compact and lightweight, making it easy to move and transport between different workstations.
INSTALLATION
Filter Replacement
References
- bit.ly/Metcal-BVX-250-Quick-Start-Guide
- Sign in to your account
- Sign in to your account
- Sign in to your account
- Metcal - Advanced Manufacturing Solutions
- Contact Us - Metcal