METCAL UFT-6CH9006S UFT Ultra-Fine Tweezer Cartridges User Manual

METCAL UFT-6CH9006S UFT Ultra-Fine Tweezer Cartridges

UFT Ultra-Fine Tweezer Cartridges

UFT Ultra-Fine Tweezer Cartridges are compatible with CV-5200, CV-500 Systems and CV-H4-UFT Ultra-Fine Tweezer Hand piece.

Please note the above temperatures are the maximum temperatures of the heater. The idle temperature is dependent on the geometry of the cartridge
(up to 15 ˚C lower).

These tips will provide data via the CV power supplies, but due to the nature of their application the Connection Validation function is not required and therefore not enabled. – All tweezer cartridges are sold per pair!

Ultra-Fine Tweezer Cartridge – Chisel

Ultra-Fine Tweezer Cartridge – Chisel

| UFT- 6 CH9006S
UFT- 7 CH9006S| (W x L) 0.6 x 9 mm (.0.024″ x .0.35″),
Sold per pair
| UFT- 6 CH9008S
UFT- 7 CH9008S| (W x L) 0.8 x 9 mm (.0.031″ x .0.35″),
Sold per pair

Ultra-Fine Tweezer Cartridge – Conical

Ultra-Fine Tweezer Cartridge – Conical

| UFT- 6 CN5502R
UFT- 7 CN5502R| Conical, Bent, for work under a microscope,
(Ø x L) 0.2 x 5.6 mm (0.008″ x 0.220″)
Sold per pair
| UFT- 6 CN5504R
UFT- 7 CN5504R| Conical, Bent, for work under a microscope,
(Ø x L) 0.4 x 5.6 mm (0.16″ x 0.220″),
Sold per pair
| UFT- 6 CN8004S
UFT- 7 CN8004S| Conical,
(Ø x L) 0.4 x 8.7mm (0.16″ x 0.343″),
Sold per pair

Ultra-Fine Tweezer Cartridge – Power Wedge

Ultra-Fine Tweezer Cartridge – Power Wedge

| UFT- 6 PW3150S
UFT- 7 PW3150S| Power Wedge, two-way use, tip and long side,
(Ø x L) 0.31 x 5.0 mm (0.012” X 0.196”),
Sold per pair
| UFT- 6 PW2954C
UFT- 7 PW2954C| Power Wedge, two-way use, tip and long side,
(Ø x L) 0.29 x 5.4 mm (0.011” X 0.213”),
Sold per pair

www.okinternational.com – www.metcal.com

References

• Metcal - Advanced Manufacturing Solutions
• Metcal - Advanced Manufacturing Solutions
• OK International - Global Advanced Manufacturing Equipment

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>