METCAL PTC-6 PTC Tweezer Cartridges User Manual
- June 12, 2024
- METCAL
Table of Contents
PTC Tweezer Cartridges are compatible with MX-500, MX-5000, MX-5200 and CV-5200, CV-500 Systems MX-PTZ and CV-H4-PTZ Tweezer Hand pieces.
PTTC Tweezer-Cartridges are compatible with MX-500, MX-5000, MX-5200 and CV-5200, CV-500 Systems - MX-PTZ and CV-H4-PTZ Tweezer Hand pieces.
Temperature
| CV-Serie| MX-Serie| Application
---|---|---|---
675 °F/357 °C| PTC-6| PTTC-6|
Temperature Sensitive
775 °F/413 °C
| PTC-7| PTTC-7| Most Standard
875 °F/468 °C| PTC-8| |
Ceramic and High Thermal Demand
925 °F/496 °C
| PTC-9|
PTTC-8
Please note the above temperatures are the maximum temperatures of the heater. The idle temperature is dependent on the geometry of the cartridge (up to 15 °C lower).
These tips will provide data via the CV power supplies, but due to the nature of their application the Connection Validation function is not required and therefore not enabled. All tweezer cartridges are sold per pair.
Rework Tweezer Cartridges – Bent
| PTC-6CN1404A
PTC-7CN1404A
PTC-8CN1404A
PTC-9CN1404A| PTTC-601B
PTTC-701B
—
PTTC-801B| Conical, 30° bent, for work under a microscope,
(Ø x L) 0.4 x 14.3 mm
(0.016” x 0.56”), Sold per pair
| PTC-6FB1235R
PTC-7FB1235R
PTC-8FB1235R
PTC-9FB1235R| PTTC-608B
PTTC-708B
—
PTTC-808B| Blade, 30° bent, for work under a microscope,
(W x L) 3.2 x 12.1 mm
(0.14” x 0.48”),
Rework Tweezer Cartridges – Conical
| PTC-6CN2304A
PTC-7CN2304A
PTC-8CN2304A
PTC-9CN2304A| PTTC-601
PTTC-701
—
PTTC-801| Conical,
(Ø x L) 0.4 x 19 mm (0.016”x0.7”)
Sold per pair
Rework Tweezer Cartridges – Blade
| PTC-6CH1713A
PTC-7CH1713A
PTC-8CH1713A
PTC-9CH1713A| PTTC-602
PTTC-702
—
PTTC-802| Blade,
(W x L) 1.3 x 16.55 mm
(0.05” x 0.65”),
Sold per pair
| PTC-6CH1720A
PTC-7CH1720A
PTC-8CH1720A
PTC-9CH1720A| PTTC-603
PTTC-703
—
PTTC-803| Blade,
(W x L) 2.0 x 16.5 mm
(0.08” x 0.65”),
Sold per pair
| PTC-6BL1306R
PTC-7BL1306R
PTC-8BL1306R
PTC-9BL1306R| PTTC-604
PTTC-704
—
PTTC-804| Blade,
(W x L) 6.35 x 12.7 mm
(0.25” x 0.5”),
Sold per pair
| PTC-6BL1316R
PTC-7BL1316R
PTC-8BL1316R
PTC-9BL1316R| PTTC-605
PTTC-705
—
PTTC-805| Blade,
(W x L) 15.75 x 12.7 mm
(0.63” x 0.5”),
Sold per pair
| PTC-6BL1321R
PTC-7BL1321R
PTC-8BL1321R
PTC-9BL1321R| PTTC-606
PTTC-706
—
PTTC-806| Blade,
(W x L) 20.6 x 12.7 mm
(0.81″ x 0.5”),
Sold per pair
| PTC-6BL1328R
PTC-7BL1328R
PTC-8BL1328R
PTC-9BL1328R| PTTC-607
PTTC-707
—
PTTC-807| Blade,
(W x L) 28 x 12.7 mm
(1.1″ x 0.05”),
Sold per pair
www.okinternational.com – www.metcal.com
References
- Metcal - Advanced Manufacturing Solutions
- Metcal - Advanced Manufacturing Solutions
- OK International - Global Advanced Manufacturing Equipment