METCAL DSC-6 DSC De-Solder Cartridges User Manual
- June 12, 2024
- METCAL
Table of Contents
DSC-6 DSC De-Solder Cartridges
DSC De-Solder Cartridges are compatible with MX-500, MX-5000, MX-5200 AND
CV-5200, CV-500 Systems – MX-DS1 and CV-H5-DS Hand pieces.
STDC De-Solder Cartridges are compatible with MX-500, MX-5000 and MX-5200
Systems – MX-DS1 Hand piece.
| Temperature | CV-Serie | MX-Serie | Application |
|---|---|---|---|
| 675 °F/357 °C | DSC-6 | STDC-0 | Temperature Sensitive |
| 775 °F/413 °C | DSC-7 | STDC-1 / 7xxL | Most Standard |
| 875 °F/468 °C | DSC-8 | Ceramic and High Thermal Demand | |
| 925 °F/496 °C | DSC-9 | STDC-8 |
Please note the above temperatures are the maximum temperatures of the heater.
The idle temperature is dependent on the geometry of the cartridge (up to 15
˚C lower.)
These tips will provide data via the CV series power supplies, but due to the
nature of their application the Connection Validation function is not required
and therefore, not enabled
| Desolder Cartridges | A | B | C |
|---|
Long Reach
DSC-xxxA /STDC-xxxL = Long Reach Desolder Cartridge to remove
components form high density packed PCB’s.
| DSC- CN0006S| STDC- 02| | | |
–
STANDARD
DSC- CN0006S| STDC- 02| 0.64 mm| 1.40 mm| 11.43 mm
DSC- CN0006S| | (0.025″)| (0.055″)| (0.45″)
DSC- CN0006S| STDC- 02| | |
DSC- CN0008S| STDC- 03| | |
DSC- CN0008S| STDC- 03| 0.76 mm| 1.68 mm| 11.17 mm
DSC- CN0008S| | (0.029″)| (0.066″)| (0.44″)
DSC- CN0008S| STDC- 03| | |
DSC- CNO010S| STDC- 04| | |
DSC- CNO010S| STDC- 04| 1.02 mm| 1.78 mm| 10.92 mm
DSC- CNO010S| | (0.04″)| (0.07″)| (0.43″)
DSC- CNO010S| STDC- 04| | |
DSC- CNO013S| STDC- 05| | |
DSC- CNO013S| STDC- 05| 1.27 mm| 2.03 mm| 10.66 mm
DSC- CNO013S| | (0.05″)| (0.08″)| (0.42″)
DSC- CNO013S| STDC- 05| | |
DSC- CNO015S| STDC- 06| | |
DSC- CNO015S| STDC- 06| 1.52 mm| 2.29 mm| 10.41 mm
DSC- CNO015S| | (0.06″)| (0.09″)| (0.41″)
DSC- CNO015S| STDC- 06| | |
DSC- CNO024S| STDC- 07| | |
DSC- CNO024S| STDC- 07| 2.41 mm| 3.18 mm| 9.14 mm
DSC- CNO024S| | (0.09″)| (0.12″)| (0.36″)
DSC- CNO024S| STDC- 07| | |
DSC- CN0008A| | | |
DSC- CN0008A| STDC- 03L| 0.76 mm| 1.68 mm| 21.33 mm
DSC- CN0008A| | (0.03″)| (0.06″)| (0.84″)
DSC- CN0008A| STDC- 03L| | |
DSC- CNO010A| | | |
DSC- CNO010A| STDC- 04L| 1.02 mm| 1.79 mm| 21.08 mm
DSC- CNO010A| | (0.04″)| (0.07″)| (0.83″)
DSC- CNO010A| STDC- 04L| | |
DSC- CNO013A| | | | | LONG REACH
DSC- CNO013A| STDC- 05L| 1.27 mm| 2.03 mm| 20.82 mm
DSC- CNO013A| | (0.05″)| (0.08″)| (0.82″)
DSC- CNO013A| STDC- 05L| | |
www.okinternational.com
– www.metcal.com
References
- Metcal - Advanced Manufacturing Solutions
- Metcal - Advanced Manufacturing Solutions
- OK International - Global Advanced Manufacturing Equipment