METCAL STTC-847 CVC Cartridge User Manual

: June 12, 2024
: METCAL

Table of Contents

References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

METCAL STTC-847 CVC Cartridge

CVC Cartridges are compatible with MX-500, MX-5000, MX-5200 and CV-5200, CV-500 Systems – MX-RM3E, MX-RM6E, MX-H1-AV, MX-H7-SF – CV-H1-AV and CV-H7-AV Solder Hand pieces.

STTC Cartridges are compatible with MX-500, MX-5000 and MX-5200 Systems – MX- RM3E, MX-RM6E, MX-H1-AV and MX-H7-SF Solder Hand pieces.

Temperature

| CV-Serie| MX-Serie|

Application

---|---|---|---

575 °F/302 °C

|

CVC- 5 xxx

| STTC- 5 xx|

Temperature Sensitive

675 °F/357 °C

|

CVC- 6 xxx

| STTC- 0 xx

775 °F/413 °C

|

CVC- 7 xxx

| STTC- 1 xx|

Most Standard

875 °F/468 °C

|

CVC- 8 xxx

| STTC- 8 xxV1|

Ceramic and High Thermal Demand

925 °F/496 °C

|

CVC- 9 xxx

| STTC- 8 xx

Please note the above temperatures are the maximum temperatures of the heater. The idle temperature is dependent on the geometry of the cartridge (up to 15 °C lower.)

Bevel Cartridges

| CVC- 5 BV6005A
CVC- 6 BV6005A
CVC- 7 BV6005A
CVC- 8 BV6005A CVC- 9 BV6005A| STTC- 5 46
STTC- 0 46
STTC- 1 46
STTC- 8 46V1
STTC- 8 46| Long reach,
(Bevel/L) 60° x 1 mm,
(ø x L) 0.50 x 14.2 mm (.04″x .56″)
| CVC- 5 BV6018P
CVC- 6 BV6018P
CVC- 7 BV6018P
CVC- 8 BV6018P
CVC- 9 BV6018P| STTC- 5 47P STTC- 0 47P
STTC- 1 47P
STTC- 8 47PV1
STTC- 8 47P| (Bevel/L) 60° x 1.78 mm,
optimised geometry for best thermal performance,
(ø x L) 0.83 x 6.4 mm (.07″ x .25″)
| CVC- 5 BV6018R
CVC- 6 BV6018R
CVC- 7 BV6018R
CVC- 8 BV6018R
CVC- 9 BV6018R| STTC- 5 47
STTC- 0 47
STTC- 1 47
STTC- 8 47V1
STTC- 8 47| Long reach,
(Bevel/L 60°) x 1.78 mm,
(ø x L) 0.83 x 14.2 mm (.07″x .56″)
| CVC- 5 BV4001S
CVC- 6 BV4001S
CVC- 7 BV4001S
CVC- 8 BV4001S
CVC- 9 BV4001S| STTC- 5 24
STTC- 0 24
STTC- 1 24
STTC- 8 24V1
STTC- 8 24| (Bevel/L) 30° x 1.49 mm,
(ø x L) 1.23 x 9.3 mm (.059″x .367″)
| CVC- 5 BV3018P
CVC- 6 BV3018P
CVC- 7 BV3018P
CVC- 8 BV3018P
CVC- 9 BV3018P| STTC- 5 15 STTC- 0 15
STTC- 1 15
STTC- 8 15V1
STTC- 8 15| (Bevel/L) 30° x 1.47 mm,
optimised geometry for best thermal performance,
(ø x L) 1.3 x 3.9 mm (.05” x 0153”)
| CVC- 5 BV6018S
CVC- 6 BV6018S
CVC- 7 BV6018S
CVC- 8 BV6018S
CVC- 9 BV6018S| STTC- 5 35
STTC- 0 35
STTC- 1 35
STTC- 8 35V1
STTC- 8 35| (Bevel/L) 30° x 2.06 mm,
(ø x L) 1.78 x 9.9 mm (.07″x .39″)
| CVC- 5 BV3018S
CVC- 6 BV3018S
CVC- 7 BV3018S
CVC- 8 BV3018S
CVC- 9 BV3018S| STTC- 5 05
STTC- 0 05
STTC- 1 05
STTC- 8 05V1
STTC- 8 05| (Bevel/L) 30° x 2.06 mm,
(ø x L) 1.78 x 11.7 mm (.07″x .39″)

Chisel Cartridges

| CVC- 5 CH0010P
CVC- 6 CH0010P
CVC- 7 CH0010P
CVC- 8 CH0010P
CVC- 9 CH0010P| STTC- 5 25P
STTC- 0 25P
STTC- 1 25P
STTC- 8 25PV1
STTC- 8 25P| Optimised geometry for best thermal performance,
(W x L) 1.0 x 6.0 mm (.04″ x .24″)
| CVC- 5 CH0010A
CVC- 6 CH0010A
CVC- 7 CH0010A
CVC- 8 CH0010A
CVC- 9 CH0010A| N/A| Long reach,
for work in tight spaces,
(W x L) 1.0 x 12.4 mm
(.0.4″ x .0.49″)
| CVC- 5 CH0010S
CVC- 6 CH0010S
CVC- 7 CH0010S
CVC- 8 CH0010S
CVC- 9 CH0010S| STTC- 5 25
STTC- 0 25
STTC- 1 25
STTC- 8 25V1
STTC- 8 25| (W x L) 1.0 x 9.1 mm (.04″x .33″)
| CVC- 5 CH0014P
CVC- 6 CH0014P
CVC- 7 CH0014P
CVC- 8 CH0014P
CVC- 9 CH0014P| STTC- 5 38P
STTC- 0 38P
STTC- 1 38P
STTC- 8 38PV1
STTC- 8 38P| Optimised geometry for best thermal performance,
(W x L) 1.4 x 6.0 mm (.06″ x .24″)
| CVC- 5 CH0014S
CVC- 6 CH0014S
CVC- 7 CH0014S
CVC- 8 CH0014S
CVC- 9 CH0014S| STTC- 5 38
STTC- 0 38
STTC- 1 38
STTC- 8 38V1
STTC- 8 38| (W x L) 1.5 x 9.9 mm (.06″ x .39″)
| CVC- 5 CH0015A
CVC- 6 CH0015A
CVC- 7 CH0015A
CVC- 8 CH0015A
CVC- 9 CH0015A| N/A| Long reach,
for work in tight spaces,
(W x L) 1.5 x 12.4 mm (.06″ x 0.49″)
| CVC- 5 CH0015R
CVC- 6 CH0015R
CVC- 7 CH0015R
CVC- 8 CH0015R
CVC- 9 CH0015R| STTC- 5 99
STTC- 0 99
STTC- 1 99
STTC- 8 99V1
STTC- 8 99| Bent 30°, for work under a microscope,
(W x L) 1.5 x 11.9 mm (.06″ x .47″)
| CVC- 5 CH0018A
CVC- 6 CH0018A
CVC- 7 CH0018A
CVC- 8 CH0018A
CVC- 9 CH0018A| STTC- 5 42
STTC- 0 42
STTC- 1 42
STTC- 8 42V1
STTC- 8 42| Long reach, flat,
for work in tight spaces,
(W x L) 1.78 x 16mm (.07″ x .63″)
| CVC- 5 CH0018L
CVC- 6 CH0018L
CVC- 7 CH0018L
CVC- 8 CH0018L
CVC- 9 CH0018L| STTC- 5 37LL
STTC- 0 37LL
STTC- 1 37LL
STTC- 8 37LLV1
STTC- 8 37LL| Long life plating,
(W x L) 1.78 x 1.0 mm (.07″ x .24″)
| CVC- 5 CH0018S
CVC- 6 CH0018S
CVC- 7 CH0018S
CVC- 8 CH0018S
CVC- 9 CH0018S| STTC- 5 37
STTC- 0 37
STTC- 1 37
STTC- 8 37V1
STTC- 8 37| (W x L) 1.78 x 9.9 mm (.07″ x .39″)
| CVC- 5 CH0018P
CVC- 6 CH0018P
CVC- 7 CH0018P
CVC- 8 CH0018P
CVC- 9 CH0018P| STTC- 5 37P
STTC- 0 37P
STTC- 1 37P
STTC- 8 37PV1
STTC- 8 37P| Optimised geometry for best thermal performance,
(W x L) 1.8 x 6.0 mm (.07″ x .24″)
| CVC- 5 CH0018R
CVC- 6 CH0018R
CVC- 7 CH0018R
CVC- 8 CH0018R
CVC- 9 CH0018R| STTC- 5 98
STTC- 0 98
STTC- 1 98
STTC- 8 98V1
STTC- 8 98| Bend 30°, for work under a microscope,
(W x L) 1.8 x 10.0 mm (.07″ x0.4″)
| CVC- 5 CH0020S
CVC- 6 CH0020S
CVC- 7 CH0020S
CVC- 8 CH0020S
CVC- 9 CH0020S| STTC- 5 14
STTC- 0 14
STTC- 1 14
STTC- 8 14V1
STTC- 8 14| Optimised geometry for best thermal performance,
(W x L) 2.0 x 4.7 mm (.08″ x .19″)
| CVC- 5 CH0020A
CVC- 6 CH0020A
CVC- 7 CH0020A
CVC- 8 CH0020A
CVC- 9 CH0020A| N/A| Long reach,
for work in tight spaces,
(W x L) 2.0 x 12.4 mm (.08″ x 0.49″)
| CVC- 5 CH0025A
CVC- 6 CH0025A
CVC- 7 CH0025A
CVC- 8 CH0025A
CVC- 9 CH0025A| N/A| Long reach,
for work in tight spaces,
(W x L) 2.5 x 12.4 mm (.10″ x .49″)
| CVC- 5 CH0025P
CVC- 6 CH0025P
CVC- 7 CH0025P
CVC- 8 CH0025P
CVC- 9 CH0025P| STTC- 5 36P
STTC- 0 36P
STTC- 1 36P
STTC- 8 36PV1
STTC- 8 36P| Optimised geometry for best thermal performance,
(W x L) 2.5 x 6.0 mm (.10″ x .24″)
| CVC- 5 CH0025S
CVC- 6 CH0025S
CVC- 7 CH0025S
CVC- 8 CH0025S
CVC- 9 CH0025S| STTC- 5 36
STTC- 0 36
STTC- 1 36
STTC- 8 36V1
STTC- 8 36| (W x L) 2.5 x 9.9 mm (.10″ x .39″)
| CVC- 5 CH0034S
CVC- 6 CH0034S
CVC- 7 CH0034S
CVC- 8 CH0034S
CVC- 9 CH0034S| STTC- 5 03
STTC- 0 03
STTC- 1 03
STTC- 8 03V1
STTC- 8 03| (W x L) 2.8 x 8.6 mm (.11″ x .34″)
| CVC- 5 CH0030S
CVC- 6 CH0030S
CVC- 7 CH0030S
CVC- 8 CH0030S
CVC- 9 CH0030S| STTC- 5 13
STTC- 0 13
STTC- 1 13
STTC- 8 13V1
STTC- 8 13| Optimised geometry for best thermal performance,
(W x L) 3.0 x 4.8 mm (.12″ x .19″)
| CVC- 5 CH0035S
CVC- 6 CH0035S
CVC- 7 CH0035S
CVC- 8 CH0035S
CVC- 9 CH0035S| N/A| (W x L) 3.5 x 8.13 mm
(.14″ x .32″)
| CVC- 5 CH0035P
CVC- 6 CH0035P
CVC- 7 CH0035P
CVC- 8 CH0035P
CVC- 9 CH0035P| N/A| Optimised geometry for best thermal performance,
(W x L) 3.5 x 6.13 mm
(.14″ x .24″)
| CVC- 5 CH2238A
CVC- 6 CH2238A
CVC- 7 CH2238A
CVC- 8 CH2238A
CVC- 9 CH2238A| STTC- 5 20
STTC- 0 20
STTC- 1 20
STTC- 8 20V1
STTC- 8 20| Long reach, flat,
for work in tight spaces,
(W x L) 3.8 x 21.6 mm
(.15″ x .85″)
| CVC- 5 CH0040P
CVC- 6 CH0040P
CVC- 7 CH0040P
CVC- 8 CH0040P
CVC- 9 CH0040P| N/A| Optimised geometry for best thermal performance,
(W x L) 4.2 x 6.0 mm
(.165″ x .24″)
| CVC- 5 CH0040S
CVC- 6 CH0040S
CVC- 7 CH0040S
CVC- 8 CH0040S
CVC- 9 CH0040S| N/A| (W x L) 4.2 x 7.6 mm (.17″ x .3″)
| CVC- 5 CH0050A
CVC- 6 CH0050A
CVC- 7 CH0050A
CVC- 8 CH0050A
CVC- 9 CH0050A| STTC- 5 65
STTC- 0 65
STTC- 1 65
STTC- 8 65V1
STTC- 8 65| Long reach,
(W x L) 5.0 x 11.4 mm
(.20″ x .45″)
| CVC- 5 CH0050S
CVC- 6 CH0050S
CVC- 7 CH0050S
CVC- 8 CH0050S
CVC- 9 CH0050S| STTC- 5 17
STTC- 0 17
STTC- 1 17
STTC- 8 17V1
STTC- 8 17| (W x L) 5.0 x 7.6 mm (.20″ x .30”)
| CVC- 5 CH0050P
CVC- 6 CH0050P
CVC- 7 CH0050P
CVC- 8 CH0050P
CVC- 9 CH0050P| N/A| Optimised geometry for best thermal performance,
(W x L) 5.23 x 6.0 mm
(.21″ x .24”)

Conical Cartridges

| CVC- 5 CN0003A
CVC- 6 CN0003A
CVC- 7 CN0003A
CVC- 8 CN0003A
CVC- 9 CN0003A| STTC- 5 90
STTC- 0 90
STTC- 1 90
STTC- 8 90V1
STTC- 8 90| Fine, long reach,
for work in tight spaces,
(ø x L) 0.25 x 13.2 mm (.01″x .52″)
| CVC- 5 CN0004P
CVC- 6 CN0004P
CVC- 7 CN0004P
CVC- 8 CN0004P
CVC- 9 CN0004P| STTC- 5 45P STTC- 0 45P
STTC- 1 45P
STTC- 8 45PV1
STTC- 8 45P| Sharp,
optimised geometry for best thermal performance,
(ø x L) 0.4 x 8.5 mm (.016″ x .34″
| CVC- 5 CN0004R
CVC- 6 CN0004R
CVC- 7 CN0004R
CVC- 8 CN0004R
CVC- 9 CN0004R| STTC- 5 26
STTC- 0 26
STTC- 1 26
STTC- 8 26V1
STTC- 8 26| Sharp, Bent 30°, for work under a microscope,
(ø x L) 0.4 x 7.9 mm (.016″ x .31″)
| CVC- 5 CN1304A
CVC- 6 CN1304A
CVC- 7 CN1304A
CVC- 8 CN1304A
CVC- 9 CN1304A| STTC- 5 06
STTC- 0 06
STTC- 1 06
STTC- 8 06V1
STTC- 8 06| Sharp, long reach,
(ø x L) 0.4 x 13.7 mm (.016″x .54″)
| CVC- 5 CN1404S
CVC- 6 CN1404S
CVC- 7 CN1404S
CVC- 8 CN1404S
CVC- 9 CN1404S| STTC- 5 22
STTC- 0 22
STTC- 1 22
STTC- 8 22V1
STTC- 8 22| Sharp,
(ø x L) 0.4 x 8.4 mm (.016″ x .33″)
| CVC- 5 CN1504A
CVC- 6 CN1504A
CVC- 7 CN1504A
CVC- 8 CN1504A
CVC- 9 CN1504A| STTC- 5 45
STTC- 0 45
STTC- 1 45
STTC- 8 45V1
STTC- 8 45| Sharp, long reach,
(ø x L) 0.4 x 14.7 mm (.016″x .58″)
| CVC- 5 CN1604R
CVC- 6 CN1604R
CVC- 7 CN1604R
CVC- 8 CN1604R
CVC- 9 CN1604R| STTC- 5 40
STTC- 0 40
STTC- 1 40
STTC- 8 40V1
STTC- 8 40| Sharp, long reach, bent 30°, for work under a microscope,
(ø x L) 0.4 x 16 mm (.016″ x .63″)
| CVC- 5 CN0005A
CVC- 6 CN0005A
CVC- 7 CN0005A
CVC- 8 CN0005A
CVC- 9 CN0005A| STTC- 5 43
STTC- 0 43
STTC- 1 43
STTC- 8 43V1
STTC- 8 43| Sharp, long reach,
(ø x L) 0.5 x 15.2 mm (.02″ x .6″)
| CVC- 5 CN0005R
CVC- 6 CN0005R
CVC- 7 CN0005R
CVC- 8 CN0005R
CVC- 9 CN0005R| STTC- 5 44
STTC- 0 44
STTC- 1 44
STTC- 8 44V1
STTC- 8 44| Sharp, long reach, bent 30°, for work under a microscope,
(ø x L) 0.5 x 14.5 mm (.02″ x .57″)
| CVC- 5 CN0005S
CVC- 6 CN0005S
CVC- 7 CN0005S
CVC- 8 CN0005S
CVC- 9 CN0005S| STTC- 5 11
STTC- 0 11
STTC- 1 11
STTC- 8 11V1
STTC- 8 11| Blunt, optimised geometry for best thermal performance,
(ø x L) 0.5 x 4.6 mm (.02″ x .18″)
| CVC- 5 CN4805S
CVC- 6 CN4805S
CVC- 7 CN4805S
CVC- 8 CN4805S
CVC- 9 CN4805S| STTC- 5 16
STTC- 0 16
STTC- 1 16
STTC- 8 16V1
STTC- 8 16| Blunt, Optimised geometry for best thermal performance,
(ø x L) 0.5 x 4.8 mm (.02″ x .19″)
| CVC- 5 CN0010A
CVC- 6 CN0010A
CVC- 7 CN0010A
CVC- 8 CN0010A
CVC- 9 CN0010A| STTC- 5 01
STTC- 0 01
STTC- 1 01
STTC- 8 01V1
STTC- 8 01| Long reach,
(ø x L) 1.0 x 13.5 mm (.04″ x .53″)
| CVC- 5 CN0010P
CVC- 6 CN0010P
CVC- 7 CN0010P
CVC- 8 CN0010P
CVC- 9 CN0010P| STTC- 5 01P
STTC- 0 01P
STTC- 1 01P
STTC- 8 01PV1
STTC- 8 01P| Optimised geometry for best thermal performance,
(ø x L) 1.0 x 6.5 mm (.04″ x .25″)
| CVC- 5 CN0010S
CVC- 6 CN0010S
CVC- 7 CN0010S
CVC- 8 CN0010S
CVC- 9 CN0010S| STTC- 5 31
STTC- 0 31
STTC- 1 31
STTC- 8 31V1
STTC- 8 31| (ø x L) 1.0 x 9.9 mm (.04″ x .39″)
| CVC- 5 CN1710A
CVC- 6 CN1710A
CVC- 7 CN1710A
CVC- 8 CN1710A
CVC- 9 CN1710A| STTC- 5 07
STTC- 0 07
STTC- 1 07
STTC- 8 07V1
STTC- 8 07| Long reach,
(ø x L) 1.0 x 16.7 mm (.04″ x .66″)
| CVC- 5 CN0013R
CVC- 6 CN0013R
CVC- 7 CN0013R
CVC- 8 CN0013R
CVC- 9 CN0013R| STTC- 5 41
STTC- 0 41
STTC- 1 41
STTC- 8 41V1
STTC- 8 41| Bent 30°, for work under a microscope, Long Reach,
for work in tight spaces,
(ø x L) 1.3 x 21.8 mm (.05″ x .86″)
| CVC- 5 CN1002S
CVC- 6 CN1002S
CVC- 7 CN1002S
CVC- 8 CN1002S
CVC- 9 CN1002S| STTC- 5 32
STTC- 0 32
STTC- 1 32
STTC- 8 32V1
STTC- 8 32| Blunt,
(ø x L) 1.52 x 9.78 mm (.10″x .385″)
| CVC- 5 CN1208S
CVC- 6 CN1208S
CVC- 7 CN1208S
CVC- 8 CN1208S
CVC- 9 CN1208S| STTC- 5 02
STTC- 0 02
STTC- 1 02
STTC- 8 02V1
STTC- 8 02| (ø x L) 1.8 x 12 mm (.07″x .48″)
| CVC- 5 CN4302S
CVC- 6 CN4302S
CVC- 7 CN4302S
CVC- 8 CN4302S
CVC- 9 CN4302S| STTC- 5 12
STTC- 0 12
STTC- 1 12
STTC- 8 12V1
STTC- 8 12| Blunt, optimised geometry for best thermal performance,
(ø x L) 2.0 x 4.3 mm (.8″ x .17″)

U- / V-Groove Cartridges – For Pin Soldering

| CVC- 5 LG1802A
CVC- 6 LG1802A
CVC- 7 LG1802A
CVC- 8 LG1802A| STTC- 5 83
STTC- 0 83
STTC- 1 83
STTC- 8 83V1| U-Groove for pin soldering,
groove (ø x L) 0.89 x 8.4 mm,
(Total ø x L) 1.9 x 17.8 mm
(.08″ x .70″)
| CVC- 5 VG0016A
CVC- 6 VG0016A
CVC- 7 VG0016A
CVC- 8 VG0016A
CVC- 9 VG0016A| N/A| V-Groove for pin soldering,
grove (W x L) 0.8 x 3 mm,
(W x L) 1.6 x 6.12 mm (.06″ x .25″)
| CVC- 5 VG0016P
CVC- 6 VG0016P
CVC- 7 VG0016P
CVC- 8 VG0016P
CVC- 9 VG0016P| N/A| V-Groove for pin soldering,
Optimised geometry for best thermal performance,
grove (W x L) 0.8 x 3,5 mm,
(W x L) 1.6 x 6 mm (.06″ x .24″)
| CVC- 5 VG0032A
CVC- 6 VG0032A
CVC- 7 VG0032A
CVC- 8 VG0032A
CVC- 9 VG0032A| N/A| V-Groove for pin soldering,
grove (W x L) 1.0 x 3 mm,
(W x L) 3.2 x 10.35 mm (.12″ x .41″)
| CVC- 5 VG0032P
CVC- 6 VG0032P
CVC- 7 VG0032P
CVC- 8 VG0032P
CVC- 9 VG0032P| N/A| V-Groove for pin soldering,
Optimised geometry for best thermal performance,
grove (W x L) 1.0 x 4 mm,
(W x L) 3.2 x 5.75 mm (.12″ x .23″)