tuya FL04T Folding LED Lamp User Guide

tuya FL04T Folding LED Lamp

Installation Diagram

The picture shows the size or manual measurement subject to the actual object.

Product List

1. Lamp
2. Controller )
3. Remote Control
4. Manual
5. Screwdriver
6. Base
7. Nuts

Product installation steps

1. Remove the screw cap
2. Screw in the Lamp
3. Adjust the shape you like, then lock it with a 6-angle screwdriver
4. Use your phone to scan the QR code (APP download)

After the product design is good oneself likes the shape, installs the rotation joint to lock tightly again!!!

Note: If you want the light to change any shape, be sure to loosen each rotating joint, adjust the shape you want, and then lock again.

Instructions For The Receiving Controller

You need to pay attention

• Working temperature: -20~50°C
• Input Volt.: DC 5V/2A
• Remote control distance : <10 meters.
• Remote control : Advanced IR technology

Instructions for Remote Control

The remote control has 24 buttons, the way is: IR

Note

1. Don’t set it arbitrarily, otherwise the corresponding color will be changed, such as red to blue.
2. If the remote control is out of control, please check if it is locked o check its battery.
3. Remove the plastic film before use.

Instructions for use of led controller
IOS and Android systems can download the APP by scanning the QR code. open the browser or other tools with “scan QR code” Function, scan the QR code as below

Use your phone to scan the OR code

APP Installation steps
Click TUYA on the APP icon enter the app page. After entering the App interface, if WIFI is not enabled, an application wants to enable the WIFI (wifi-2.4G) function of this device click allow

1. Connect the lamp to the power supply.
2. Turn on the mobile phone WIFI (2.4G) function, scan Receive the code on the box and download the mobile APP
3. The product adopts USB cable 5V/2A, which can be connected to any USB port for power supply, which is convenient, stable and safe.

App Instructions
After downloading the software, register. The lamp is energized, and then the lamp is initialized and restored. Long press the switch button for 5 seconds or switch the power supply three times, the flicker of light indicates that the restoration is successful Then enter the APP and follow the instructions.

Note

1. Press the controller switch button for 5 Seconds to restore the lighting state
2. Network settings : 2.4G network.

Control device
After successfully connecting the devices, the related smart device will be shown on the home page. Tap to enter its control page.

Note

1. when device is online ,it supports quick operations.
2. when device is offline, it displays “Offline”. and can not be controlled.

LED Lamp Sync to Music
Function Enter music mode and play music with any device, and the led lamp will sync to music

Note: The volume of mobile phone is relatively small, it’s better to use Bluetooth audio

1. Customers can choose mobile phone microphone or device microphone according to different needs.
2. Customers can choose different modes according to different scenarios

LED Lamp Mode Function
Choose their favorite mode according to the scene.

1. Click Edit in the top right corner to enter custom scene.
2. You can DIY their own mode according to their preferences.
3. You can add/delete/ modify the color displayed and change the speed of color switching.
4. It vou are not satisficed, vou can reset the settings

Point settings

The number of light source points of the lamp is se

Each module has 60 points. When connected in series, the number of points in each module is doubled. The more accurate the point setting is, the better the lighting display attest is.

Do not change the settings at will if you change it, it will affect the normal use of the product

1. The color should not match the remote control.
2. The change of the number of points will affect the dynamic effect of the light.

If you have any question after receiving the products, please contact our customer service ,we will reply to you within 24 hours.

Common Problem

1. Check if the power supply is normal.
2. Check if the Bluetooth is turn on.
3. Check if there are other mobile phone are connected, only support connections one to many, dose not support many to many.
4. Check APP Bluetooth setting if the phone is connected to the device, if connect, exit the APP and reopen, the APP will go to connect automatically.
5. Normal operations and can not connect, please exit the APP and reopen.
6. Exit APP, restart mobile phone, power on the strip light, reopen the APP, then them will connect automatically.

WARNING
DO NOT IMMERSE IN FIRE CHILDREN UNDER THE AGE OF 16S HOULD USE THIS PRODUCT UNDER ADULT SUPERVISION

Thank you for buying this product.
To Provide an excellent user experience, please install it according to these instructions and then give the instructions to appropriate person for retention and future referrer.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>