BRAINZ 17929 Painting Speaker Instruction Manual
- June 14, 2024
- BRAINZ
Table of Contents
BRAINZ 17929 Painting Speaker Instruction Manual
What you need
- DC5V/USB Cable (included)
- Mobile phone, tablet, or laptop with Bluetooth (not included)
How to charge the Painting Speaker
Place the included DC5V cable at the back of the Painting speaker and connect
the USB side to a power source. Once you’ve done this, the speaker will start
charging.
Setting up the device
The speaker can be used as a Bluetooth speaker. Press the Power button on the
back of the speaker for 3 seconds. When you want to establish a Bluetooth
connection, open the Bluetooth menu on your phone or another Bluetooth device
and search for ‘BRAINZ Painting Speaker. Click on it and wait for your device
to display a notification that it’s connected to the speaker.
Volume
To adjust the volume of the Painting Speaker, use the buttons on your phone or
your Bluetooth device.
Pausing music
Press the pause button once (I) to pause the music. Repeat this action to
resume playing the music.
Next/previous song
To skip to the next or previous track, use your phone or Bluetooth device.
Note: Do not use a charger with a higher voltage than what is suitable for this product.
This manual is valid for article number 17929.
For more information about this product, please visit www.brainz-
electronics.nl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>