tuya PST-WVS101 Wireless Vibration Sensor User Manual
- June 14, 2024
- Tuya
Table of Contents
tuya PST-WVS101 Wireless Vibration Sensor
These Wireless Vibration Detectors are designed to be attached to vulnerable
doors and windows and will activate the alarm if someone tries to force or
break them open, a perfect solution to large risk window panes or weak doors.
this wireless vibration sensor should work with alarm host together. Powered
by a simple 12v MN21 Battery, they can be installed anywhere.
Product Information
Specifications
- Model: PST-WVS101
- Wireless Vibration Sensor
Product Usage Instructions
Introduction
The Wireless Vibration Sensor (Model: PST-WVS101) is a cutting-edge device
designed to detect and monitor vibrations in various applications. It provides
a wireless solution for measuring and analyzing vibrations, allowing users to
identify potential issues and take necessary actions.
Installation
To install the Wireless Vibration Sensor, follow these steps:
- Choose a suitable location for the sensor, ensuring it is securely mounted.
- Connect the sensor to a power source using the provided power adapter.
- Ensure that the sensor is within the wireless range of the receiver or monitoring system.
- Verify the sensor’s connectivity by checking the LED indicator on the device.
Configuration
Before using the Wireless Vibration Sensor, it needs to be configured
according to your specific requirements. Follow these steps:
- Access the configuration settings by connecting the sensor to a computer using a USB cable.
- Install the required software provided by the manufacturer.
- Launch the software and follow the on-screen instructions to configure the sensor settings, such as sensitivity levels and data recording intervals.
- Save the configurations and disconnect the sensor from the computer.
Data Monitoring and Analysis
The Wireless Vibration Sensor continuously collects vibration data and
transmits it to the receiver or monitoring system. To monitor and analyze the
data:
- Ensure that the receiver or monitoring system is properly set up and connected to the sensor.
- Access the monitoring software or interface provided by the manufacturer.
- View real-time vibration data on the software’s dashboard or interface.
- Utilize the analysis tools and features provided to identify patterns, anomalies, and potential issues.
Maintenance
To ensure optimal performance and longevity of the Wireless Vibration
Sensor, follow these maintenance guidelines:
- Regularly clean the sensor using a soft, dry cloth to remove any dust or debris.
- Avoid exposing the sensor to extreme temperatures or humidity.
- Check the sensor’s power supply and connection periodically.
- Refer to the user manual for any additional maintenance instructions specific to your model.
Size
(not including aerial)
- Switch: 70 (L) x 35 (W) x 15 (D) mm.
- Extendable Aerial from 40 – 140 mm.
Installation Method
- Switch: Double sided tape (included) or additional screws for some H/D applications (not included).
- Battery Type: 12v MN21.
- Battery Life: 6 – 12 months (normal use).
Frequently Asked Questions (FAQ)
-
Q1: How far is the wireless range of the Wireless Vibration Sensor?
The wireless range of the sensor may vary depending on environmental factors and obstacles. However, in optimal conditions, it can typically reach up to 100 meters (328 feet). -
Q2: Can the sensor be used outdoors?
Yes, the Wireless Vibration Sensor can be used outdoors. However, it should be protected from direct exposure to rain, excessive sunlight, and extreme weather conditions. Consider using a weatherproof enclosure if necessary. -
Q3: Can multiple sensors be used simultaneously?
Yes, multiple Wireless Vibration Sensors can be used simultaneously within the same monitoring system. Each sensor will need to be configured and connected to the receiver individually. -
Q4: Is the software required for configuring and monitoring the sensor included?
Yes, the required software for configuring and monitoring the Wireless Vibration Sensor is typically provided by the manufacturer. It can be downloaded from their official website or included in the product package.
Shenzhen Professional Security Technology Co., Ltd.
Telenhone No: 0086-755-28187165.
Fax No: 86-755-29484833
Add: A area, 5th floor, 5th Building, Wuwu Industrial tech park, LongHua
street, Bao’an district, Shenzhen China.
Website: www.chinapst.com
E-mail: sales@chinapst.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>