oraimo OWS-A421 Tower Power Bar with Surge Protector User Guide

oraimo OWS-A421 Tower Power Bar with Surge Protector

WELCOME GUIDE

• Please read the instructions carefully before using the product and keep the user manual in a safe place for future reference.

PACKAGE CONTENTS

PRODUCT OVERVIEW

1. Switch
2. AC Outlet
3. Type-C Charging Port
4. USB-A Charging Port
5. Power Indicator Light
6. Plug
7. Surge Protection Light
8. Power Cord

BASIC PRODUCT SPECIFICATIONS

• Dimension: 7575160mm
• Rated Surge Protection: 1800 Joules
• Ratings: 1875W Max. 15A Max. 125V-50/60Hz
• Type-C Output: 20W [5.0V 3.0A, 9.0V 2.2A, 12.0V l.67A)
• USB-A Output: 15W [5.0V 3.0A)
• Total USB Output: 22.5W
• Cord Length: 5 ft/1.5m
• CAN ICES-3[B)/NMB-003(B)
• Manufacture: ORAIMO TECHNOLOGY LIMITED oraimo Lab test result

USAGE INSTRUCTION

1. Plug the power strip tower into a wall outlet.
2. Plug the devices into the AC outlet / USB-A / Type-C port.
3. You may refer to your device to check the charging status.
4. When the charging is completed, unplug the device and power strip the tower from the wall outlet.

• You could rotate the power extension cord to adjust the best charging space.

TROUBLE SHOOTINGS

1. How to Reset
   • When there is a power outage due to overload, and the switch pops up at the same time, please unplug all the devices connected to the power strip tower, and turn on the switch again.
   • Please remember not to use equipment that exceeds the total power of the power strip tower.
2. Why USB-A / Type-C port Is not working

Possible reason

• The power cord of the power strip tower is not completely plugged into the AC wall outlet.

Possible reason

• The total current of the attached electronic devices exceeds the USB-A/Type-C total output.

Solution:

• Reconnect the power strip tower to the AC wall outlet again.

Solution:

• Disconnect some of your electronic devices.

FCC

NOTICE

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio cornrnunica­tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION:
To reduce the risk of electric shock, use only indoors and in dry locations.
Risk of electric shock, do not plug into another relocatable power tap or an extension cord.
Manufacture: ORAIMO TECHNOLOGY LIMITED
Made in China

Warranty Certificate

• Customer’s Name
• Customer’s Address
• Product Model
• Date of Purchase
• This product is covered by an 18-month guarantee from the date of purchase.
• The warranty is valid only when the warranty card is properly completed.
• Warranty is limited to the core product. Accessories included in the package are not covered under warranty.
• Scan to Visit Our Website
• contact@oraimo.com
• us.oralmo.com .
• Keep exploring

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>