GODOX AD200 TTL 2.4G HSS 18000s Pocket Flash Light Instruction Manual

GODOX AD200 TTL 2.4G HSS 18000s Pocket Flash Light

Specifications

• Model: 705-AD2000-00
• Manufacturer: GODOX Photo Equipment Co., Ltd.
• Country of Origin: China

Product Information

The Pocket Flash is a compact and versatile flash unit designed for photography. It comes with a Speedlite flash head and a Bare bulb flash head, providing different lighting options for various shooting scenarios. The flash unit uses a Li-ion polymer battery, which offers a long runtime and can be fully charged in 4 hours using the standard battery charger.

Product Usage Instructions

Attaching Bare bulb flash head

1. Remove the reflector or other accessories from the flash head.
2. Match the red dot on the base of the flash tube with the red dot in the Tube Socket (4).
3. Push the flash tube in until it is securely seated into the socket.

Lithium Battery

The flash unit uses a Li-ion polymer battery, which has the following features:

1. Long runtime: The available charge-and-discharge times are 500.
2. Reliable safety: The inner circuit protects against overcharging, over-discharge, overcurrent, and short circuit.
3. Fast charging: The battery can be fully charged in 4 hours using the standard battery charger.

Included Accessories

• Speedlite flash head
• Bare bulb flash head
• AD-E holder*1
• Battery charger*1
• Lithium battery pack*1
• Protecting bag*1
• Instruction manual*1

Separately Sold Accessories

The product can be used in combination with the following accessories (sold separately) to achieve the best photography effects:

• X1 Wireless Flash Trigger
• FT-16 Remote Control
• Barn door with 4 wings
• Softbox
• Beauty Dish
• Fold up umbrella
• Snoots
• Light Stand

FAQ

Q: How long does it take to charge the Li-ion polymer battery?

• A: The standard battery charger takes approximately 4 hours to fully charge the battery.

Q: How many charge-and-discharge times does the battery support?

• A : The Li-ion polymer battery supports up to 500 charge-and-discharge times.

Q: Are there any safety measures for the battery?

• A: Yes, the inner circuit of the battery protects against overcharge, overcharge, overcurrent, and short circuit.

Q: Can I use the flash unit with other accessories?

• A: Yes, the flash unit can be used with separately sold accessories such as the X1 Wireless Flash Trigger, FT-16 Remote Control, Barn door with 4 wings, Softbox, Beauty Dish, Fold up umbrella, Snoots, and Light stand.

Foreword

Before using this product

• Please read this user manual carefully to ensure your safety and the proper operation of this product. Keep it for future reference.
• Thank you for purchasing a GODOX product.
• WITSTRO TTL Powerful & Portable Flash AD200 include two kinds of flash tube and adopts Godox 2.4G wireless X system. When using the GODOX 2.4G wireless X system of the camera, AD200 can be triggered by an X1 series flash trigger in TTL/M/Muilt mode, etc.
• AD200 can also be used in combination with GODOX TTL camera flashes, TTL outdoor flashes, TTL studio flashes, etc. With this AD200 flash, your shooting will become simpler. You can easily achieve correct flash exposure even in complex light-changing environments.
• WITSTRO flash system is a portable photo lighting solution consisting of camera flashes, wireless triggers, and a range of dedicated light shaping accessories. AD200 with lightweight and portable body, strong power, large capacity battery, and full speed supply. It offers studio-quality light for outdoor and live shooting. The AD200 offers:
• Compatible wireless TTL system: Fully supports Canon E-TTL, Nikon i-TTL, Sony TTL, and other TTL systems in Godox 2.4G wireless X system. Workable as a Slave unit in a wireless flash group.
• Lightweight and portable: up to 200Ws, is to 3 times as powerful as camera flashes ( 600EX ), and the size is almost the same.
• Changeable flash head: Speedlite flash head: Portability, comes with multiple sets of optical glass, even illumination and modeling lamp (LED). Bare bulb flash head: Lighting out with 360-degree angles, all lighting accessories fit for bare bulb flashes from most brands.
• High-quality VA Panel: with clear and convenient operation.
• Built-in 2.4G wireless transmission: with all-in-one functions and 100 meters of further transmission
• Studio quality light: up to 200Ws, GN 60 (m ISO 100, with bare bulb flash head) / GN52 (Speedlite flash head).
• Battery pack : Large-capacity power supply (lithium, 14.4V/2900mAh), 0.01- 2.1s recycling, and 500 full power flashes.
• Wireless control: With built-in Godox 2.4G wireless X system to achieve TTL control. Godox FT-16 flash trigger can also be used to wirelessly adjust the flash power level and trigger the flash. AD200 has a 3.5mm sync cord jack to achieve various sync triggering modes.
• Power adjusts from full power to 1/128 in 1/3 stop increments.
• Stable color temperature at 5600±200K over the entire power range.
• 1/8000s high-speed sync flash, high-speed sync triggering.
• The powerful and portable AD200 meets the demands of freelance commercial photographers, photojournalists, wedding and beach portraiture shooters, event and backpack photographers, photograph enthusiasts, etc.

Warning

• Always keep this product dry. Do not use it in rain or damp conditions.
• Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.
• Keep out of reach of children.
• Stop using this product if it breaks open due to extrusion, falling, or a strong hit. Otherwise, an electric shock may occur if you touch the electronic parts inside it.
• Do not fire the flash directly into the eyes (especially those of babies) within short distances. Otherwise, visual impairment may occur.
• Do not use the flash unit in the presence of flammable gases, chemicals, and other similar materials. In certain circumstances, these materials may be sensitive to the strong light emitting from this flash unit, and fire or electromagnetic interference may result.
• Do not leave or store the flash unit if the ambient temperature reads over 50°C. Otherwise, the electronic parts may be damaged.
• Turn off the flash unit immediately in the event of malfunction.

Name of Parts

Body:

Flash Head

Speedlite flash head:

VA Panel

1. VA Panel
2. M Manual Flash
3. Multi Flash
4. Radio Transmission Shooting

S1/S2

Included Accessories

1. Speedlite flash head
2. Bare bulb flash head
3. AD-E holder*1
4. Battery charger*1
5. Lithium battery pack*1
6. Protecting bag*1
7. Instruction manual*1

Separately Sold Accessories

The product can be used in combination with the following accessories sold separately, to achieve best photography effects: X1 Wireless Flash Trigger, FT-16 Remote Control, Barn door with 4 wings, Softbox, Beauty Dish, Fold up umbrella, Snoots, Light stand, etc.

Attaching Bare bulb flash head

1. Remove the reflector or other accessories from the flash head.
2. Match the red dot on the base of the flash tube with the red dot in the Tube Socket (4). Push the flash tube in until it is securely seated into the socket.

Lithium Battery

Features

1. This flash unit uses a Li-ion polymer battery which has a long runtime. The available charge-and-discharge times are 500.
2. It is reliably safe. The inner circuit is against overcharge, over-discharge, overcurrent, and short circuit.
3. Take only 4 hours to fully charge the battery by using the standard battery charger.

Cautions:

• Do not short circuit.
• Do not be exposed to rain or immerse in water. This battery is not waterproof.
• Keep out of reach of children.
• No over 24 hours’ continuous charging.
• Store in dry, cool, ventilated places.
• Do not put aside or into the fire.
• Dead batteries should be disposed of according to local regulations.
• Long time not to use, please charge it to 60% and then place.
• If the battery has ceased use for over 3 months, please make a full recharge.
• Please charge the battery to approx. 60% before being placed for a long time.
• It is recommended to replace with a brand-new battery after over 500 charge-and-discharge times or three-year usage of the battery.

Battery Level Indication

Make sure the battery pack is securely loaded in the flash. Check the battery level indication on the VA Panel to see the remaining battery level.

will auto-power off in 1 minute.
Note: Please recharge the battery as soon as possible (within 10 days).
Then, the battery can be used or be placed for a long period.

Power Management

• ON/OFF Power Switch controls the on/off of the flash unit, turn off the power pack if the flash unit will not be used for an extended period.
• The product design of the power supply with automatic hibernation feature, When unattended operation for a long time (approx. 30/60/90 minutes ), the flash will automatically standby.
• C.Fn Disabling Auto Power standby function is recommended when the flash is used off the camera. (C.Fn-F3)

Modeling Lamp

• With only the Speedlite flash head having modeling lamp function, it will automatically turn off after 30 minutes. Short pressing the modeling lamp button will control the modeling lamp turn on or off.

Wireless Flash Mode

AD200 can only be set as a slave unit (receiver end). Long press the wireless selection button for 2 seconds to switch the radio transmission function.

Flash Mode — TTL Autoflash

• This flash has three flash modes: TTL, Manual (M), and Multi (Stroboscopic). In TTL mode, the camera and the flash will work together to calculate the correct exposure for the subject and the background. In this mode, multiple TTL functions are available: FEC, FEB, FEL, HSS, second curtain sync, modeling flash, and control with the camera’s menu screen.
• Press < > Mode Selection Button and three flash modes will display on the VA Panel one by one with each pressing.

TTL Mode

• Press < MODE/ > Mode Selection Button to enter TTL mode. The VA Panel is displayed < TTL >.

FEC: Flash Exposure Compensation

• With the FEC function, this flash can adjust from -3 to +3 in 1/3rd of stops. It is useful in situations where minor adjustments of the TTL system are needed based on the environment.

Setting FEC:

1. Press the Function Button and the flash exposure compensation amount will be highlighted on the VA Panel.
2. Set the flash exposure compensation amount.
   • Turn the Select Dial to set the amount.
   • “0.3” means 1/3 step,
   • 0.7” means 2/3 step.
   • To cancel the flash exposure compensation, set the amount to “+0”.
3. Press the < SET > button again to confirm the setting.

High-Speed Sync

High-speed sync (FP flash) enables the flash to synchronize with all camera shutter speeds. This is convenient when you want to use aperture priority for fill-flash portraits.

1. Long Press the Function Button for 2 seconds so that is displayed.
2. Please use the X1 series transmitter to trigger.

• With high-speed sync, the faster the shutter speed, the shorter the effective flash range.
• The multi-flash mode cannot be set in high-speed sync mode.
• Over-temperature protection may be activated after 20 consecutive high-speed sync flashes.

Flash Mode — M: Manual Flash

The flash output is adjustable from 1/1 full power to 1/128th power in 1/3rd stop increments. To obtain a correct flash exposure, use a hand-held flash meter to determine the required flash output.

1. Press the button so that < M > is displayed.
2. Turn the Select Dial to choose a desired flash output amount.
3. Press the < SET > button again to confirm the setting.

Flash Output Range
The following table makes it easier to see how the stop changes in terms of f/stop when you increase or decrease the flash output. For example, when you decrease the flash output to 1/2, 1/2-0.3, or 1/2-0.7, and then increase the flash output to more than 1/2, 1/2+0.3, 1/2+0.7, and 1/1 will be displayed.
Figures displayed when reducing flash output level→

Figures displayed when increasing the flash output level

Optic S1 Secondary Unit Setting

• In M manual flash mode, Long press the < C.Fn > button for 2 seconds to enter C.FN-F2 to choose the S1 function, so that this flash can function as an optic S1 secondary flash with the optic sensor.
• With this function, the flash will fire synchronously when the main flash fires, the same effect as that by the use of radio triggers. This helps create multiple lighting effects.

Optic S2 Secondary Unit Setting

• Long press <C.Fn> button for 2 seconds to enter C.FN-F2 to choose the S2 function, so that this flash can also function as an optic S2 secondary flash with the optic sensor in M manual flash mode.
• This is useful when cameras have a pre-flash function. With this function, the flash will ignore a single “preflash” from the main flash and will only fire in response to the second, actual flash from the main unit.
• S1 and S2 optic triggering is only available in M manual flash mode.

Display Flash Duration

• Flash duration refers to the length of time that from the flash’s firing to reach the half peak at maximum. The half peak at maximum is usually expressed as t=0.5. To provide the photographer with more concrete data, this product adopts t=0.1. The difference between t=0.5 and t=0.1 is shown in the following picture.

Display Flash Duration Operation

1. Long press the C.Fn button for 2 seconds to enter the C.FN function.
2. Adjust the Select Dial to F6, the t0.1 icon will be displayed on the VA Panel.
3. Press button to enter the adjustment condition.
4. Turn the Select Dial to choose the ON/OFF.

• The flash duration will only be displayed on the VA Panel in M mode.

Flash Mode — Multi: Stroboscopic Flash

• With stroboscopic flash, a rapid series of flashes is fired. It can be used to capture multiple images of a moving subject in a single photograph.
• You can set the firing frequency (number of flashes per sec. expressed as Hz), the number of flashes, and the flash output.

1. Press the button so that is displayed.
2. Turn the Select Dial to choose the desired flash output.
3. Set the flash frequency and flash 3times.

• Press the < SET > button to select the flash frequency. Turn the Select Dial to set the number.
• Press the < SET > button to select the flash times. Turn the Select Dial to set the number.
• After finishing the setting, press the button and all the settings will be displayed.

Calculating the Shutter Speed

• During stroboscopic flash, the shutter remains open until the firing stops. Use the formula below to calculate the shutter speed and set it with the camera.

Number of Flashes / Flash Frequency = Shutter Speed

• For example, if the number of flashes is 10 and the firing frequency is 5 Hz, the shutter speed should be at least 2 seconds.
• To avoid overheating and deteriorating the flash head, do not use stroboscopic flash more than 10 times in succession. After 10 times, allow the camera flash to rest for at least 15 minutes. If you try to use the stroboscopic flash more than 10 times in succession, the firing might stop automatically to protect the flash head. If this happens, allow at least 15 minutes rest for the camera to flash.
• Stroboscopic flash is most effective with a highly reflective subject against a dark background.
• Using a tripod and a remote control is recommended.
• A flash output of 1/1 and 1/2 cannot be set for stroboscopic flash.
• Stroboscopic flash can be used with“buLb”.
• If the number of flashes is displayed as “–”, the firing will continue until the shutter closes or the battery is exhausted. The number of flashes will be limited as shown by the following table.

Maximum Stroboscopic Flashes:

Flash Hz Output| 1| 2| 3| 4| 5| 6- 7| 8- 9| 10| 11| 12- 14| 15- 19| 20- 50| 60- 99
---|---|---|---|---|---|---|---|---|---|---|---|---|---
1/4| 7| 6| 5| 4| 4| 3| 3| 2| 2| 2| 2| 2| 2
1/8| 14| 14| 12| 10| 8| 6| 5| 4| 4| 4| 4| 4| 4
1/16| 30| 30| 30| 20| 20| 20| 10| 8| 8| 8| 8| 8| 8
1/32| 60| 60| 60| 50| 50| 40| 30| 20| 20| 20| 18| 16| 12
1/64| 90| 90| 90| 80| 80| 70| 60| 50| 40| 40| 35| 30| 20
1/128| 90| 90| 90| 90| 90| 90| 80| 70| 70| 60| 50| 40| 40

Wireless Flash Shooting

• Ad200 adopts Godox 2.4G wireless X system, which has good compatibility with other products of our company. As a slave unit, AD200 is automatically compatible with Canon/ Nikon/ Sony TTL system according to the master unit. Nikon cameras (use X1T-N), Canon cameras (use X1T-C) and Sony cameras (use X1T-S) can use one or more AD200-TTL flashes simultaneously.

1. Wireless Settings
   • MODE/Long press < > button for 2 seconds to switch wireless function ON/ OFF.
   • Turn the wireless function on, the < > icon will be displayed on the VA Panel.
   • When using the FT-16 remote control or others trigger, please turn off the wireless function.
2. Setting the Communication Channel
   • If there are other wireless flash systems nearby, you can change the channel IDs to prevent signal interference. The channel IDs of the master unit and the slave unit(s) must be set to the same.
   • Long press the <GR/CH> Button for 2 seconds, so that the icon will be displayed on the VA Panel.
   • Turn the Select Dial to choose a channel ID from 1 to 32.
   • Press the button to confirm.
3. Setting the Communication Group
   • Short press the < GR/CH > button to choose group ID from A to E.

• Positioning and Operation Range (Example of wireless flash shooting)
• Autoflash Shooting with One Slave Unit
• Use the supplied stand to position the slave unit.
• Before shooting, perform a test flash and test shooting.
• The transmission distance might be shorter depending on the conditions such as the positioning of the slave units, the surrounding environment, and weather conditions.

Wireless Multiple Flash Shooting

• You can divide the slave units into two or three groups and perform TTL autoflash while changing the flash ratio (factor). In addition, you can set and shoot with a different flash mode for each firing group, for up to 5 groups.
• Auto Shooting with Two Slave Groups
• Auto Shooting with Three Slave Groups
• When using the AD200 and Godox X1 series trigger together， the X1 can control the flash function such as:
• Flash Mode : TTL, M, Multi
• Control the power level
• Sync Mode: First-curtain sync, second-curtain sync, and High-speed sync
• Modeling Lamp turn on or off
• Beeper turn on or off

C.Fn: Setting Custom Functions

The following table lists the available and unavailable custom functions of this flash.

Custom Function Signs| Functions| Setting Signs| Settings & Descriptions| Restrictions
---|---|---|---|---
F1| Beeper| ON| ON| NO
OFF| OFF
F2| S1/S2 mode selection| OFF| OFF| M mode
S1| S1 mode
S2| S2 mode
F3| Auto standby| OFF| OFF| NO
30 min| Auto standby without

any operation

60 min
90 min
F4| Delay flash| OFF, 0.01~30s| Can be triggered as the second curtain| M /Multi-mode
F5| Mask| OFF| OFF| M mode

N1

| ON: Trigger 2 times for 1 cycle,

1st flash of the trigger.

N2

| ON: Trigger 2 times for 1 cycle,

2nd flash of the trigger.

F6| t0.1 display| ON| Display| M mode
OFF| Not display

1. Long press < /C.Fn> button for 2 seconds to enter the C.Fn menu.
2. Select the custom function No.
   • Turn the Selection Dial to select the custom function No.
3. Change the setting
   • Press the button and the Setting No. blinks.
   • Turn the Select Dial to set the desired number. Press the button will confirm the settings.
4. Exit C.Fn menu
   • MODE/Press < > button to exit.

Other Applications

Wireless Control Function

• The flash unit is built in with a Wireless Control Port so that you can wirelessly adjust the power level of the flash and the flash triggering.
• To control the flash wirelessly, you need an FT-16 remote control set (on-camera and on-flash). Insert its receive end into the Wireless Control Port on the flash and insert the transmit end into the camera hot shoe. Settings made on the hotshoe-mounted transmit and receive ends will be wirelessly communicated to the flash. Then you can press the camera shutter release button to trigger the flash. You can also hold the transmit end at hand to control your off-camera flash.
• For full instructions on the use of FT series remote control, see its user manual.
• Turn off the AD200 wireless function.

Sync Triggering

• The Sync Cord Jack is a Φ3.5mm plug. Insert a trigger plug here and the flash will be fired synchronously with the camera shutter.

Protection Function

1. Over-Temperature Protection

• To avoid overheating and deteriorating the flash head, do not fire more than 40 continuous flashes in fast succession at 1/1 full power. After 40 continuous flashes, allow a rest time of at least 10 minutes.
• If you fire more than 40 continuous flashes and then fire more flashes in short intervals, the inner over-temperature protection function may be activated and make the recycling time over 10 seconds. If this occurs, allow a rest time of about 10 minutes, and the flash unit will then return to normal.
• When the over-temperature protection is started, is shown on the AV display.

Number of flashes that will activate over-temperature protection:

1/128(+0.3,+0.7)

Number of flashes that will activate over-temperature protection in high- speed sync triggering mode:

1/64(+0.3,+0.7);
1/128(+0.3,+0.7);

Other Protections

The system provides real-time protection to secure the device and your safety. The following list prompts for your reference:

Please restart the flash unit. If the problem still exists, please send this product to a maintenance center.
E2| The system gets excessive heat. Please allow a rest time of 10 minutes.
E3| The voltage on two outlets of the flash tube is too high. Please send this product to a maintenance center.
E9| Some errors occurred during the upgrading process. Please use the correct firmware upgrade method.

Technical Data

Canon & Sony)
Flash Mode| Wireless off| M/Multi
Slave unit of radio transmission| TTL/ M/Multi
Compatible Cameras under Radio Transmission (as slave unit)| Nikon cameras (X1N as a master unit)
Canon EOS cameras (X1C as a master unit)
Sony cameras (X1S as a master unit)
Guide No. (1/1 Output)| Speedlite flash head: 52 (m ISO 100, @35mm)
Bare bulb flash head: 60 (m ISO 100, with the AD-S2 standard reflector, @28mm)
Flash Duration t.01 (approx.)| Speedlite flash head: 1/220 to 1/13000 seconds
Bare bulb flash head: 1/220 to 1/11300 seconds
POWER| 200W
Power Output| 8 steps: 1/128~1/1
Stroboscopic Flash| Provided (up to 90 times, 99Hz)
Flash Exposure Compensation (FEC)| Manual. FEB: ±3 stops in 1/3 stop increments.
Sync mode| High-speed sync (up to 1/8000 seconds), first-curtain sync, and second-curtain sync
Delay Flash| 0.01~30 seconds
Mask| √
Beeper| √
Modeling Lamp (LED)| √
Optic Slave Flash| S1/S2
Flash Duration Indication| √
Wireless Flash (2.4G transmission)
Wireless flash function| Slave, Off
Controllable slave groups| 5 (A, B, C, D, and E)
Transmission range (approx.)| 100m
Channels| 32 (1~32)
Power Supply
Power Supply| Lithium battery pack (14.4V/2900mAh)
Full Power Flashes| 500
Recycle Time| Approx. 0.01-2.1s
Battery Indicator| √
Power Indication| Power standby automatically after approx. 30 minutes of idle operation.
Sync Triggering Mode| 3.5mm sync line, Wireless control port
Color Temperature| 5600±200k
Dimensions
Dimension| 168x75x50mm (flash head not included)
Net Weight| 560g (flash head & battery not included)

Firmware Upgrade

• This flash supports firmware upgrades through the USB port. Update information will be released on our official website.
• The USB connection line is not included in this product. The USB port is a standard Micro USB socket. A Common USB connection line is applicable.
• Note: Press the button and turn the flash on, the firmware update version (e.g. Version 1.0 will read U-1.0) will be displayed on the panel.

Maintenance

• Shut down the device immediately should abnormal operation be detected.
• Avoid sudden impacts and the product should be deducted regularly.
• It is normal for the flash tube to be warm when in use. Avoid continuous flashes if unnecessary.
• Maintenance of the flash must be performed by our authorized maintenance department which can provide original accessories.
• This product, except for consumables e.g. flash tubes, is supported with a one-year warranty.
• Unauthorized service will void the warranty.
• If the product has failures or was wetted, do not use it until it is repaired by professionals.
• Changes made to the specifications or designs may not be reflected in this manual.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warranty

Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe keep it. Thank you!

Address
Seller Information| Name
Contact Number
Address
Date of Sale
Note:

Note: This form shall be sealed by the seller.

Applicable Products

• The document applies to the products listed on the Product Maintenance information (see below for further information). Other products or accessories (e.g. promotional items, giveaways, and additional accessories attached, etc.) are not included in this warranty scope.

Warranty Period

• The warranty period of products and accessories is implemented according to the relevant Product maintenance information.
• The warranty period is calculated from the day(purchase date) when the product is bought for the first time, And the purchase date is considered as the date registered on the warranty card when buying the product.

How to Get the Maintenance Service

• If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide a valid warranty card. If you cannot provide a valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

Inapplicable Cases

• The guarantee and service offered by this document are not applicable in the following cases:
• The product or accessory has expired its warranty period; Breakage or damage caused by inappropriate usage, maintenance, or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc. Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition, and detachment;
• The original identifying information of the product or accessory is modified, alternated, or removed; No valid warranty card;
• Breakage or damage caused by using illegally authorized, nonstandard, or non-public released software;
• Breakage or damage caused by force majeure or accident.
• Breakage or damage that could not be attributed to the product itself. Once these situations are met, you should seek solutions from the related responsible parties and Godox assumes no responsibility.
• The damage caused by parts, accessories, and software that are beyond the warranty period or scope is not included in our maintenance scope.
• The normal discoloration, abrasion, and consumption are not the breakage within the maintenance scope.

Maintenance and Service Support Information

The warranty period and service types of products are implemented according to the following Product Maintenance Information:

site
Battery| 3| The customer sends the product to the designated site
Electrical parts e.g.battery charger, power cord, sync cable, etc.| 12| The customer sends the product to the designated site
Other Items| Flash tube, modeling lamp, lamp body, lamp cover, locking device, package, etc.| No| Without warranty

• Godox After-sale Service Call 0755-29609320-8062

• GODOX Photo Equipment Co., Ltd.

• Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Baoan District, Shenzhen, China

• Tel: +86-755-29609320(8062)

• Fax: +86-755-25723423
  E-mail:godox@godox.com

• Made in China

• godox.com

Documents / Resources

| GODOX AD200 TTL 2.4G HSS 18000s Pocket Flash Light [pdf] Instruction Manual
AD200 TTL 2.4G HSS 18000s Pocket Flash Light, AD200, TTL 2.4G HSS 18000s Pocket Flash Light, HSS 18000s Pocket Flash Light, 18000s Pocket Flash Light, Pocket Flash Light, Flash Light, Light
---|---

References

• GODOX Photo Equipment Co.,Ltd.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>