ERAY C3 LED Work Light with Rechargeable Battery User Manual
- June 14, 2024
- ERAY
Table of Contents
ERAY C3 LED Work Light with Rechargeable Battery
After-sales Email: service@erayvip.com
Thanks for purchasing our product! Please read carefully before use, and keep
the user manual in a safe place for further reference.
Portable LED Work Light
Specification
Package Includes
- 1 LED Work Light
- 1 USB Cable
- 1 User Manual
Light Modes & Adjustable Brightness
- Short press the power button to switch 5 light modes in sequence: warm white light -weak warm white light – white light – warm light – SOS strobe light.
- Stepless Dimming: In the first four modes, long press the power button to adjust the brightness from strong to weak; release the hand and then do it again, the brightness from weak to strong.
Note: Please charge the work tamp with the adapter (5V/ 2A) before using it for the first time.
Function Instructions
-
Type-C Input (5V/ 2A)
Charge the work light with a regular charger -
USB Output (5V/ 1A)
Charge your mobile phone. (When the power is lower than 25%, it cannot charge the phone in case of protecting the battery.) -
Battery Indicators
-
The indicator lights respectively represent 25%, 50%, 75%, and 100% battery status. (The indicators are only for reference, and not that precise, please subject to the actual lighting time.)
-
The indicator light flashes when the solar panel absorbs sunlight, which indicates that the solar power is being converted into electric energy. The electric energy is proportional to the intensity of the sunlight.
-
Charging Methods
-
USB charging: plug-in power via a USB cable to charge the light.
-
Solar charging: suitable for outdoor emergency charging, not recommended as a daily charge.
-
Built-in Power Bank
Equipped with a lithium battery and USB output port, the work light can be used as a power bank to charge cellphones, tablets,s and other electronic devices.
Frequently Asked Questions
Q1: Is this work light waterproof?
A 1: The work light can be used in light rain, but please note that the USB
interface is not waterproof, the light will be damaged if water enters the
inside of the light.
Q2: How do you check the battery power of the light?
A2: 4 indicator lights help you roughly check the battery power. Cover the
solar panel and turn on the light switch. When the indicator stops flashing,
you can easily read the battery power referring to the instructions of the
indicators.
Q3: Can the battery be replaced?
A3: The work light has a built-in rechargeable lithium battery. Please do not
replace ii easily for non-professionals.
Q4: How do you protect the rechargeable batteries and extend battery
life?
A4: Use a 5V/ 2A charger to charge the work light;
When the battery power of the work light is less than 25%, it cannot output
current, so it cannot charge the mobile phone.
Important: When the battery is less than 25%, the solar charging function
cannot be used, and a 5V/ 2A charger and USB cable are required to charge the
lamp.
When the battery power of the light is exhausted, the indicator light and the
bulb will no longer go on, you can charge it for about 30 minutes with a 5V/
2A charger.
Note : Please charge it every 3-6 months, if not used for a long time.
QS: What should I pay attention to when using the solar work light
outdoors?
A5: Keep away from fire and high temperatures, and avoid rain and long-term
sun exposure.
WARM TIPS
- This product emits ultra-bright light, please do not look directly at the light source.
- Please do not randomly disassemble, repair, process, or modify the product, or use it for any other purpose.
- Please keep the product away from places with high temperature, high humidity, lots of dust or oil smoke, etc.
- Keep the product and its accessories away from kids.
- The built-in battery will discharge spontaneously, so please charge the product before use or after a long period of non-use.