HATHEVER PB11C Dog Potty Training Doorbell User Manual
- July 27, 2024
- HATHEVER
Table of Contents
HATHEVER PB11C Dog Potty Training Doorbell
Product Information
Specifications
- Model: PB-11C/PB-21C/PB-22C/PB-31C
- Receiver working voltage: Not specified
- Sound pressure level: 110 dB
- Receiver AC power consumption: < 0.5 W (Standby mode)
- Working frequency: 433 MHz
- Transmitter battery type: 12V 23A battery
- Operating temperature: Not specified
- Battery lifetime: Up to 3 years
Product Usage Instructions
Installation
- Step 1: Take off the screw with a screwdriver and open the back cover of the transmitter.
- Step 2: Replace the battery, align its position, and attach the front cover. Then, tighten the screws.
Note:
The battery is pre-installed in the transmitter. Peel off the insulating film
on the button cell to activate the transmitter.
Transmitter Installation
Peel off the outer side of the tape on the back of the transmitter. Next,
firmly press the transmitter onto the desired location on the wall or door for
30 seconds.
Note:
The transmitter is attached using Velcro, allowing for easy removal from the
wall or door to replace the battery without damaging the surface.
Operating Instructions
Pairing Method
- Plug the receiver into a power socket.
- Press the chime’s music button to select the music you want.
- Press and hold the pair button/mode button on the receiver for 3 seconds until the chime rings quickly dingdong twice.
- Press the transmitter you want to pair within 30 seconds, and the receiver will ring to indicate the pairing is complete; if not, please press the transmitter again until the chime rings.
To add more buttons/receivers, simply follow the above steps.
Note:
Press and hold the chime’s pair button/mode button.
FAQ
Q: What should I do if the transmitter is not pre-programmed to operate with the doorbell?
A: You can refer to the pairing method provided in the manual to pair the transmitter with the receiver.
Q: How long does the transmitter battery last?
A: The transmitter battery can last up to 3 years under normal usage.
Q: Can I add more buttons or receivers to the system?
A: Yes, you can add more buttons or receivers by following the pairing method outlined in the manual.
For further assistance, contact customer service at hathever@126.com.
Model:
PB-11C/PB-21C/PB-22C/PB-31C.
Thank you for purchasing this product. To ensure proper use and trouble-free operation, please read this manual carefully and store it in a safe place for future reference.
Package Contents
Content will vary according to your kit
The push button supplied with this kit is pre-programmed to operate with the
doorbell. If it is not, see “Pairing method”.
Overview
Track List
Technical Specifications
- Receiver working voltage AC 110 V – 220 V
- Sound pressure level ≤ 110 dB
- Receiver AC power consumption < 0.5 W (Standby mode)
- Working frequency 433 MHz
- Transmitter battery type 12V 23A battery
- Operating temperature -20 °C – 60 °C
- Battery lifetime Up to 3 years
Features
- Easily activate the dog training bell with a slight touch on the nose or paw.
- Enjoy 32 melodies with rich and crisp sound from the built-in stereo speaker.
- Use the bell from almost anywhere with a 300 m wireless distance range (depending on the environment).
- The IP65 weather-proof transmitter is suitable for various outdoor environments.
- Set different ring tones for each transmitter to identify which doorbell is being rung.
- The memory function remembers your previous melody and volume level for added convenience.
Installation
Transmitter battery replacement
- Step 1: Take off the screw with a screwdriver and open the back cover.
- Step 2: Replace the battery, align its position, and attach the front cover. Then, tighten the screws.
Note:
The battery is pre-installed in the transmitter. Peel off the insulating film
on the button cell to activate the transmitter.
Transmitter installation
Peel off the outer side of the tape on the back of the transmitter. Next,
firmly press the transmitter onto the desired location on the wall or door for
30 seconds.
Note:
The transmitter is attached using Velcro, allowing for easy removal from the
wall or door to replace the battery without damaging the surface.
Operating Instructions
Pairing method
- Plug the receiver into a power socket.
- Press the chime’s “music button” to select the music you want.
- Press and hold the “pair button/mode button” on the receiver for 3 seconds, until the chime rings “quick dingdong” twice.
- Press the transmitter which you want to pair within 30s and the receiver will ring to indicate the paring is complete; if not, please press the transmitter again, until the chime rings.
To add more buttons/receivers, simply follow the above steps.
Note:
- Press and hold the chime’s “pair button/mode button” for about 10 s, until the chime rings “dingdong” twice, all the pairing code will be deleted completely.
- To change the melody, follow step 2 through step 4 for operating the doorbell.
Notification mode selection
This dog bell has four notification modes: 1) Ring only; 2) Light flash only;
3) Ring and light flash; 4) Ring and light on. Press the “pair button/mode
button” to choose the mode you want.
Volume adjustment
There are four volume levels. Press the “volume button” to select prefer
volume level. When the volume reaches its minimum, press the button again to
return to the maximum volume.
Notice
- Please do not place transmitters in areas close to metals.
- The working distance varies if there are blockages within the environment.
- Use this product properly to prolong its lifespan.
- To prevent destroying internal electronic components, never repair the interior circuit.
Customer service email:
hathever@126.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>