Tuya WD61 Water Leak Detector User Manual

Tuya WD61 Water Leak Detector

At a Glance

Water Leak Detector is a device that sounds an alarm once detecting water drip or leak.

• Indicator: For reflecting the status of the detector
• Sensor: Detecting Dripping
• Alarm: Alarm Sound
• Test Key: Pairing, testing, pausing alerts
• Probe: Detecting water seepage
• Batteries: AAA battery*2

Installing your Device

1. Place the sensor of the water leak detector in the place where you need to strengthen the water level detection.

Using your device

1. Detecting Dripping.
   Note:

   • Two detection sensors of parallel lines will immediately alarm when they detect water, and two sensors of diagonal lines will not alarm when they detect water at the bottom of detector.
   • The device is still not dehydrated after the detector alarm is over,then the flood detector will continue to alarm every 15s until the dehydration or press the button to cancel the alarm,it will not make a regular alarm prompt if it’s still immersed in water after 24 hours.

2. Removing the alarm.

3. Low power prompt.

Charging the batteries

1. Remove the cover on the back to access the battery compartment.
2. Remove the used batteries and replace them with equivalent models(2 x AAA batteries).
3. Put the cover back on the test your detector.

Customer Service
Warranty: 12-month Limited Warranty

Battery recycling
Do not dispose of used batteries with your household waste,but in the recycling bins provided.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>