BroadLink RM mini 3 Wi-Fi Universal Remote User Guide

: June 14, 2024
: BroadLink

Table of Contents

BroadLink RM mini 3 Wi-Fi Universal Remote
FAQs
FCC Radiation Exposure Statement
Overview
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BroadLink RM mini 3 Wi-Fi Universal Remote

Indications

Status	Indication
Flashes quickly (2-3 times / sec)	Device is in smart configuration mode

(waiting to be added).
Flashes quickly and off alternatively| Device is in AP configuration mode (waiting to be added)
Flashes from quickly to slowly then off| Device is being configured and then added to network.
Flashes slowly (once / sec)| Device is failed to connect network
Flash once| IR signal is sent

BroadLink-RM-mini-3-WiFi-Universal-Remote-IMAGE-1

Reset for Smart Configuration
- Press and hold the reset (on/off) button using a needle for 6s until the LED flashes quickly. DO NOT hold longer than 10s, otherwise it will go to AP configuration mode.
Reset for AP Configuration
- In any conditions, press and hold the reset (on/off) button using a needle for 10s until the LED flashes quickly and off alternatively.

FAQs

What should I do when I fail to configure the device?
Make sure your network condition is fully compliant with requirement stated in “Prepare App”.
Make sure there are not too many devices connected to router (normal home router can hold no more than 15 devices including phones, computers, smart TVs…)
Try AP configuration if it is needed.
Will others find my devices?
Only the user added to your home member and assigned with permission can access to authorized devices.

Important Notices

For indoor use in dry environment only.
Keep clear space with IR appliances.

FCC Radiation Exposure Statement

Contains FCC ID: 2ACDZ-RMMINI3-RM
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions :
This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
- Web: www.ibroadlink.com
- e-mail: support@ibroadlink.com

Overview

Unit: mm

Prepare App

Download “BroadLink” App from the App Store or Google Play by searching or scanning the QR code.
Open the App, sign up an account and follow the wizard to set up your home for first use.

NOTE:

Make sure your phone is connected to 2.4GHz Wi-Fi network before adding device (5GHz is not supported).
The Wi-Fi password should contain no more than 32 characters and no special characters which are not available on standard keyboard layout.

Add Device

BroadLink-RM-mini-3-WiFi-Universal-Remote-IMAGE-5

Power on the device. If it is in first time use, it will be in smart configuration mode automatically, otherwise you may need to reset it.
When the device is in smart configuration mode, follow the wizard in App to add device, name it and assign it to a room.
If you have difficulties to add device in smart configuration mode, please refer to Indications to try AP configuration.
In device page, tap “Add remote” and follow the wizard to add a virtual remote for your IR or RF device.
If any button is not functional, please select “Learn buttons” from menu in remote panel and tap the button to start learning until the button is tested working.

Works with Google/Alexa/ IFTTT

Make sure the device can be remotely controlled from external networks (e.g. 4G).
In Google/Alexa/IFTTT App, enable the skill/service named “BroadLink”, link account and discover devices.
NOTE:
You need to discover devices again in Alexa App or link account again in Google App if the device has been reset.
The supported regions, languages and voice control commands are subject to changes due to upgrading on skills/services and policies of third-party platforms.
You can find available voice control commands in App for supported devices.