ALLSMARTLIFE A4 LED Flat Panel Light Surface Mount User Manual

ALLSMARTLIFE A4 LED Flat Panel Light Surface Mount

Important Information

Thank you for choosing our product. Please read the user manual carefully.
There are detailed installation steps that will better help you use the product.

Summary

Scope of Application: Home, Office, Kitchen, living room, Hallway etc.

Performance Features:

1. The panel light has three power options: 24W, 30W, and 40W, allowing you to set your preferred wattage. It is a high-brightness lighting equipment with super bright 480 LED 120LM/W lamp beads, suitable for home use.
2. The panel light has five CCT options (3000K/3800K/4500K/5200K/6000K), ensuring you can choose the correct color temperature.
3. The high-quality LED light source saves 85% electricity compared to ordinary halogen lamps, making it an energy-efficient, green, and environmentally friendly option.
4. The faceplate light has a professional optical design that provides soft and uniform lighting. There is no flicker, glare, or noise, offering better eye protection.
5. Wattage: 24/30/40W, Voltage: 110-130V, Dimming Details: Triac Dimming,
   Moisture Rating: Damp, Housing Material: Aluminum, Warranty: 5 Years.

Warning
Using triac dimmers will be perfectly compatible.
Please professional electrician to install the lamp.
Please cut off the power supply before installation and maintenance to avoid electric shock.

• Please do not install the lamp on a sloping ceiling. Incorrect installation methods may easily cause fall and electric shock accidents.
• Please do not install the lamp in a high-temperature or long-term humid environment, as it may easily shorten the service life of the lamp.
• Please cut off the power quickly when the lamp has abnormal conditions, such as flickering or not lighting.
• Please note that the voltage cannot exceed the range of use. Long-term use of high voltage may easily cause damage to the lamp.
• Please do not use 0-10V, resistor, or smart dimmers that are incompatible with it.
• Do not install, repair, or inspect light fixtures unless you are a qualified electrician to avoid other hazards.
• It is not recommended to replace the LED light source driver. If you need to replace it, please contact a professional electrician.

Wire Connection Diagram

Remark:

1. Use the terminal block to connect or disconnect wires.
2. Peel off 0.3-0.4 inches of the wire insulation.
   Ensure that the copper wire is not exposed after connecting to the terminal block.

Remarks:

We recommend using a LUTRON dimmer switch for optimal compatibility.

If you encounter any of the following issues please contact us via email. We promise to respond within 12 hours:

1. Need additional installation instructions.
2. Product failure and require after-sales service.
3. Need to initiate a return/exchange request.
4. Need additional product information.
   Our customer service email address: [email protected]

Installation Procedures

A: Recessed Mounted

1. Please cut off or turn off the power and take out the ceiling before installation.

2. Please connect the power cord.

3. Tilt the fixture and insert it through the gap.

4. Turn on the power.

B: Suspension Mounted

1. Install the metal bolts on the ceiling.

2. Pass the lanyard through the metal bolt, and finally fix it with small screws.

3. Put the hook through the fixing ring on the back of the object.

C: Surface Mounted

1. Fix the four corners of the back mounting plate with screws and install it on the ceiling.

2. Please put the hook through the fixing ring on the back of the luminaire.

3. Place the luminaire flush on the ceiling, aligning the back plate with the snap.

4. Finish the installation and connect the power supply.

Packing list

Warranty

• 5 years from purchase date.

Product Certificate

The product passes checkout is qualified, Allow to leave the factory.

Surveyor: QC06

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>