Keychron Q6 Pro Wireless Mechanical Keyboard User Manual

: June 14, 2024
: Keychron

Table of Contents

Keychron Q6 Pro Wireless Mechanical Keyboard
Fully Assembled Version
Barebone Version
Quick Start Guide
Warranty
Factory Reset
Q6 PRO BLUETOOTH MECHANICAL KEYBOARD SPECIFICATIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Keychron Q6 Pro Wireless Mechanical Keyboard

Fully Assembled Version

Keyboard

1x Fully Assembled Keyboard Including
1x Aluminum Case
1x PCB
1x PC Plate
1x Sound Absorbing Foam
1x Case Foam
16x Gaskets (12 Installed and 4 in the Box)
8 Sets x Stabilizers
1 Set x Keycaps (PBT Double-shot)
1 Set x Switches

Cable

1x Type-C to Type-C Cable
1x Type-A to Type-C Adapter

Tools

1x Switch Puller
1x Keycap Puller
1x Screwdriver
1x Hex Key

Barebone Version

Keyboard Kit

1x Keyboard Kit (Without Keycaps & Switches) Including
1x Aluminum Case
1xPCB
1x PC Plate
1x Sound Absorbing Foam
1x Case Foam
16x Gaskets (12 Installed and 4 in the Box)
8 Sets x Stabilizers

Cable

1x Type-C to Type-C Cable
1x Type-A to Type-C Adapter

Tools

1x Switch Puller
1x Keycap Puller
1x Screwdriver
1x Hex Key

Quick Start Guide

If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps.

Mac/ Windows

Connect Bluetooth
Connect Cable
The VIA Key Remapping Software
Please visit caniusevia.com to download the latest VIA software to remap the keys.
If the VIA software cannot recognize your keyboard, please reach out to our support to get the instruction. (VIA only works when the keyboard is connected by wire to the computer.)
The Layers
There are four layers of key settings on the keyboard. The layer O and layer 1 are for the Mac system. The layer 2 and layer 3 are for the Windows system.
If your system toggle is switched to Mac, then the layer O will be activated.
If your system toggle is switched to Windows, then the layer 2 will be activated. Remember that if you are using it in Windows mode, please make changes to the layer 2 instead of the top layer (the layer 0). This is a common mistake people are making.
The Backlight
Press fn + Q to change the lighting effect
Press fn + tab to turn the backlight on/off
Adjust The Backlight Brightness
Press fn + W to increase the backlight brightness
Press fn + 5 to decrease the backlight brightness
Adjust The Backlight Speed
Press fn + T to increase the light effect speed
Press fn + G to decrease the light effect speed $Keychron-Q6-Pro-Wireless-Mechanical-Keyboard-01 $12$$

Warranty

The keyboard is highly customizable and easy to be rebuilt. If anything goes wrong with any of the keyboard components of keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard.

Watch The Building Tutorial On Our Website
If you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself.

Factory Reset

Troubleshooting? Don’t know what’s going on with the keyboard?

Plug in the power cable and switch the keyboard to Cable mode.
Factory reset the keyboard by pressing fn + J + Z (for 4 seconds).
Download the right firmware and QMK Toolbox from our website.
Switch the keyboard to OFF mode and remove the space bar keycap to find the reset button on the PCB.
Hold the reset key first, then switch the keyboard to Cable mode.
Release the reset key, and the keyboard will now enter DFU mode.
Flash the firmware with the QMK Toolbox.
Factory reset the keyboard again by pressing fn + J + Z (for 4 seconds).