FOREVER SW-800 Smartwatch User Manual
- June 14, 2024
- FOREVER
Table of Contents
SW-800 Smartwatch
User Manual
SW-800 Smartwatch
Thank you for purchasing a product by Forever. Before use, please refer to the User’s manual, and save it for future reference. Do not disassemble the device on your own – all repairs should be done by a service technician. Use only original parts and accessories provided by the manufacturer. We hope that the product by Forever fulfills your expectation.
Introduction:
Before using the kids watch, carefully read the instruction manual to ensure correct operation. Kids watch is a small telecommunication device, used to locate its position and send data. Operation of the device is based on GSM/GPRS mobile network.
In the box:
- Smartwatch
- Charging cable
- User manual
- Extra strap
| Frequency range | Bluetooth 2402 – 2480 MHz |
|---|---|
| Maximo emitted power | -0,08 dBm EiRP |
Description:
- Touch screen
- Sports function
- Main on/off button
- Back to home button
- Charging pins
- Biometric sensor
Charging:
- Before using your smartwatch for the first time, make sure it is fully charged.
- It will take approximately 3 hours to fully charge the smartwatch. After connecting the char ger, the smartwatch charges automatically.
- Make sure the charging pins on the charging cable align correctly with the charging pins on the back of the smartwatch, then connect the other end of the cable to a power source.
Turning on/off the smartwatch:
Press and hold the „Main Button” until the smartwatch starts up. Swipe down
the screen and press the power off button.
Install „Forever Smart” app on the phone:
Search and install „Forever Smart” app from Google Play or App Store, or scan
the QR code below to install the app directly.
|
---|---
https://apps.apple.com/us/app/id1289542004|
https://play.google.com/store/apps/details?id=com.oplayer.forever
Connect the smartwatch withe the phone:
- Turn on Bluetooth on your phone.
- Open the „Forever Smart” app on your phone, then enter all the required information in the „Settings” menu.
- Select „Connect Smartwatch” in the „Settings” menu.
- Select the name of your device to connect it to your phone.
NOTE: The minimum operating system requirements for the phone to run the app and smartwatch are: Android 6.0 or later iOS 12.0 or later.
NOTE: To be able to use all the functions of the application and the smartwatch, you must agree to access all the content requested by the application when you first start the application, and then also enable access to notifications.
Unbind the smartwatch with the phone:
- Open the „Forever Smart” app on your smartphone.
- Press „Disconnect smartwatch” in the „Settings” menu and then confirm with „OK”.
- To disconnect the smartwatch from the iOS smartphone, click „Disconnect device” in the „Settings” menu of the „Forever Smart” application, then go to the iPhone’s Bluetooth settings and select the „Forget this device” option.
Operation introduction:
- The screen can be turned on by raising your hand or pressing a function button.
- Press and hold the watch face interface, then swipe left or right to change the watch face. To confirm your selection, click once on the selected style.
- To turn the watch on or off, press and hold the function button.
Control:
Power on: Press and hold the main button for 3 seconds.
Go to the menu: Swipe the watch face interface to the right.
Select a feature: Swipe up or down in the menu and select a feature icon.
Confirm: Select the icon.
Exit the menu: Swipe the interface to the right.
Return to the watch face: Briefly press the main or bottom button on any
interface.
Notifications: Swipe up the watch face interface.
Quick access: Swipe down the watch face interface.
Quick access:
In the „Quick access” area you can: mute notifications, adjust display
brightness, turn off the device, check device information, open
settings.
Notifications:
In the „Notifications” place, you can view notifications such as: incoming
calls, text messages, app notifications, etc. Menu:
Once the smartwatch face is visible, swipe right to enter and view all
functions in the menu.
Click on the icon to enter the submenu. Swipe from left to right to
return.
Functions:
-
Activity
The device automatically counts daily activity data. Select the „Activity” icon to see your steps, distance traveled and calories burned for the day. If your device is connected to the application, you can check its history. -
Heart rate
Press the icon to start heart rate monitoring. If the smartwatch is connected to the „Forever Smart” app via Bluetooth and automatic heart rate monitoring is enabled in the advanced settings, you can also check your heart rate data in the app. -
Thermometer
To start measuring skin and body temperature, press the „Thermometer” icon and wait until the device takes the measurement. The measurement takes approximately 60 seconds, after which the results will appear on the screen. The top result shows body temperature and the bottom result shows skin temperature.
• Wear the watch on your wrist for at least 5 minutes before taking a measurement. Otherwise, the temperature sensor may show inaccurate results due to a dull ambient temperature remaining on the sensor.
• The temperature detection function is not a medical function and is not intended for use in medical diagnosis, treatment or any other medical purpose.
-
Blood oxygenation
To start the measurement, press the „Blood oxygenation” icon. Wait until the device takes the measurement and displays the result. After synchronizing the data, you can check the measurement history in the application.
-
Sleep
The smartwatch automatically monitors your sleep at night. When you wake up the next day, the smartwatch will display the total number of hours you have slept. After synchronizing the data, you can check the measurement history in the application. -
Sport
Select the „Sports” icon to go to the sports selection. Select the sport you want and then start practicing it. The smartwatch will record training data.
-
Sport records
Check your recent training history.
-
Notifications
Check the notification history of your smartwatch. To decide from which sources you will receive notifications, launch the application, open the device tab and „Notifications”. -
Alarm
-
Weather
If the smartwatch is connected to the „Forever Smart” app via Bluetooth, the smartwatch will display the weather forecast. It is recommended to set the city manually, but you can also let the „Forever Smart” app do it automatically.
-
Camera
Using the Camera function, you can remotely take photos with your smartwatch. Open the applications on your phone, then select the Camera function on your device. Now you can place your phone anywhere within Bluetooth range and click on the screen to start the self-timer. -
Inactivity reminder
To receive notifications about inactivity, set the time interval, start time and end time in the application settings. You can turn off the sedentary reminder by swiping your finger across the screen. -
Stopwatch
Start the stopwatch function so that the Smartwatch starts measuring time.
-
Music
Select the music icon to enter the music playback control interface. You can select the previous/next song and play/pause the music. To exit the music playback control interface, slide the interface to the right. -
Timer
Start the timer function and select or enter how many minutes the countdown should last.
-
Breathing
To reduce stress, select the breathing function icon. You will be guided through a series of breathing exercises.
-
Menstrual cycle
Preview of the current cycle. To use this function, you must complete the data in the application.
-
Settings
Find phone: Find your device.
Brightness: Adjust the screen brightness by pressing the bar on the screen.
Display: Set the screen off time and standby time.
Display Setting: Select to change display settings, including the dial theme.
Language: Set the language you currently want to use on the device.
Sleep Mode : Enable sleep mode.
Device Information: Select to get information about the model, BT name and software version of your device.
Temperature Settings: Select to change temperature measurement settings.
Vibration Intensity: Vibration intensity settings.
Reset: Reset your device. After the reset, all data on the smartwatch will be cleared.
Power off: Turn off the device.
Rules for safe use:
SECURITY
Please read the tips provided here carefully. Failure to follow these
instructions may be dangerous or illegal.
DON’T RISK
Do not turn on the device in places where the use of electronic devices is
prohibited or where doing so may cause interference or other hazards. You must
comply with all types of prohibitions, regulations and warnings provided by
the staff of the place where you want to use the device.
PROFESSIONAL SERVICE
This product may only be repaired by the manufacturer’s qualified service or
an authorized service point. Repair of the device by unqualified service or by
an unauthorized service point may damage the device and void the warranty.
MODIFICATIONS
The manufacturer is not responsible for damage caused by independent
modifications.
MOTORY OR MENTAL DISABILITIES AND CHILDREN
The device should not be used by people (including children) with limited
physical or mental predispositions, or by people who have no experience in
using electronic equipment. They may only use it under the supervision of
persons responsible for their safety and after reading and understanding the
instructions for safe use of the device. Keep the device and packaging out of
the reach of children. Cords and plastic bags can wrap around a child’s neck
and cause suffocation. The device is not a toy.
BLUETOOTH
The device complies with radio frequency safety standards and recommendations.
All wireless devices may cause interference that may affect the operation of
other devices.
SURROUNDINGS
The device should not be operated in dusty conditions. Connect the device so
that it cannot be damaged and does not pose a threat to people or animals. Do
not expose the device to sunlight and do not use it or leave it in close
proximity to devices that emit a lot of heat (heaters, radiators, etc.).
Elements made of plastic may be deformed, which may affect the operation of
the device or lead to its complete damage.
BATTERIES
Avoid exposing the battery to very low or very high temperatures. Extreme
temperatures can affect battery capacity and life. Avoid exposing the battery
to contact with liquids and metal objects, as this may result in complete or
partial damage to the battery. Use the battery only for its intended purpose.
Do not destroy, damage or throw the battery into a fire – this may be
dangerous and cause a fire. A used or damaged battery should be placed in a
special container.
Overcharging the battery may damage it. Therefore, do not charge the battery
longer than necessary to fully charge it.
Correct disposal of used equipment
The device is marked with the symbol of a crossed-out waste container, in
accordance with the European Directive 2012/19/EU on waste electrical and
electronic equipment (Waste Electrical and Electronic Equipment – WEEE).
Products marked with this symbol should not be disposed of or disposed of with
other household waste at the end of their useful life. The user is obliged to
dispose of waste electrical and electronic equipment by delivering it to a
designated point where such hazardous waste is recycled. Collecting this type
of waste in separate places and proper recovery process contribute to the
protection of natural resources. Correct recycling of waste electrical and
electronic equipment has a beneficial impact on human health and the
environment. For information on where and how to dispose of used electronic
equipment in an environmentally safe manner, please contact the appropriate
local authority, the waste collection point or the point of sale where you
purchased the equipment.
Proper disposal of used battery
In accordance with EU Directive 2006/66/EC, as amended by Directive 2013/56/
EU on battery disposal, this product is marked with the crossed-out waste bin
symbol. The symbol means that the batteries or accumulators used in this
product should not be disposed of with normal household waste, but treated in
accordance with the directive and local regulations. Batteries must not be
disposed of as unsorted municipal waste. Users of batteries and accumulators
must use the available collection network for these items, which enables their
return, re- cycling and disposal. Within the EU, the collection and recycling
of batteries and accumulators is subject to separate procedures. To learn more
about existing battery recycling procedures in your area, please contact your
city office, waste management authority or landfill.
Declaration of Conformity with European Union Directives
TelForceOne S.A. hereby declares that the device Senior Watch ST-100 is in
compliance with Directive 2014/53/EU. The full text of the EU Declaration of
Conformity is available at the following web address:
https://www.manual.forever.eu/ST100
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>