WEBOO BILLIARDS P1 9ft Pool Table Instruction Manual
- June 14, 2024
- WEBOO BILLIARDS
Table of Contents
9FT POOL
TABLE
ASSEMBLY INSTRUCTION 
IMPORTANT :
This instruction is designed for professional 9FT pool tables. Please read
through the instruction book before attempting assembly to familiarize
yourself with all parts and assembly steps.
We’ve tried our best to state all steps clearly, but please understand that we
couldn’t draw all the details completely due to the complexity of some steps.
So we highly recommend you find and watch the video instruction on the home
page of above websites.
If the installation is still difficult for you after reading instruction book
and watching the video, please feel free to contact us, as we also provide
affordable and professional installation service for most areas.
Before Assembling Slate Pool Tables
Thank you for purchasing WEBOO products. Please read carefully these precautions about the assembly before start assembling your tables.
-
Choose a right place to position your slate table. The place you want to put your table should be as flat as possible. Otherwise this will increase the difficulty of leveling which is not easy for an unprofessional installer. Once you find a suitable place, please start installing at this exact location, because when you finish the installation, you cannot move the table anymore. Moving slate table will cause the table to be uneven. An uneven table, even one that’s only slightly off, will cause the pool balls to roll and adversely affect the accuracy of your shots.
-
Before assembling, we recommend installer preparing necessary tools as mentioned below.
– Level,
– Sandpaper,
– Putty (Builder’s bog is available in Bunnings),
– Staple gun or Spray adhesive,
– Needle Nose Plier,
– Shims,
– Screwdriver (Electrical is recommended) -
Two or more persons are needed for assembly. Pay careful attention during transport or assembly as slate pool tables are very heavy.
-
Be sure to wear protective gear like work gloves to avoid injury during assembly.
-
Be sure to protect the floor, wall or surrounding furniture with carpet, blanket or shock-absorbing materials during assembly in order not to damage them. Assembly work should be done where there is enough space.
Maintaining Slate Pool Tables
– Never lift, move or sit on your table due to easy breakage of slate.
– Keep your table in a dry, cool space and away from any sharp instruments.
– Please use a dry cloth to clean the timber surface.
– Do not eat, drink or smoke over the table. Remember to cover the table after
playing.
– If any relocation, re-felting, refurbishment or removal services are
required, please contact us to experience the professional services.
PARTS IDENTIFIER
