bcp SKY5922 Lighted Inflatable Santa Claus and Reindeer Christmas Decoration Instruction Manual
- June 14, 2024
- bcp
Table of Contents
bcp SKY5922 Lighted Inflatable Santa Claus and Reindeer Christmas
Decoration
PARTS
NOTICE
- Do not attempt to inflate in windy conditions. If the weather is too windy, deflate the product, secure it, and wait for better weather conditions.
- Please use all the provided stakes to secure this product to the ground.
- Protect the electric fan and power cord from exposure to water and snow.
- If any part are missing, broken, damaged, or worn, stop using this product until repairs are made and/or factory replacement parts are installed.
- Do not use this item in a way that is inconsistent with the manufacturer’s instructions as this could void the product warranty.
CLEANING AND STORAGE
- Use mild detergent and cold water to wipe the inflatable clean.
- Do not wipe the fan or motor with water.
- Leave it inflated until it is completely dry.
- Unplug, roll-up, and store it in the original packaging.
TROUBLESHOOTING
Not inflating properly
| Not plugged in properly| Make sure it is properly plugged in
---|---|---
Debris lodged in motor| Clean the motor of obstructions
Zipper open| Fully close the zipper
PRODUCT ASSEMBLY
Please retain these instructions for future reference.
-
Unroll the part B santa/sleigh and lay it on a clean, level surface.
Make sure the figure lays flat, free of tangles, then completely close the zipper located on the back of the sleigh portion. -
Locate the cord on the back of the part B santa/sleigh and plug it into a nearby outlet.
As the figure inflates arrange the weights inside so they sit on the bottom. -
Insert six part A stakes into the loops on the sides of the part B santa/sleigh then push the stake into the ground to secure them.
HELP CENTER
- Question about your product? We’re here to help. Visit us at: help.bestchoiceproducts.com.
PRODUCT WARRANTY INFORMATION
- All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long as the item is returned in its original product packaging and all accessories from its original shipment are included. All returned items will receive a full refund back to the original payment method. All returned items will not be charged a re-stocking fee.
- All returned items require an RA (Return Authorization) number, which can only be provided by a Best Choice Products Customer Service Representative when the return request is submitted. Items received without an RA may not be accepted or may increase your return processing time. Once an item has been received by Best Choice Products, refunds or replacements will be processed within 5 business days.
- All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If the reason for return is a result of an error by Best Choice Products then Best
- Choice Products will provide a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products, and is the customer’s responsibility to either use the original shipping boxes or purchase new boxes.
- Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items returned are not considered undamaged until they are received by Best Choice Products and verified as such. All damages to items are the customer’s responsibility until the item has been received by and acknowledge by Best Choice Products as undamaged.
WARNING
Manufacturer and seller expressly disclaim any and all liability for personal
injury, property damage or loss, whether direct, indirect, or incidental,
resulting from the incorrect attachment, improper use, inadequate maintenance,
or neglect of this product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>