LOEFME Desktop Paper Towel Holder 16×29.7cm User Manual
- June 14, 2024
- LOEFME
Table of Contents
****
LOEFME Desktop Paper Towel Holder 16×29.7cm
Desktop Paper Towel Holder Installation and User Manual
-
List of parts
-
First, screw the round cap onto the]cylindrical tube
-
Secure the cylindrical tube to the base using M6 screws with washers. ****
-
Please note that the side= with the silicone should be facing Secure the thin cylindrical tube to the outer screw hole of the base using M4 screws. towards you
-
Please make sure that the orientation here is aligned with the cylindrical tubeS ecure the square tube to the base using M5 screws in the three raised screw holes. Ensure the square tube is wedged between these three raised portions.
-
Secure the square tube to the cylindrical tube using M4 screws.
-
Peel off the 3M adhesive backing from the three suction cups and stick them onto the base in three different directions.
-
After installing the three suction cups, it should look like the diagram below.
-
Thread the paper roll core through the large cylinder and place it on the paper After installing the three suction cups, it should look like the diagram below.
Please make sure to thread the paper roll through the gap between the square tube and the cylindrical tube.
-
After installing the three suction cups, it should look like the diagram below.
-
When the tear line of the paper roll is pulled out to a distance of approximately for one-handed Pay attention to the orientation of the paper roll and thread it through this gap tearing.
- Thank you for choosing our product. We appreciate your support. Wishing you a happy and fulfilling life.
Documents / Resources
|
LOEFME Desktop Paper Towel Holder
16x29.7cm
[pdf] User Manual
Desktop Paper Towel Holder 16x29.7cm, Paper Towel Holder 16x29.7cm, Towel
Holder 16x29.7cm, Holder 16x29.7cm
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>