3DMakerpro Mole 3D Scanner Mole Standard Kit User Manual

3DMakerpro Mole 3D Scanner Mole Standard

• Check the Tutorial below to know how Mole works.
  • https://youtu.be/EpBBW7k2zMU
  • https://forum.jimumeta.com/home/help/download.html
• Get latest Manual from
  • https://forum.jimumeta.com/home/help/manual.html

• Plug one side of the data transmission cable (as it’s showing Device Cable) into the scanner, another into the computer USB2.0 port and power adapter.

Device Cable

• Plug the device cable into the port of the scanner, make sure the red dot is lined up with the groove on the port.
• The small cable on the plug can assist you to pull it out.

 Turntable Cable

• The turntable can be powered up by connecting it to the computer or the power adapter with the turntable cable.

• Product images are for illustrative purposes only.
• 1234Not included in the Standard Combo.

Operating System Requirement

• Minimum
  • Intel Core i5 8th, 16GB RAM, MX250 GPU with 2GB VRAM
• Recommended
  • Intel Core i7 8th, 16GB RAM, NVDIA1060 GPU with 4GB VRAM
• To prevent antivirus software from blocking the driver, please uninstall the antivirus software.

3DMAKEAPAO

• *  @3DMakerProCares

  • @official3DMakerPro
  • @3DMakerPro
  •   https://s1018.3dmakerpro.com/
  •  servlce@3dmakerpro.com
• JimuMeta
  • @JimuMota
  •  @JimuMeta
  •  https://www.jimumeta.com/
  •  service@jimumeta.com
  • store.3dmakerpro.com

References

• forum.jimumeta.com/home/help/download.html
• forum.jimumeta.com/home/help/manual.html

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>