3DMAKERPRO JMSTUDIO macOS App User Guide
- June 1, 2024
- 3DMakerpro
Table of Contents
macOS | Windows
Manual
Software Installation
Operating System Requirement
Recommended Computer Configurations
Intel Core i7 8th, 16GB RAM, NVDIA1060 GPU with 4GB VRAM
Minimum Computer Configurations
Intel Core i5 8th, 16GB RAM, MX250 GPU with 2GB VRAM
How to Install
You can acquire the application file by visting our website.
Follow the steps below to install the software.
For macOS
- Double-click the application file and drag it to the Applications folder.
- When this erro occurs, please go into your Security & Privacy, check the App Store and Identified Developers radio button, and click Open Anyway.
- Allow JMStudio to access files in your Desktop folder.
- Run JMStudio, allow it to access the camera, now the installation is completed.
For Windows
- Click on the application file, follow the intallation wizard and click Next to install the software.
Software Upgrade
Please make sure you’re running the lastest version of software.
User Interface
The user interface consists of the following parts:
- Title Bar
- Tool Bar
- Work Mode
- 3D Viewer
- Work Panel
- Data Panel
- Status Bar
Shortcut Key
The upper-left area in the 3D Viewer shows you the commonly used mouse and keyboard shortcuts; check all the shortcuts by hovering over this area and clicking the ellipsis below. You can also view or modify more shortcuts by going Settings Shortcut Key.
Scanning Workflow
Import the Calibration File
The first-time scan requires you to calibrate the scanner by importing the
calibration file.
Before that, please refer to Connect the Cables to ensure the scanner is well-
connected.
Make sure your PC is networked to download the calib file. For Windows,
JMStudio can automatically identify your scanner and download the calib as
well; for macQOS, it requires you to set the scanner type first then download
it.
Follow the steps below to calibrate your scanner:
For macOS
- In the Work Mode panel, click “Settings” to open the menu and choose the corresponding scanner type.
- In the Title Bar, click File Import calib and go into Network Download, then input the device SN and click “Import”.
The device SN can be found at the buttom of the scanner body, then input the letters and numbers and apply to await the prompt “Import successfully”
Note: Please input the last 7 numbers if you are using CR-Scan Lizard.
Preparation
Preparation for special objects
lynx: With 400mm wide capture range, lynx is capable of capturing as many
as details, and scanning large sized objects in a smooth and fast manner.
Mole: Mole has a standard format of 200mm and an accuracy of 0.05mm,
which can capture more target features and is suitable for fine scanning of
small objects.
Whale: With two cores both in one, Whale is able to scan large-sized
objects by activating its wide core; while captures the greatest details of
small-sized objects with the micro core at work.
MagicSwift Plus: With 400mm wide capture range, MagicSwift Plus is
capable of capturing as many as details, and scanning large sized objects in a
smooth and fast manner.
CR-Scan Lizard: CR-Scan Lizard has a standard format of 200mm and an
accuracy of 0.05mm, which can capture more target features and is suitable for
fine scanning of small objects.
Please choose the right scan mode according to the size of the object, for
more information: Scan Mode
Objects needing special treatment
In order to get a better scanning result, please use spray, dry shampoo,
powder, etc. on the following types of objects before scanning:
Preview and Adjustment
Click “Start Scanning” in the splash screen and will go into scanning preview.
In the preview, the Work Panel will switch into “Adjust” panel.
In order to get a best scanning result, please carefully read through the
following instructions.
Scan Mode
In Easy Scan, you can operate the scanner flexibly to scan large sized objects
in irregular shapes; In Table Scan, the scanner works with tripod and
turntable to scan small sized objects and free your hands.
Please choose the right scan mode accordingly, and keep a proper working
distance as follows.
unit: mm| Working Distance| Object
Easy Scan Size| Table Scan
---|---|---|---
Lynx| 400-900| 100-2000| 100-500
Mole| I 200-400| I 15-1500| I 15-300
wide-core
Whale
micro-core| 400-900
200-400| 200-2000
15-2000| 200-500
15-300
MagicSwift Plus| I 400-900| I 100-2000| I 100-500
MagicSwift| 400-900| 200-2000| 200-500
CR-Scan Lizard| I 200-400| I 15-1500| I 15-300
CR-Scan 01| I 400-900| I 200-2000| I 200-500
Choose “Easy Scan” or “Table Scan” in the Work Mode.
For Whale
We suggest you scan an object of arround 20x20x20cm at your first attempt.
If the data cannot be captured or the software says “tracking lost” please
follow the above sheet to adjust the distance between the scanner and the
object, and make sure the latter is clear of clutter. If the scanning goes
well, please adjust the scanner’s angle and confirm again; if not, please
contact us.
Choose “Wide” or “Micro” for the Work Mode in the Work Panel_Adjust.
SLAM Mode
Choose “Geometry Mode” if the scanned object is bumpy and has great geometic
features; while choose “Texture Mode” when scanning objects with vivid colors,
patterns and textures.
Please choose the right SLAM mode for your target objects.
Working Distance
The distance indicator on the left side of the 3D viewer can help you find the
optimal woking distance.
Set the depth range of data aquisition in the Work Panel_Adjust_Depth of Field.
Locate the Object
The preview window on the top right of the 3D viewer helps you locate the
object. Make sure it fully exposed in the preview window.
Brightness
Use the slider to adjust the brightness to a proper level in the Work
Panel_Adjust_Brightness.
Sensitivity
Use the slider to adjust the Sensitivity to a proper level in the Work
panel_Adjust_Brightness. Sensitivity is a parameter to control how sensitive
the scanner is to light, affecting the quality of the scan data. Normally set
high sensitivity when scanning dark objects, as it allows the scanner to pick
up more details while also making the scan data noiser; it’s often the
opposite at low sensitivity. We can adjust this parameter to balance the data
quality and noise reduction according to the type and color of the target
object.
Easy Scan
Scan
Adjust the scanner’s position and angle to centre the target object in the
preview window; check if they’re kept in a proper distance by focusing on the
distance indicator.
For more information: Working Distance , Locate the Object, Brightness Click
“Scan” on the work panel, hit the spacebar or press the start/stop button on
the scanner(supported on specific models) to start scanning.
Stop
Click the red counter, hit the spacebar or press the start/stop button on the
scanner(supported on specific models) to stop scanning.
*F: Frame is used to measure the pictures. The more frames you’ve collected, the larger and more complete data you’ll get, while it requires more time and a stronger PC to process the data. It’s suggested to limit the single scan within 2000F.
Append
If you want to scan at a different angle and add a new scan, click “Append”,
hit the spacebar or press the start/stop botton on the scanner(supported on
specific models).
Process
Click “Process”, hit the spacebar or press the start/stop botton on the
scanner(supported on specific models) to go into the Edit Mode and process the
scan data. You can also hit right or left arrow keys to the next or last step.
Table Scan
Initial
Adjust the scanner’s position and angle to centre the target object in the
preview window; check if they’re kept in a proper distance by focusing on the
distance indicator.
For more information: Working Distance , Locate the Object, Brightness Remove
the object from the turntable when scanner is well positioned.Click “Initial”,
hit the spacebar or press the start/stop botton on the scanner(supported on
specific models) to scan the empty turntable until it turns red.
Stop Initializing
Click the red counter, hit the spacebar or press the start/stop button on the
scanner(supported on specific models) to stop initializing.
*F: Frame is used to measure the pictures. The more frames you’ve collected, the larger and more complete data you’ll get, while it requires more time and a stronger PC to process the data. It’s suggested to limit the single scan within 2000F.
Scan
Leave the turntable there and place the target object in the centre of it.
Click “Scan”, hit the spacebar or press the start/stop button on the
scanner(supported on specific models) to start scanning.
If you find the initialization result unsatisfactory, can also hit right or
left arrow keys to the next or last step. Click the button “1″ hit the
spacebar or press the start/stop button on the scanner(supported on specific
models) to re-initialize.1
Stop
Click the red counter, hit the spacebar or press the start/stop button on the
scanner(supported on specific models) to stop scanning.
*F: Frame is used to measure the pictures. The more frames you’ve collected, the larger and more complete data you’ll get, while it requires more time and a stronger PC to process the data. It’s suggested to limit the single scan within 2000F.
Append
If you want to scan at a different angle and add a new scan, click “Append”,
hit the spacebar or press the start/stop botton on the scanner(supported on
specific models).
Process
Click “Process”, hit the spacebar or press the start/stop botton on the
scanner(supported on specific models) to go into the Edit Mode and process the
scan data. Or hit right or left arrow keys to the next or last step.
Reset
Click “Reset”, hit the spacebar or press the start/stop botton on the
scanner(supported on specific models) to initialize again. Or hit right or
left arrow keys to the next or last step.
Editing
Data Editing
Before meshing the point cloud data, you can do simple editing on it to delete
excess data and ensure the guality of the model.
-
Select Tools
Hover your mouse over the Tool Bar on the left side of the interface, here are a few selection tools available.
Point Picker
Line Picker
Rectangle Picker
Lasso Picker
Poyline Picker
Pick on Face
Pick through Face -
Select the Data
Hold Ctrl and press left mouse button in the 3D Viewer to select an area, the selected place will turn red. -
Process the Data
Hover your mouse in the 3D Viewer and right click or click on “Edit” in the Title Bar to show the menu then edit your data.
Select All: Select all visible data.
Reverse Selection: Select the data outside the selected area.
Boundary Selection: Select an area that falls with a given region or boundary.
Plane Selection: Select all the data on one fitting plane.
Clear Selection: Deselect the data.
Plane Selection can be used to select a plane such as the turntable, floor, wall and have them deleted. Watch the tutorial below to learn more: https://forum.jimumeta.com/home/tutorial/41ba5746e3df4aebbfccfa90abde0el18.html
Align
Watch the tutorial below to learn more about Align:
https://forum.jimumeta.com/home/tutorial/a911d93894004ba7a618ac0e7b309d04.html
Go into “Align” in the Work Panel and select the align mode.
Auto Align
Select the scans that need to be aligned to in the “Work Panel”. Drag one in
the above highlighted box as the reference, another in the box below as the
floating scan. Click “Align” to merge them together.
Manual Align
Select the scans that need to be aligned to in the “Work Panel”. Drag one in
the above highlighted box as the reference, another in the box below as the
floating scan.
Click “+” in the mark point box to automatically generate three pairs of mark points in the 3D Viewer. Right-click to pick up the points then reposition them, and drag each pair to the place you want until they are matched.Click “Align”:
Process
Check the processing steps needed for your point cloud data in the Work Panel
Process:
[Fusion] Mesh the point cloud data by connecting the dots to produce a
complete model.
[Remove Noises] Clean up the mesh by removing the floating noises from the
scans.
[Repair Gaps] Fill the holes on the mesh to produce a watertight model.
[Simplify] Narrow down the amount of mesh faces to reduce the data size.
[Texture Mapping] Apply the texture or color information onto the mesh
surface.(Colors only available for some of 3DMakerpro models.) Note: here
“Texture Mapping” refers to the texture capturing by the scanner itself. If
you need to do “External Texture Mapping”, please uncheck this step.
Click “Process” in the 3D Viewer after checking the needed steps.
Select the scans in this pop-up window and click “”Apply” to start the data processing.
You can further edit on the mesh model to delete excess data with the selection tools available. For more information: Data Editing Watch the tutorial below to learn more: https://forum.jimumeta.com/home/tutorial/fee6bfaad70e41a1b251ed0c555a8496.html
Reorientate
Adjust the model’s posture, align its base to XY axis of the coordinate system
for further model editing and 3D printing.
Reorientate your 3D model by going into the Work Panel_Reorientate. Three mark
points will be automatically created to generate a plane; right-click to
reposition them but not make them in a line; flip directions of the normal
line in the Work Panel_Reorientate; click “Reorientate”to execute it.
In the Work Panel_Reorientate, there are other settings such as changing the view types, moving the plane, rotating the model and deleting the highlighted excess data below the plane.
Drag four anchor points to reposition the plane, and drag the arrow in the middle to move the plane vertically; click “Apply” if you are satisfied.
Export the Model
Click “Export” in the Title Bar_File or the export icon in the Data Panel to export the model.
Click “Yes” in the pop-up, will go to reorientate the model if checking
“Reorientate Axis”.
For more information: Reorientate
JMStudio now supports model exported in obj, stl and ply format, stay tuned for more available formats. Thank you for your time!
Download latest JMStudio from
https://fforumjimumeta.com/home/help/download.html
Get latest Manual from
https://ffforum.jimumeta.com/home/help/manual.html
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>