Skybound 700LB Tree Swings Instruction Manual
- June 14, 2024
- skybound
Table of Contents
Skybound 700LB Tree Swings
A PERSONAL MESSAGE FROM OUR FOUNDER
When I shop, I am not just buying a product or service. I purchase why that brand focuses on what they do, what their corporate philosophy is, the quality of their products, and whether or not my personal core values align with that brand’s vision. When I don’t feel great about a company’s brand, products, or how I’m being treated as a customer, then I know they are not delivering on what matters most: exceeding the customer expectation by delivering happiness with their products, quality, and service.
This primary focus is what drives our culture at Team Sky bound. For supporting our vision, we would like to personally thank you for trusting us to deliver happiness to you and your family!
- Kiki (Founder) & Team Sky Bound
“Nurturing the inner-child in all of us by uniting communities worldwide and promoting an active lifestyle.”
For customer service, please contact: help@skyboundusa.com
IMPORTANT INFORMATION
WARNING
This object is subject to wear and tear. No warranties whether expressed or
implied are provided.
Injury will likely occur with the use of a trampoline or any associated
product.
Use with super vision. Use at your own risk.
Only Use in a well-lit, well secured down area.
NO. | Part Name | Pictures | Quantity |
---|---|---|---|
1 | Mat | ![Parts](https://manuals.plus/wp-content/uploads/2023/11 | |
/Skybound-700LB-Tree-Swings-Instruction-Manual-1.png) | 1 | ||
2 | Tubes | ![Parts](https://manuals.plus/wp-content/uploads/2023/11 | |
/Skybound-700LB-Tree-Swings-Instruction-Manual-2.png) | 4 | ||
3 | Rope | ![Parts](https://manuals.plus/wp-content/uploads/2023/11 | |
/Skybound-700LB-Tree-Swings-Instruction-Manual-3.png) | 2 | ||
4 | Tent | 1 |
ASSEMBLY INSTRUCTIONS
INSTALLATION STEPS OF SWING NET FRAME
STEP 1
Lay the swing (1) on the floor and open the tabs with the Velcro straps.
STEP 2
Slide swing tubes (2) into the pockets of swing (1) as shown below. Connect the four tubes together.
STEP 3
Make sure that a thicker tube end with a hole follows a pipe end with a spring button. NOTE: Do not connect the tubes yet.
STEP 4
Place the two ropes (3) with the suspensions made of plastic in the correct sequence next to the swing (1). Please make sure that the ropes are not twisted.
STEP 5
Slide the plastic suspension of the rope (3) from above through the opening of the tab with the Velcro straps. Then use side “II”(see marking) to attach the suspension to the thicker tube.
STEP 6
Now connect the tubes to each other, while pressing down the spring pressure button on the thinner end of the tube. The inter-locking is achieved through the latching and clicking of the push button.
Now, close the tab with the Velcro straps.
STEP 7
On the swing that has been installed, install 4.
Installation completion drawing
888-891-4689
Sky Bound Customer Service
help@skyboundusa.com
customer support
www.SkyBoundUSA.com
www.TrampolinePartsCenter.com Sky
Bound, a BX International Inc Company.
Sky Bound is a registered trademark of BX International Inc.
in the U.S. and other countries. All logos, names, characters, likenesses,
images, slogans and packaging appearance are the property of Sky Bound.