Hinyx A02 Magnetic Car Vent Mount User Manual
- June 14, 2024
- Hinyx
Table of Contents
A02 Magnetic Car Vent Mount User Manual
Product Features
- Smart touch button on the top of back and the LED indicator on both sides, fully automatic induction, one hand operation
- Built-in wireless charging transmitter, support qi wireless charging for all Qi-enabled smart phones
- Anti-slip silicone on both arms and feet, Type-C charging port
- Lower charging temperature and high charging efficiency
- FOD function: when put metal or magnet objects on the charger, the fixation clamp would close automatically and hold tightly. Meanwhile, the indicator light flashes
- Perfect protective function based on over-voltage, over-current, over-temperature and short-circuit protection.
Product Specifications
Model: X2
Output: 15W(Max)
input: 12V 2/9V 2A/5V 2A
Operation Frequency: 110-205KHZ
Charger Efficiency: ->73%
Charger Distance: 2-8mm
Material: ABS
Size:1326524mm
Package List
- Car Wireless Charger*1
- Air Vent Clip*1
- Sucker bracket`1(optional)
- Type-C Cable*1
- User Manuals’
Product Construction
Product Operating Guide
-
1. When the car wireless charger powers on, the indicator light would flash two times. and the fixation clamp would open automatically. The indicator light powers off when power standby -
- When you place the phone to the car charger, the clamp will grip your phone automatically and charge. Just touch the release button if you want to take out the phone.
-
When inserting the mobile phone without wireless charging function or other metal object, the fixation clamp would close automatically and hold tightly. Meanwhile, the indicator light flashes
-
- The LED indicator light will flashes and the product stop charging when the current is too large or there is foreign object. Do not wireless charging the phone if similar situation happened
-
Please purchase the wireless receiver module or case separately (Not included in the product) if your phone do not support wireless charging.
Attention
- Please use QC 3.0 standard charger
- The green indicator will flash 2 times after connecting the power .it means FOD testing. the clamp will open automatically 3 seconds later .
- Please do not use it in severly high temperature, high humidity or corrosive environment, to avoid damage to the circuit leakage.
- Please do not put the metal (Such as coin etc.) on the charging pad when charging, to avoid damage from heating
- We offers Free Replacement or Refund within 30 days for any conditions,12 months warranty after purchase. Any problems please feel free to let us know.
FCC Statement
This device complies with Part 15 of the FCC rules Operation is subject to the
following two conditions:
1)this device may not cause harmful interference, and 2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class El digital device, pursuant to part 15 of the F CC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
ca n radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications However, there is no guarantee that interference will n of
occur in particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or it locate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
Radiation Expo sure Statement
The equipment complies with FCC radiation exposure limitsset forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>