Goldair GCPF150 40cm Pedestal Fan with Remote Instruction Manual
- June 4, 2024
- GOLDAIR
Table of Contents
Operating Instructions
40cm Pedestal Fan with Remote
GCPF150 40cm Pedestal Fan with Remote
Model: GCPF150
General Care and Safety Guide
Thank you for choosing this Goldair product. This Goldair appliance has been
designed and manufactured to high standards of engineering and with proper use
and care, as
described in this leaflet, will give you years of useful service. Please read
these instructions carefully and keep them for future reference.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
- Ensure that the fan is switched off from the supply mains before removing the guard.
- Use only the voltage specified on the rating plate of the appliance.
- Keep all objects at least 1 Metre from the front, sides, and rear of the appliance
- This appliance is intended for household use only and not for commercial or industrial use.
- Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock, or injury.
- The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
- Always unplug appliances when not in use.
- When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Goldair Customer Services Team.
- If your appliance does not work or is not working properly, contact the place of purchase. Repair work on the appliance by unqualified persons can cause serious risk to the user.
- Ensure hands are dry before handling the plug or the main unit.
- Carry out regular checks of the supply cord to ensure no damage is evident.
- Ensure that the cord is fully extended (not coiled) while in use.
- Avoid contact with the moving parts. Keep hands, hair, and clothing, away from the blade of the fan during operation to reduce the risk of injury to the person and/or damage to the unit.
- Switch off and use handles provided when moving.
- It is recommended that this fan is plugged directly into the wall socket.
- A correctly specified, undamaged extension cord may be used with this fan provided it is used in a safe manner.
- Never place appliances close to a radiant heat source.
- Never operate in areas where petrol, paint, or other flammable liquids are used or stored.
- Never use the appliance to dry clothes.
- Never insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire, or damage to the appliance.
- Never use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) and rinsed in hot soapy water only. Always remove the plug from the mains supply before cleaning.
- Never connect the appliance to the mains supply until completely assembled and adjusted.
- Never remove the plug from the power socket until the appliance has been switched off.
- Never remove the plug from the power socket by pulling the cord – always grip the plug.
- Never twist the kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use.
- Never use this appliance in the immediate surroundings of a bath, a shower, a swimming pool, or other liquids. The appliance must not be immersed in any liquids.
- Due to the risk of injury, never use this appliance for any purpose other than its intended use. This appliance is intended for use in households and similar applications such as staff kitchen areas in shops, offices, and another working environments; farm houses, by clients in hotels, motels, bed and breakfast type environments, and other residential type environments
- Never use this appliance outdoors.
- Never operate the appliance with a damaged cord or plug, after it malfunctions, or if it has been damaged in any manner. Have the appliance checked and repaired by a qualified electrician if repair is necessary.
- Never place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
Model No: GCPF150
Supply: 220-24OVAC 50Hz
Wattage: 50W
Approval No: TUV022916EA
MADE IN CHINA
QC Passed: PO#-WWYY
CUSTOMER SUPPORT
NEW ZEALAND PH: 0800 232 633
AUSTRALIA PH: 1300 465 324
Components
Main Unit
1. Front Grill
2. Blade Cap
3. Blade
4. Plastic Mounting Nut
5. Rear Grill
6. Motor Shaft
7. Oscillating Knob
8. Motor Housing
9. Neck Screw
10. Switch Box| 11. Set Screw
12. Inner Tube
13. Height Adjustment Collar
14. Outer Tube
15. Base Decorative Cap
16. Screw
17. Cross Bar A
18. Cross Bar B
19. Screw
---|---
Control Panel and Remote Control
A. Power indicator
B. Swing indicator
C. Speed indicators（high-mid-low）
D. OFF button
E. TIMER button
F. ON/SPEED button
G. SWING button
H. Time indicators 0.5-1-2-4 hrs
Assembly
First, loosen and remove the four screws from the cross bars. Then interlock
cross bars A and B. Be sure to align the four holes in the bars with those on
the flange of the outer tube. Secure the flange to the bars with the four
screws.
Loosen and remove the height adjustment collar from the top of the inner tube.
Slide the base decorative cap down over the assembly. Replace the height
adjustment collar on top of the inner tube. Pull the inner tube out from the
outer tube to adjust the tube to the desired height and tighten the collar.
If necessary, slightly loosen the set screw by turning it anticlockwise. Slide
the switch box down over the inner tube and tighten the set screw. Make sure
the set screw is tightly secured.
Blade and grill
Unscrew the guard mounting nut from the front of the motor housing by rotating
it anticlockwise.
Position the rear grill against the front of the motor housing with the handle
at the top, ensure that the locating pegs on the motor housing are engaged
correctly in the holes of the rear grill.
Tighten the guard mounting nut clockwise; do not to over tighten.
Push the fan blade onto the motor shaft, locating the slot at the back of the
blade on the drive pin that passes through the motor shaft. Tighten the blade
cap by turning it anticlockwise.
Position the front grill against the rear grill so that the holes in the rims that accept the small nut and bolt are in line. Insert the bolt through the holes and screw on the nut. Do not fully tighten at the stage. Push the grill retaining clips into position ensuring that they engage correctly on the rim of the grill.
Fully tighten the small nut and bolt that passes through the rim of the grill.
Operating your Fan
Always choose a safe location for the fan, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the unit
before use. This appliance requires no installation, it should be used solely
as a portable appliance.
WARNING: Keep all objects at least 1 metre from the front, sides, and
rear of the appliance.
IMPORTANT! NEVER COVER THIS APPLIANCE!
Place the fan on a dry, level, and sturdy surface.
Check that the fan control is set to the off position before plugging into the
mains supply.
Fan control
Switch on the appliance by pressing the on/speed button on the control panel.
The fan starts to blow at low speed.
The low speed indicator will illuminate.
To change speed, press button. Fan speed will change with each button press.
The corresponding indicator light will illuminate
Switch fan off by pressing off button.
To tilt, loosen the neck screw – adjust to position – then tighten the neck
screw to hold.
Oscillation
To activate the oscillation function, press the swing button. The swing
indicator will illuminate and the fan will begin to oscillate. To stop
oscillation, press button a second time.
Timer
If you wish to turn the fan off at a pre-determined time press the timer
button. The fan can be set to turn off from 0.5 hours to 7.5 hours.
To set the timer, turn the fan on at the desired speed, press the timer button
until the desired run time is illuminated. The fan will turn off once the time
has expired. If no time is selected, the appliance will operate continuously.
Remote control
The remote requires a line-of-sight path to allow for the signal to be
received by the unit. Position the unit so the receiver lens is visible from
the remote control.
The symbols on the remote correspond to the symbols on the main unit.
Ensure batteries are inserted in the correct direction. Do not mix battery
types. When replacing, ensure both batteries are changed simultaneously. 2 x
AAA size batteries are required.
Cleaning
The fan requires regular cleaning to ensure trouble-free operation.
Ensure that the fan is switched off from the supply mains before removing the
guard.
Unplug the fan from the mains supply before cleaning.
Use a damp cloth (not wet) to wipe the exterior of the fan to remove dust and
dirt.
Use a vacuum cleaner to remove dust and fluff from around the grills.
Ensure the fan is dry before plugging back into the mains supply.
Do not attempt to dismantle the fan. There are no user-serviceable parts. For
service or repair, contact an authorised electrical service technician.
Proof of purchase
To receive warranty retain receipt as proof of purchase. (Refer to back of
booklet).
SUPPORT AND TECHNICAL ADVICE
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@cdb.co.nz| Goldair – Australia
Monday – Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
info@cdbgoldair.com.au
---|---
One Year Warranty
Thank you for purchasing this Goldair product. Your product is warranted
against faults and manufactured when used in normal domestic use for a period
of one year. In non-domestic use, Goldair limits the voluntary warranty to
three months.
Goldair undertake to repair or replace this product at no charge if found to
be defective due to a manufacturing fault during the warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident,
incorrect installation, or work carried out by anyone other than a qualified
electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits to you given by this warranty are in addition to other rights and
remedies available to you under a law in relation to the goods or services to
which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
In New Zealand this warranty is additional to the conditions and guarantees of
the Consumers Guarantee Act (1993).
Goldair – New Zealand
CDB Goldair
PO Box 100-707
N.S.M.C
Auckland, 0745
Phone +64 (0)9 917 4000
Phone 0800 232 633
www.goldair.co.nz| Goldair – Australia
CDB Goldair Australia Pty
PO Box 574
South Morang
Victoria, 3752
Phone +61 (0)3 9365 5100
Phone 1300 GOLDAIR (1300 465 324)
www.goldair.com.au
---|---
Goldair One Year Warranty (IMPORTANT: Please complete and retain this warranty
card)
Name………………………………
Address…………………………..
Place Of Purchase………………
Name Of Product……………
Date of Purchase………………
Model Number………………..
Attach a copy of the purchase receipt to this warranty card
Due to continual design improvements, the product illustrated in this User Manual may differ slightly from the actual product.
Documents / Resources
|
Goldair GCPF150 40cm Pedestal Fan with
Remote
[pdf] Instruction Manual
GCPF150 40cm Pedestal Fan with Remote, GCPF150, 40cm Pedestal Fan with Remote,
Pedestal Fan with Remote, Remote
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>