ECO-WORTHY B00PFGP0EA 10W Solar Panel Kit Instruction Manual

ECO-WORTHY B00PFGP0EA 10W Solar Panel Kit

Specifications

• Solar Panel Kit: 10W
• Solar Panel: 10W with 1M extension cable
• Charge Controller : 10A PWM
• Battery-Controller Cable: Pair of 2m with crocodile clips
• Application: 12V battery charging for vehicles, boats, gate openers, chicken coops

Package Included

The solar panel kit includes:

• 10W Solar Panel
• 1M Extension Cable
• 10A PWM Charge Controller
• Pair of 2m Battery-Controller Cable with Crocodile Clips

Installation of Solar Panel Kit
Before installing the solar kit, please ensure that your 12V battery is not over discharged. The battery voltage should be higher than 8V, which is the minimum voltage required to start the solar charge controller. If your battery is over discharged, please charge it beforehand by other means for a short period of time.

Step 1: Connect Battery to Solar Charge Controller

1. On the solar controller end, attach the ends of the 2m cable using the screw.
2. On the battery end, attach the terminal using the crocodile clips.

The RED battery terminal should be connected to the + battery terminal of the controller, and the BLACK battery terminal should be connected to the – battery terminal of the controller.

Step 2: Battery Type Setting

1. Press the button on the charge controller for 5 seconds until the battery status LEDs start flashing to enter the setting mode.
2. Press the button to select the desired battery type:

Note: If you want to charge your lithium battery with this charge controller, we recommend selecting Gel Battery Mode for charging

• Application
  • The solar panel kit is perfect for off-grid 12 volt batteries charging system and a variety of DC applications. It is designed for charging 12 volt batteries in cars, trucks, RVs, cabins, boats, marines, sheds, cabins, gate openers, battery chicken coops, and home security system batteries.
• Caution
  • For maximum output, ensure that the solar panel is situated outdoors and is exposed to as much sunlight as possible, without any shading. Even a small shaded area can significantly reduce the output (e.g. leaves, trees, etc).

FAQ

1. Q: What is the maximum voltage required to start the solar charge controller?
   A: The minimum voltage required to start the solar charge controller is 8V.

2. Q: Can I charge a lithium battery with this charge controller?
   A: Yes, you can charge a lithium battery with this charge controller. We recommend selecting Gel Battery Mode for charging.

3. Q: What is the application of this solar panel kit?
   A: This solar panel kit is suitable for off-grid 12 volt batteries charging system and a variety of DC applications, including vehicles, boats, gate openers, chicken coops, and home security system batteries.

SUPPORT

• If you are experiencing technical problems and cannot find a solution in this manual, please contact ECO-WROTHY for further assistance.
  • Tel: 186-35-602105
  • E-mail:customer.service@eco-worthy.com
  • Web: www.eco-worthy.com
• Dear Customer, Thank you for selecting this ECO-WORTHY solar panel kit. This manual explains the installation of your solar kit and answers some frequently asked questions. Please read this manual carefully before setting up your system. Remember, all work should be carried out by an appropriately qualified person. Precautions and safety measures should be taken in all cases.
• If you have any concerns about the suitability of the kit for your application, or doubts about any of the instructions in this manual, please contact our Sup-port at 417-459-7063 or via E-mail at customer.service@eco-worthy.com

Product Introduction

• This is a 10W solar panel kit ,using a 10W solar panel with 1M extension cable, a 10A PWM charge controller ,a pair of 2m battery-controller cable with crocodile clips. It’s a great choice for 12V battery charging ,work for Vehicle ,Boat, Gate opener, Chicken coop battery charge.

Package Included

• 10W Monocrystalline solar panel with 1m cable
• 10A PWM solar charge controller
• 2m controller-battery cable with crocodile clips

Installation of solar panel kit

Before installation the solar kit, please ensure that your 12V battery is not over discharge. The battery voltage should higher than 8V – this is the minimum voltage required to start the solar charge controller. If your battery is over discharge, please charge it beforehand by other means for a short period of time.

• Connect your 12V battery to the solar charge controller using the 2m cable in the following step

  •  On the solar controller end, attach the ends of the cable using the screw.

• On the battery end, attach the terminal using the crocodile clips.

• The RED battery terminal should be connected to the “+” battery terminal of the controller, and the BLACK battery terminal should be connected to the “-” battery terminal of the controller.

Battery type setting

• Step 1: Enter setting mode by pressing button for 5s until the battery status LEDs are flashing.
• Step 2 : Select the desired mode by pressing button.
• Step 3: The mode will be saved automatically without any operation for 5S and LED will stop flashing.

• Important notes If you want to charge your lithium battery with this charge controller, we would recommend you to select “Gel Battery Mode” for charging.

Application

• Perfect for off grid 12 volt batteries charging system and a variety of DC applications, designed for charging 12 volt batteries in car, trucks，RVs, cabins, boats, marines, shed, cabin, gate opener, battery ，chicken coop home security system battery

Caution

• For maximum output, ensure that the solar panel is situated outdoors and is exposed to as much sunlight as possible, without any shading. Even a small shaded area can significantly reduce the output (e.g. leaves, trees etc).
• Positioning the solar panel indoors behind a window is not recom-mended as it will reduce the output considerably.
• If required, you can connect any 12V load or appliances to the load terminals of the solar controller (“+” to “+”, “-” to “-”), for example 12V light bulbs. Ensure that the total current drawn by the load does not exceed 10A.
• Your 12V appliances can be connected directly to your battery but discharge protection function of controller will be unavailable.

Data Sheet

10W Solar Panel

Rated Power| 10W
Solar Cell| Monocrystalline
Maximum/Peak Voltage(Vmp)| 18V
Open Circuit Voltage(Voc)| 22.41 V
Short circuit current| 0.61A
Maximum current| 0.56A
Temperature range| －40℃～ +85℃
Frame| Aluminum alloy frame
Length of extension cable| 100cm(3.28ft)
Size of extension cable| 0.75mm²
Size| 337x200x18mm (13.3 x 8.1 x 0.7 in)
10A 12VCharge Controller

Nominal output(automatic identification)| 12V
Rated charge/discharge current| 10A
Battery input voltage range| 8V~16V
Max. PV open circuit voltage| 30V
Self-consumption| ≤5mA
USB Output| 5V 1.2A
Working environment temperature| -35℃ ～ +50℃
Overall dimension| 120.3x67x21.8mm
Mounting dimension| 111.5mm
Mounting hole size| Φ4.5
Terminals| 12AWG/4mmping²
Net weight| 0.10kg

Trouble Shooting

Check Wiring Terminations

• Ensure that all wire terminations are tight.
• Make sure no corrosion is present.
• Make sure wires are not chaffed.

Load Verification – Is there a voltage at the load? If there is no voltage, measure voltage on each piece of equipment leading back to the solar array until you find where the voltage and/or current drops.

• Verify all interconnections between the batteries are tight & corrosion free.

• If the battery voltage is between 11.5V and 12.6V , check the PWM controller battery status LEDs. Consult the charge controller manual for other LED colors or flashing sequences.
  Check for any signs of swelling, shrinkage, or case cracks, these may indicate battery damage.

• Solar panel – The two most important numbers when troubleshooting the array are the Short Circuit current (Isc) and Open Circuit voltage (Voc). Refer to module data sheet for both values.

• Voc – The Voc should be fairly consistent between each module in your array and should be around 20-22VDC for a 12V solar panel

• Isc – The short circuit current (Isc) should ideally be tested on a sunny day around solar noon.

•  Using a Multimeter – Once all the above issues and concerns have been addressed, it’s time to begin measuring electrical parameters (voltage and current) on each side of our electrical devices to look for any faulty components. With all components on, we will attempt to trace the voltage from the load to the solar array, through each electrical device.

  • Check voltage on load side and battery side of Load Controller
  • Check voltage of battery
  • Check voltage on battery side of charge controller
  • Check voltage on solar panel side of charge controller

Warranty

• This product is covered by a 1 year warranty provided by ECO-WORTHY Ltd. We will refound or a part of refound or replace any products with defects at our discretion.

Disclaimer

• Working with electricity and batteries can be dangerous. The information provided in this manual is for general guidance only. All work should follow the safety standards and should be carried out by an appropriately qualified person. Eco-worthy Ltd. is not responsible for any damage or injury caused by inappropriate installation or use of the product

References

• Sell Diamonds, Jewelry and Watches for the Best Price | Worthy
• Eco-Worthy: Solar Panel Kits, Lithium Battery & DIY Solar Power System – ECO-WORTHY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>