NOW Solutions 87483 Ceramic Stone Diffuser Instructions
- July 30, 2024
- now solutions
Table of Contents
87483 Ceramic Stone Diffuser
“`html
Specifications
- Model: 87483
- Colour: White
- Capacity: 100mL
- Run Time: Up to 14 hours
- Misting Modes: Continuous/Alternating/Off
- Light Mode: Warm White/Colour rotating/Fixed/Off
- Coverage: Up to 1000 sq. ft.
- Rated Power: 100 to 240V AC
How to Use
-
Check inside all pieces for all parts, remove the cover and
vapour insert. -
Fill the base with room-temperature tap water up to the max
fill line. Then add 5 to 10 drops of your essential oil. -
Replace vapour insert, check for alignment. Then, place cover
over the base. -
Plug the cable into the unit FIRST, then plug the unit into the
wall. -
Press the power icon to begin.
How it Works
Oil mist can damage wooden and painted surfaces; wipe up any
residue quickly and often.
How to Operate
Press Light Button to control light modes. Press Timer Button to
set timer options. Press Power Button to control misting modes.
How to Clean
Using a cotton swab with warm water, clean the mist disc and
sensor located at the inside bottom of the base. Use a cotton swab
and water or rubbing alcohol to clean the ceramic disc inside the
base.
Troubleshooting
| SYMPTOM | CAUSE | SOLUTION |
|---|---|---|
| No mist | Unit is out of water | Add additional water. Remove excess water and |
restart the
diffuser.
Blinking Lights| Water level indicator is dirty| Clean unit as advised, making
sure to swab the sensor/disc
inside the bottom of the unit.
FAQ
Q: How do I know when to clean the
diffuser?
A: It is recommended to clean the diffuser
every time you change oils to prevent oil residue build-up.
“`
Specifications
Model Colour Capacity Run Time Misting Modes Light Mode Coverage Rated Power
87483 White 100mL Up to 14 hours Continuous/Alternating/Off Warm White/Colour rotating/Fixed/Off Up to 1000 sq. ft. 100 to 240V AC
Troubleshooting
SYMPTOM CAUSE
SOLUTION
No mist
No mist or little mist
Unit is out of water Unit needs to be cleaned; oils are clinging to ceramic
disc or sensor
Water level is higher than max level line
Add additional water.
Clean unit as advised in instructions with clean water and clean ceramic
disc/sensor with brush or swab. Clean unit and add water ½ way to fill line
and additional water after getting mist.
Remove excess water and restart the diffuser.
Blinking Lights
Water level indicator is dirty
Unit will not stop running even though empty
Unit is out of water
No misting and unit is spraying water
Water level indicator is dirty
Clean unit as advised, making sure to swab the sensor/disc inside the bottom
of the unit.
Clean unit as advised, making sure to swab the sensor/disc inside the bottom
of the unit.
Change to warmer water.
CAUTION: Keep away from children and pets.
nowfoods.ca/essential-oils This diffuser has a 1-year manufacturer guarantee
Customer Service: 888-548-0040 DO NOT
RETURN TO RETAILER
Manufactured for NOW Foods, 60108 USA Imported & Distributed by/Importé et distribué par : Puresource, Guelph, ON N1H 6J3 Canada nowfoods.ca
Code 87483 V 2024-01-17
Essential Oil Info
NOW® Essential Oils are genuine reflections of the botanicals from which
they’re derived. When properly diffused, these botanical extracts can
encourage wellness, tranquility and even inspiration. Our essential oils are
highly concentrated and identity verified to ensure quality. We use only fresh
botanicals bursting with vitality and beneficial compounds. Strict attention
to detail, meticulous extraction methods, and a focus on safety and purity are
what set NOW® Essential Oils apart from other essential oils. We take the
necessary steps to ensure our oils are brought to you in a manner that’s
scientifically and environmentally responsible.
For more information visit nowfoods.ca/essential oils
Ceramic Stone Diffuser
Instructions & Care
MADE C L AY
CLAY MADE
ITH W
NATURAL
W ITH
N AT U R A L
nowfoods.ca
Essential Oil Recipes
Add the following oils to a diffuser and enjoy:
Balancing Blends
Daily Balance 2 drops of NOW® Geranium Oil 2 drops of NOW® Rose Absolute Oil 2
drops of NOW® Clary Sage Oil
Mind Ease 3 drops of NOW® Lavender Oil 3 drops of NOW® Peppermint Oil 3 drops
of NOW® Chamomile Oil
Purifying Blends
Purifying Room 1 drop of NOW® Tea Tree Oil 1 drop of NOW® Grapefruit Oil 8
drops of NOW® Lemon Oil
Spring Cleaning 6 drops of NOW® Lemongrass Oil 3 drops of NOW® Lemon Oil 1
drop of NOW® Eucalyptus Oil
Uplifting Blends
Orange You Delightful 2 drops of NOW® Orange Oil 5 drops of NOW® Vanilla
Concentrate Oil
Energizing 1 drop of NOW® Peppermint Oil 1 drop of NOW® Rosemary Oil 2 drops
of NOW® Cinnamon Oil
Relaxing Blends
Peace of Mind 5 drops of NOW® Lavender Oil 3 drops of NOW® Chamomile Oil
Calming Night 3 drops of NOW® Cypress Oil 3 drops of NOW® Lavender Oil 3 drops
of NOW® Marjoram Oil
Romance Blends
Love is in the Air 1 drop of NOW® Patchouli Oil 3 drops of NOW® Jasmine
Absolute Oil 5 drops of NOW® Geranium Oil
Things are Just Rosey 1 drop of NOW® Geranium Oil 10 drops of NOW® Rose
Absolute Oil
For more recipe ideas visit nowfoods.ca
Congratulations on your purchase of NOW® Solutions Ultrasonic Ceramic Stone
Oil Diffuser designed for indoor use only. Please read the instructions
carefully before using.
How it works
The NOW® Solutions Ultrasonic Ceramic Stone Oil Diffuser uses high frequency
ultrasonic technology that vibrates water inside the unit, creating an ultra
fine mist. When essential oils are added, they are immediately dispersed into
the air, providing healthful benefits and helping to ionize the air. It can be
used in a bedroom, living room, office area or anywhere you want to create a
relaxing, healthful environment.
What’s included
Cover (1pc) Vapour insert
(1pc)
How to use
1 Check inside all pieces for all parts, 3 Replace vapour insert, check
remove the cover and vapour insert.
for alignment. Then, place cover
Plug the cable into the unit FIRST,
over the base.
then plug the unit into the wall.
2 Fill the base with room-temperature tap water up to the max fill line.Then
add 5 to 10 drops of your essential oil.
Do not move once unit has been filled with water. Do not use distilled or
purified/filtered water. Do not overfill past indication line.
Essential Oil
Water
Base (1pc) Activation Buttons
Fill Line
4 Press the power icon to begin.
AC Adapter
DO NOT FILL ABOVE MAX FILL LINE. DO NOT FILL BASE UNDER RUNNING WATER.
NOTE: Oil mist can damage wooden and painted surfaces; wipe up any residue
quickly and often.
How to operate
Press Light Button 1 Turn on warm light 2 Colour rotating lights 3 Select displayed colour 4 Turn lights OFF
Press Timer Button 1 1-Hour timer 2 2-Hour timer 3 3-Hour timer 4 Power unit
OFF Press Power Button
1 Continuous operation 2 15 minute alternating
operation 3 Turn diffusing OFF
1H
2H
3H
ALT
How to clean
We recommend that you clean your NOW® Solutions Ultrasonic Ceramic Stone Oil Diffuser
every time you change oils. Oils are corrosive, and over time they build up on the ceramic
parts.To ensure long life for your diffuser, follow these simple cleaning and maintenance
instructions:
· Rinse with warm water and wipe clean as follows:
Mist Disc & Sensor
Using a cotton swab with warm water,
i. Wipe with soft damp cloth to clean.
gently clean the mist
ii. Wipe with cotton swab and rubbing
disc and sensor
alcohol when needed to break up
located at the inside
excessive oil residue
bottom of the base.
iii. Use a cotton swab and water or rubbing
alcohol to clean the ceramic disc inside
the base. *See diagram on the right.
· We recommend cleaning the unit every
time you change oils or every 2 uses. · Do not use detergents or abrasive
agents
to clean the diffuser unit.
If defective in any way, do not return this diffuser to the retailer. Please contact the manufacturer’s customer service for assistance.
Please read these instructions carefully before using. Manufacturer accepts no liability for damage caused by incorrect use of the NOW® Solutions Ultrasonic Ceramic Stone Oil Diffuser.
! Warning and cautions
No allowed actions
! Strictly prohibited
!
1. Shut off and unplug the power before cleaning
!
2. Clean the unit by rinsing the water tank and wiping it dry with a clean cloth
3. Do not use detergents or abrasive agents to clean the diffuser unit
!
4. Clean unit when changing to a different oil
!
5. Use the original adapter provided by the manufacturer
!
6. If you don’t use the device for a long time, unplug and pour water out
7. Never use steamed water or very cold water
8. Never touch water level sensor to avoid product hitting other objects
9. Never put your hand above the ceramic disc when product is working, as this could cause pain and damage to the machine
!
10. Never wrap the adaper with a cloth or paper, etc. Otherwise, it cannot dissipate heat normally and may cause deformation and burn the membrane from a short circuit. Never touch the adapter with wet hands
11. Do not use other liquids except for water & drops of essential oil
12. Do not aim the device at walls, ceilings, furniture surfaces as excess moisture could cause water damage
!
13. Do not take this unit apart exposing electrical parts
!
14. Never place on loose fabric that can block air flow and prevent the unit from misting and ventilating properly
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>