gemini GBF40WH Bladeless Hepa and Carbon Filter Tower Fan User Manual

: June 9, 2024
: gemini

gemini GBF40WH Bladeless Hepa and Carbon Filter Tower Fan User Manual

SAFETY INSTRUCTION

thank you for purchasing this fan. This product has passed through extensive quality assurance process. Every care has been taken to ensure that it reaches you in perfect condition. Attention] When using electric tools, basic safety precautions should be folowed to reduce the risk of fire,electric shock and personal injury, including the following, Read al these instructions before operating this product and keep these instructions for easy reference.

Check the voltage indicated on the rating plate. This fan is designed for a 220-240V-50-60Hz electric supply.
Do not use electrical extension cord with this fan.
Do not introduce your fingers through the front housing. Do not let children put any objects into the front housing.
Do not lot hair, curtains, tablecloth, clothes or other objects next to the air outlet of the fan. They could be sucked Into the fan, causing damage or injuries.
Do not use the fan having a cord or a plug damage, operation failure the fan is fallen or have been damage by any method.
Periodically check the electric cable of this fan. If the electric cable Is damaged, it must be replaced by the After-sales Service Center or by a sim far qualified person in order to avoid a danger. 7
Do not use this fan outdoor.
Do not use this fan in a damp area such as bathroom.
Do not use this fan on a window.
Do not use this fan with any semi-conductors speed control.
The fan should not be operated without a base nor used laying on its side.
Do not cover the electrical cord by any objects. Do not overlay the cord with file covers or such element. Place the cord in an area where there are not any risk to stumble over it.
The fan must be unplugged when not in-use. To unplug the fan, all the switches must be on the position ‘OFF”, and then the plug could be disconnected.
Do not operate the fan in an area where gasoline painting or such flammable liquids is used or stocked.
Use this fan only as it is describe in this manual,
Do not try to disassemble this fan and fix it by user, If you need maintenance, please send back the fan to our After-sales Service Center,
AI componets of this fan must not be replaced by the user. 1
If the supply cord is damaged, It must be replaced by the After-sales Service Center or a similarly qualified person in order to avoid a hazard.
. The safety standard of this fan is without earth connection.
Keep this fan out of reach from Children or infirm persons and do not let them use the fan without supervision.

WARNING:

1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. 2. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervised.

NOTE:

There are no serviceable parts in this unit. Do not attempt to disassemble. WARNING: Never use this fan with any solid-state speed control device. Doing so will create fire and/or shock hazards.

MAIN PARTS

PRODUCT SIZE

USING GUIDE

After taking the bladeless fan out of the package, take out the protective piece of the adapter, place the fan on a stable ground or desktop, insert the output plug of the power adapter (DC24V 1.5A) into the power input interface at the bottom of the fan head, and then The adapter input plug plugs into a household electrical outlet.
The fan enters the standby state, and the display lights up ” – – “. Power on the fan by touching the power button on the control panel, or using the remote control to for operation.

The power interface of the fan is located on the side of the bottom turntable; the fan is worked with 8 speeds when power on by default .

OPERATION GUIDE

Pay attention!
Do not forcibly turn the fan’s oscillation angle or external force to hinder its normal oscillation process, otherwise it may damage the mechanical structure of the fan and affect its use.

1.POWER ON/OFF

After plug on press the Power button“ ”, the machine will enter the normal work model. Press the Power button “ ” again, the machine will enter the standby state.

2、ADJUST THE WIND SPEED

After power on, press the Speed button “ ” or press the “ +/- ”of the remote control to adjust the speed, the display will show corresponding speed. When it is in the highest speed “12 ”, if you touch the speed button “ ” again, the speed will continue to cycle from speed 1. The speed will not cycle during remote control operation.

3、MODE SETTING

Press the Mode “ ” on machine or remote control to set the wind mode, wind model will change according to Normal wind-Nature wind-Sleeping wind.
Nature wind mode: This icon of Nature wind “ ” will light up, the display screen will show “ ” , the wind speed simulates the natural wind, and the change of large and small winds.
Sleeping wind mode: the icon of the sleeping mode “ ” will light up, the display screen will show “ ” , the wind speed will be changed to suitable for sleep.

4、TIMER SETTING

Press the Timer button “ ” for timer adjustment during the machine is working, the “ h ” will flash and display the timer time. The digit will will flash 5S means the setting the timer successfully and the timer will start running. The timer setting can be up to 12 hours. When “ 00 ” hours are displayed, the timer function is turned off.

5、OSCILLATION SETTING

Press the Oscillation button “ ” start the oscillation funtion, the max scillation angle can be 120°. Each time touching the Oscillation button “ ” , the oscillation angle will be 60°, 90°, and 120° in turn, until the oscillation function is turned off.

Pay attention!

Do not forcibly turn the fan’s oscillation angle or external force to hinder its normal oscillation process, otherwise it may
damage the mechanical structure of the fan and affect its use.

6、DISPLAY LIGHT STATUS

In normal wind and natural wind modes, if there is no operation for 60 seconds, the screen brightness will be reduced by half, and if there is no operation for 10 minutes, the screen will turn off. In sleeping wind mode, if there is no operation for 30s, the screen brightness will be reduced by half, and if there is no operation for 5 minutes, the screen will automatically turn off.

MAINTENANCE

Pay attention!
Before cleaning and maintenance, the power supply must be disconnected, the whole machine should not be immersed in water, and the machine should not be sprayed.

It is recommended to clean and maintain the machine every 3 to 4 weeks to ensure that the fan works more efficiently and the air outlet is cleaner.
Remove the filter of the machine, use a vacuum cleaner or a dry brush for cleaning, use a low-humidity dish towel to wipe the dust on the place where the filter is placed, put the filter back and cover it after drying.
In order to ensure the purification effect, the filter can be replaced regularly depending on the actual situation, and the customer service staff can be consulted for the purchase of special accessories.
When cleaning the appearance of the product, please wipe the product with a soft and clean cloth. To remove stubborn stains, be sure to use a mild and neutral detergent. After cleaning, wait for the surface to dry before turning it on.

Pay attention!

Before cleaning and maintenance, the power supply must be disconnected, the whole machine should not be immersed in water, and the machine should not be sprayed.