TITAN LIFTS WB-400 Factory Reset User Guide
- June 14, 2024
- TITAN LIFTS
Table of Contents
WB-400 Factory Reset.
Turn machine ON. There should be no tire/rim on shaft.
Press the following sequence of buttons to do a Factory Code Reset.
-
Press Home button
-
Press DIS + button
-
Press Home 2 Times
-
Rotate shaft until “111” appears in the right window.
-
Hit “C” button.
-
Rotate shaft until “55” appears in the right window.
-
Hit “C” button.
-
Rotate shaft until “111” appears in the right window.
-
Hit “C” button.
-
Press Home key
-
Press DIS + repeatedly until “46” appears in the left window.
Press home key.
-
Pull Distance Gauge out and put to Flange – note distance on distance gauge. The number on the right must match the number noted on the distance gauge.
-
Change the number on the right by pressing DIS + or DIS –.
The number on the right must match the number noted on the distance gauge. -
Then press Home key.
-
Use DIS + or DIS – to change the number on the right to show 005 (in the unit of Gram) or 007 (in the unit of Ounce)
-
Press Home key.
-
Press home key again
You will now hear a series of Beeps -
Turn the machine off and back on.
YOU HAVE COMPLETED FACTORY RESET
Documents / Resources
|
TITAN LIFTS WB-400 Factory
Reset
[pdf] User Guide
WB-400 Factory Reset, WB-400, Factory Reset, Reset
---|---