KOSUMOSU 20210924 Digital LED Wall Clock User Manual

20210924 Digital LED Wall Clock
User Manual

20210924 Digital LED Wall Clock

Thanks for choosing our product, Please read the user manual carefully before using the led clock

Power Supply

• This LED clock needs a plug in USB power supply (5V/1A).
• AC adapter is NOT included, please use a compliant adapter.

Hang on the wall

• This Led clock can be hung up on the wall with included installation kit.

Package content

Remote Control Buttons

Function

Time/Date/Year setting

1. Press the “CLOCK” button to enter the time setting, the Hour numbers start to flash, then press the button to adjust the hour, after that press the  button and skip to set the minutes.
2. Adjust the minutes via the (v button, finally, press the “CLOCK” button to confirm time setting and skip to Date setting.
3.  Then adjust the month and day numbers via these 4 arrow buttons as above, and press “CLOCK” button to confirm date setting and skip to Year setting.
4.  Adjust the Year numbers via the button, finally press the “CLOCK” button to confirm setting and back to time mode.

12/24 Hours System

• Press button to switch 12/24-hour time system.

Seconds flashing

• Press the button to turn on/off the two flashing seconds points between the hours and minutes.

Alarm setting

1. Press “ALARM” button twice to enter Alarm setting, press  button to switch the Hour or Minute setting, then adjust datas via button.
2.  Press “ALARM” button to confirm the alarm time.
3.  Press button to set the alarm clock “ON” or “OFF”.
4. Finally press the “ALARM” button to confirm and back to clock mode.

In clock mode, press “ALARM” button, it’ll show the preset alarm time, or if the alarm was turned off, it’ll show “OFF”.
Snooze

• This LED clock was preset Snooze function, which means the bell will ring 3 times at 5 minutes intervals, and 1 minute per ring.
• When the bell rings, you can press the “ALARM” button to pause ringing and delay the alarm for 5 minutes.
• When the bell rings, you may press any buttons besides “ALARM” button to stop ringing right away.
• If you want to close the alarm entirely, please set the alarm OFF as above Alarm Setting descriptions.

Brightness setting (Brightness Dimming)

• Press the “BRIGHT” button to switch the brightness dimming in sequence for” High – Medium- Low- Auto “,
• There are 8 levels of brightness dimming for “Auto” mode, which will be dimming automatically according to the ambient light via the built-in light sensor.
• Press the “Display on/off” button @ to turn on or off the LED light.(* It is NOT equivalent to shutting down the clock!)

Temperature display
Press “TEMP” button to show the Temperature in C for 5 secs., or press it again to show it in F for 5 secs., then back to clock mode automatically.
Loop display
Press the button to turn on/off the Loop Display of the “Time”, “Temperature” and “Date”.

Specifications

Input: 5V/1A (*AC adapter is not included)
Weight: 340g
Product Dimensions: 15.0 x 5.1 x 0.9 inches 381 x 129.5 x 22.9 mm
Warning

• This LED clock needs a plug in USB power supply.
• ONLY use a safe and compliant power adapter(5V/1A), so that the power supply voltage is stable and the clock works normally.

Any problem, please
upport@sz-krs.com.cn
with order number and detailed problem

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>