NOMVDIC L500 RGB Triple Laser Projector User Guide

: June 14, 2024
: NOMVDIC

Table of Contents

NOMVDIC L500 RGB Triple Laser Projector
Getting Started
Initial Setup
Using L500 as a Projector
Wireless Projection
Cable Connected Projection
Using L500 as a Bluetooth Speaker
FAQs
Limited Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NOMVDIC L500 RGB Triple Laser Projector

Compliance info

FCC Compliance Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Industry Canada ICES-003 Compliance : CAN ICES-003(B) / NMB-003(B)

CE Conformity for European Countries
The device complies with the EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, Ecodesign Directive 2009/125/EC and Radio Equipment Directive 2014/53/EU. The full Declaration of Conformity can be found at the following website: http://www.nomvdic.io/

Declaration of RoHS2 Compliance
This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC).

Getting Started

What’s Included NOMVDIC L500 RGB Triple Laser Projector
1

Overview

Power
IR Receiver
Lens
Adjustment Foot
Touch Keypad
Harman Kardon Speaker

Remote Control

Power
Focus
Settings
OK/Up/Down/Left/Right
Return
Home
Increase volume
Play/Pause (Only supports built-in media player.)
Decrease volume
Mute

Bluetooth Remote Control

Step 1. Go to Apps Center > RC BT Pairing
Step 2. Press and hold the Return and Menu buttons simultaneously for 3 seconds
Step 3. Pairing successful

NOMVDIC Remote Control App

Step 1. Download the NOMVDIC Remote Control app onto your smartphone
Step 2. Connecting your phone and the projector to the same Wi-Fi Network
Step 3. Open the NOMVDIC Remote Control app and select the projector (NOMVDIC XXXX)

Initial Setup

Turning on L500

Step 1. Connect the power cord to L500
Step 2. Press the Power Key
Step 3. A solid green light will stay on after the startup.

Using L500 as a Projector

Adjusting the Projected Image
The L500 comes with auto-focus and auto keystone correction. Place the projector to where it best fits your use scenario. Note that there should be at least 20 inches (50cm) between the side ventilation fan and any surface to keep the projector cool.

4 Corner Adjustment
The auto keystone feature will automatically correct the vertical and horizontal keystones. Alternatively, you can go to Home > Settings > Basic Setting > 4 Corner Adjustment to adjust the projected image. You may manually adjust keystone to get the most precise adjustment.

Fine-Tuning the Image Clarity
The Auto Focus will automatically adjust the image clarity. Alternatively, you can go to Home > Settings > Basic Setting > Auto Focus to adjust the projected image. You may manually adjust keystone to get the most precise adjustment.

Wireless Projection

Via Streaming Devices

Step 1. Connect your TV dongle (e.g., Fire TV Stick, Roku Stick) to the projector.
Step 2. On the Home page, select HDMI on the left column.
Step 3. Select the streaming service you wish to use.

Via NOMVDIC AppStore

Step 1. Go to Home > Apps Center > App Store
Step 2. Choose the app you wish to download (e.g., Netflix, SmartTube)
Step 3. After installation, log in with your account and password (a mouse or remote app is required when log in)

Via USB Flash Drive

Step 1. Connect your USB flash drive to the USB-A port.
Step 2. Go to Home > File Management.
Step 3. Choose the file you wish to open.

Cable Connected Projection

Via HDMI Cable

Step 1. Connect one end of the HDMI cable to your device (e.g., PC, laptop)
Step 2. Connect the other end of the HDMI cable to the HDMI port on L500
Step 3. In Home, select HDMI on the left column

Via USB-C Cable

Step 1. Connect one end of the USB-C cable to your device (e.g., mobile phone, Nintendo Switch).
Step 2. Connect the other end of the USB-C cable to the USB-C port on L500.
Step 3. In Home, select USB C on the left column.

Shutting Down the Projector

Press Power Button on the remote control, choose Turn Off, or press Power Button on the projector to turn off the projector.

Using L500 as a Bluetooth Speaker

How to pair L500 with your mobile phone for the first time

Step 1. Go to Home > Bluetooth.
Step 2. Select Bluetooth Pairing. A sound effect will be audible upon pairing.
Step 3. On your phone, choose NOMVDIC L500. Upon successful connection, another sound effect will be audible.

After the first successful pairing, you can turn on the Bluetooth speaker mode by going to Home > Bluetooth, and selecting Bluetooth Speaker. Your device will pair with L500 automatically.

FAQs

How do I screen mirror my mobile device content to my L500?
To do screen mirroring, ensure your device is connected to the same network as the projector. It is recommended to use a 5GHz Wi-Fi network for best results.

For iOS

Step 1. Access the drop-down control menu.
Step 2. Select the “Screen Mirroring” icon.
Step 3. Choose “NOMVDIC XXXX”.

For Android

Step 1. Download and install the “Google Home” application and open it.
Step 2. Pull-to-refresh the app and wait for 30 seconds.
Step 3. “NOMVDIC XXXX” will now be visible, select it.

It’s recommended to use the APP casting function if Google Home does not work (e.g., YouTube).

Step 1. Open the YouTube App on your mobile device and tap on the Cast Icon.
Step 2. On the slide-up menu that appears, select “NOMVDIC XXXX”.

How can I adjust the L500’s color settings?

Step 1. Connect one end of an HDMI cable to the HDMI port of your video device.
Step 2. Press the Settings button on the remote control.
Step 3. Use the Left / Right buttons to enter the sub-menu and adjust the Color Mode.
Step 4. Use the Up / Down buttons to select a menu and adjust the Brightness/Contrast/Color

Temp./Gamma settings.

What type of laser technology does the L500 use?
The L500’s RGB tri-laser projector technology delivers a bright and wide color gamut offering the BT2020 color gamut which performs better than the REC709 standard color.

Limited Warranty

What does the warranty cover?
NOMVDIC™ warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, NOMVDIC™ will, at its sole option, repair or replace the product with a similar product. Replacement Products or parts may include remanufactured or refurbished parts or components. The replacement unit will be covered by the balance of the time remaining on the customer’s original limited warranty. NOMVDIC™ provides no warranty for any third-party software whether included with the product or installed by the customer, installation of any unauthorized hardware parts or components.

How long is the warranty effective?

NOMVDIC ™ Projector : 1-year Limited Warranty
Remote Control : 6-month Limited Warranty
AC Adapter : 6-month Limited Warranty

How to get service?
For information on obtaining warranty service, please contact hello@nomvdic.io. Please be prepared to provide the below information when obtaining for service: