NOMVDIC P1000 4K UHD Home Projector User Guide
- June 13, 2024
- NOMVDIC
Table of Contents
P1000
Quick Start Guide
Compliance info
FCC Compliance Statement
This device complies with part 15 of FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Industry Canada ICES-003 Compliance : CAN ICES-003(B) / NMB-003(B)
CE Conformity for European Countries
** The device complies with the EMC Directive 2014/30/EU, Low Voltage
Directive 2014/35/EU,
Ecodesign Directive 2009/125/EC and Radio Equipment Directive 2014/53/EU. The
full Declaration of
Conformity can be found at the following website: http://www.nomvdic.io/
Declaration of RoHS2 Compliance**
This product has been designed and manufactured in compliance with Directive
2011/65/EU of the European Parliament and the Council on restriction of the
use of certain hazardous substances in electrical and electronic equipment
(RoHS2 Directive) and is deemed to comply with the maximum concentration
values issued by the European Technical Adaptation Committee (TAC).
Getting Started
What’s Included
Overview
- IR Sensor
- Lens
- Harman Kardon Speakers
- Handle
- Keypad
- Power Key & Power Indicator
Remote Control
- Power
- Focus
- Settings
- OK/Up/Down/Left/Right
- Return
- Home
- Increase
- Play/Pause (Only supports built-in media player.)
- Decrease
- Mute
Remote Control
The remote control uses an IR sensor. For more stable control, you can follow
the below instructions to pair the remote control via Bluetooth.
Step 1. Go to Apps Center > RC BT Pairing
Step 2. Press and hold the Return and Menu buttons simultaneously for 3
seconds
Step 3. The blue light on the remote control indicates Bluetooth pairing
successful
NOMVDIC Remote Control App
Alternatively, you can follow the below instruction to use your smartphone to
control the projector:
Step 1. Download the NOMVDIC Remote Control app onto your smartphone
Step 2. Connecting your phone and the projector to the same Wi-Fi Network
Step 3. Open the NOMVDIC Remote Control app and select the projector
(NOMVDIC XXXX)
Setting Up P1000
Powering On/Off
Powering On the P1000
Connect the power cord to the P1000, and press the power button. A solid green
light will stay on after the startup.
Powering Off the P1000
Press the power button, and a pop-up window will appear. Press the power
button again to turn off the projector. Alternatively, you can press the power
button on the remote control to turn off the P1000.
Adjusting the Projected Image
Placing the Projector
The P1000 comes with auto-focus and auto keystone correction. Place the
projector to where it best its your use scenario. Note that there should be
at least 20 inches (50cm) between the side ventilation fan and any surface to
keep the projector cool.
4 Corner Adjustment
The auto keystone feature will automatically correct the vertical and
horizontal keystones. Alternatively, you can go to Home > Settings > Basic
Setting > 4 Corner Adjustment to adjust the projected image.
Fine-Tuning the Image Clarity
The auto focus feature will automatically adjust image clarity. You can also
press and hold the focus button for 3 seconds on the remote control to
manually adjust the image focus.
Wireless Projection
Via Streaming Devices
Step 1.| Connect your streaming device (e.g., Fire Stick, Roku Stick, etc.) to
the projector
---|---
Step 2.| On the Home page, select HDMI on the left column
Step 3.| Select the streaming service you wish to use
Via USB Flash Drive
| Step 1. | Connect your USB flash drive to the USB-A port |
|---|---|
| Step 2. | Go to Home > File Management |
| Step 3. | Choose the file you wish to open |
Cable Connected Projection
Via HDMI Cable
| Step 1. | Connect one end of the HDMI cable to your device (e.g., PC, laptop) |
|---|---|
| Step 2. | Connect the other end of the HDMI cable to the HDMI port on P1000 |
| Step 3. | In Home, select HDMI on the left column |
Via USB-C Cable
Step 1.| Connect one end of the USB-C cable to your device (e.g., mobile
phone, Nintendo Switch)
---|---
Step 2.| Connect the other end of the USB-C cable to the USB-C port on P1000
Step 3.| In Home, select USB C on the left column
FAQs
How do I AirPlay/Screen Mirroring the content on my phone to P1000?
To connect to AirPlay or screen mirror, ensure your device is connected to the same network as the projector. It is recommended to use a 5GHz Wi-Fi network for best results. For iOS Step 1. Access the drop-down control menu Step 2. Select the “Screen Mirroring” icon Step 3. Choose “NOMVDIC XXXX”
For Android
Step 1. Download and install the “Google Home” application and open it Step 2. Pull to refresh the app and wait for 30 seconds Step 3. “NOMVDIC XXXX” will now be visible, select it Some Android devices support direct “Casting”. If your device does, go to the Casting feature and choose “NOMVDIC XXXX” from the list of available devices. Please note that AirPlay and Screen Mirroring are no longer supported by major streaming services such as Netflix and Disney+.
How do I optimize the P1000 for the best gaming experience?
To enable Ultra Fast Input: Step 1. Press the menu button on the remote control Step 2. In Menu > Advanced, go to Ultra Fast Input and press to enable. Please note that when enabled, the following settings (if applicable) will return to factory preset values: Aspect Ratio, Zoom, OverScan, Keystone, 4 Corner, Warping.
How do I connect the P1000 to my speaker?
For an advanced audio experience, you can connect the P1000 to your speaker via Bluetooth following the below instructions: Step 1. In Home > Bluetooth, select Bluetooth out Step 2. Set your Bluetooth speaker to pairing mode Step 3. Find your speaker in the device list and press OK to connect Note: If you wish to switch to a different video source, make sure you disconnect by selecting the Bluetooth speaker on the device list to forget the current device.
How do I contact NOMVDIC?
You can contact us via hello@nomvdic.io. Our Customer Success team will respond to your inquiries within 24 hours on business days.
Limited Warranty
What does the warranty cover?
NOMVDIC™ warrants its products to be free from defects in material and
workmanship during the warranty period. If a product proves to be defective in
material or workmanship during the warranty period, NOMVDIC™ will, at its sole
option, repair or replace the product with a similar product. Replacement
Products or parts may include remanufactured or refurbished parts or
components. The replacement unit will be covered by the balance of the time
remaining on the customer’s original limited warranty. NOMVDIC™ provides no
warranty for any third-party software whether included with the product or
installed by the customer, installation of any unauthorized hardware parts or
components.
How long is the warranty effective?
NOMVDIC ™ Projector : 1-year Limited Warranty
Remote Control : 6-month Limited Warranty
AC Adapter : 6-month Limited Warranty
How to get service?
For information on obtaining warranty service, please contact
hello@nomvdic.io.
Please be prepared to provide the below information when obtaining for
service:
- The serial number of the product
- A copy of the dated sales slip
- Your name
- Email address
- Phone number
- Your ship-to address
- A description of the problem you are experiencing
If you need any further assistance, please contact us at
hello@nomvdic.io.
For the latest information on the product, visit
hello.nomvdic.io.
Home www.nomvdic.io
Contact Us hello@nomvdic.io
Knowledge Base hello.nomvdic.io
@nomvdic.io
@nomvdic.io
@nomvdic_usa
https://me-qr.com/12887344
References
- Support : NOMVDIC Customer Support
- NOMVDIC - Expand Your Horizons of Home Entertainment – NOMVDIC Corporation
- NOMVDIC - Expand Your Horizons of Home Entertainment – NOMVDIC Corporation