NOMVDIC P1000 4K Projector User Guide
- June 14, 2024
- NOMVDIC
Table of Contents
- Compliance info
- Getting Started
- Remote Control
- Setting Up P1000
- FAQs
- How do I AirPlay/Screen Mirroring the content on my phone to P1000?
- How do I optimize the P1000 for the best gaming experience?
- How do I connect the P1000 to my speaker?
- How do I contact NOMVDIC?
- Limited Warranty
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
**NOMVDIC P1000 4K Projector User Guide
**
Compliance info
FCC Compliance Statement
This device complies with part 15 of FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Industry Canada ICES-003 Compliance : CAN ICES-003(B) / NMB-003(B)
CE Conformity for European Countries
The device complies with the EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, Eco-design Directive 2009/125/EC and Radio Equipment Directive 2014/53/EU. The full Declaration of Conformity can be found at the following website: http://www.nomvdic.io/
Declaration of RoHS2 Compliance
This product has been designed and manufactured in compliance with Directive
2011/65/EU of the
European Parliament and the Council on restriction of the use of certain
hazardous substances in
electrical and electronic equipment (RoHS2 Directive) and is deemed to comply
with the maximum
concentration values issued by the European Technical Adaptation Committee
(TAC).
Getting Started
What’s Included
Overview
- IR Sensor
- Lens
- Harman Kardon Speakers
- Handle
- Keypad
- Power Key & Power Indicator
Remote Control
- Power
- Focus
- Settings
- OK/Up/Down/Left/Right
- Return
- Home
- Increase
- Play/Pause (Only supports built-in media player.)
- Decrease
- Mute
The remote control uses an IR sensor. For more stable control, you can follow the below instructions to pair the remote control via Bluetooth.
Step 1. Go to Apps Center > RC BT Pairing
Step 2. Press and hold the Return and Menu buttons simultaneously for 3
seconds
Step 3. The blue light on the remote control indicates Bluetooth pairing
successful
NOMVDIC Remote Control App
Alternatively, you can follow the below instruction to use your smartphone to control the projector:
Step 1. Download the NOMVDIC Remote Control app onto your smartphone
Step 2. Connecting your phone and the projector to the same Wi-Fi Network
Step 3. Open the NOMVDIC Remote Control app and select the projector
(NOMVDIC XXXX)
Setting Up P1000
Powering On/Of
Powering On the P1000
Connect the power cord to the P1000, and press the power button. A solid green
light will stay on after
the startup
Powering Off the P1000
Press the power button, and a pop-up window will appear. Press the power
button again to turn off
the projector. Alternatively, you can press the power button on the remote
control to turn off the P1000.
Adjusting the Projected Image
Placing the Projector
The P1000 comes with auto-focus and auto keystone correction. Place the projector to where it best fits your use scenario. Note that there should be at least 20 inches (50cm) between the side ventilation fan and any surface to keep the projector cool.
4 Corner Adjustment
The auto keystone feature will automatically correct the vertical and horizontal keystones. Alternatively, you can go to Home > Settings > Basic Setting > 4 Corner Adjustment to adjust the projected image.
Fine-Tuning the Image Clarity
The auto focus feature will automatically adjust image clarity. You can also press and hold the focus button for 3 seconds on the remote control to manually adjust the image focus.
Wireless Projection
Via Streaming Devices
Step 1. Connect your streaming device (e.g., Fire Stick, Roku Stick,
etc.) to the projector
Step 2. On the Home page, select HDMI on the left column
Step 3. Select the streaming service you wish to use
Cable Connected Projection
Via HDMI Cable
Step 1. Connect one end of the HDMI cable to your device (e.g., PC,
laptop)
Step 2. Connect the other end of the HDMI cable to the HDMI port on P1000
Step 3. In Home, select HDMI on the left column
Via USB-C Cable
Step 1. Connect one end of the USB-C cable to your device (e.g., mobile
phone, Nintendo Switch)
Step 2. Connect the other end of the USB-C cable to the USB-C port on
P1000
Step 3. In Home, select USB C on the left column
FAQs
How do I AirPlay/Screen Mirroring the content on my phone to P1000?
To connect to AirPlay or screen mirror, ensure your device is connected to the same network as the projector. It is recommended to use a 5GHz Wi-Fi network for best results. For iOS Step 1. Access the drop-down control menu Step 2. Select the “Screen Mirroring” icon Step 3. Choose “NOMVDIC XXXX” For Android Step 1. Download and install the “Google Home” application and open it Step 2. Pull to refresh the app and wait for 30 seconds Step 3. “NOMVDIC XXXX” will now be visible, select it Some Android devices support direct “Casting”. If your device does, go to the Casting feature and choose “NOMVDIC XXXX” from the list of available devices. Please note that AirPlay and Screen Mirroring are no longer supported by major streaming services such as Netflix and Disney+.
How do I optimize the P1000 for the best gaming experience?
NOMVDIC introduced Ultra Fast Input to enhance gaming performance. Ultra Fast Input improves frame rate while playing a game. As such, a quick response time in the 1080p,1440p, and native timing can be achieved. To enable Ultra Fast Input: Step 1. Press the menu button on the remote control Step 2. In Menu > Advanced, go to Ultra Fast Input and press to enable. Please note that when enabled, the following settings (if applicable) will return to factory preset values: Aspect Ratio, Zoom, OverScan, Keystone, 4 Corner, Warping.
How do I connect the P1000 to my speaker?
For an advanced audio experience, you can connect the P1000 to your speaker via Bluetooth following the below instructions: Step 1. In Home > Bluetooth, select Bluetooth out Step 2. Set your Bluetooth speaker to pairing mode Step 3. Find your speaker in the device list and press OK to connect Note: If you wish to switch to a different video source, make sure you disconnect by selecting the Bluetooth speaker on the device list to forget the current device.
How do I contact NOMVDIC?
Limited Warranty
What does the warranty cover?
NOMVDIC™ warrants its products to be free from defects in material and
workmanship during the warranty period. If a product proves to be defective in
material or workmanship during the warranty period, NOMVDIC™ will, at its sole
option, repair or replace the product with a similar product. Replacement
Products or parts may include remanufactured or refurbished parts or
components. The replacement unit will be covered by the balance of the time
remaining on the customer’s original limited warranty. NOMVDIC™
provides no warranty for any third-party software whether included with the
product or installed by the customer, installation of any unauthorized
hardware parts or components
How long is the warranty effective?
NOMVDIC ™ Projector : 1-year Limited Warranty
Remote Control : 6-month Limited Warranty
AC Adapter : 6-month Limited Warranty
How to get service?
For information on obtaining warranty service, please contact
hello@nomvdic.io.
Please be prepared to provide the below information when obtaining for
service:
- The serial number of the product
- A copy of the dated sales slip
- Your name
- Email address
- Phone number
- Your ship-to address
- A description of the problem you are experiencing
@nomvdic.io
@nomvdic.io
@nomvdic_usa
If you need any further assistance, please contact us at
hello@nomvdic.io.
For the latest information on the product, visit
hello.nomvdic.io.
Home www.nomvdic.io
Contact Us hello@nomvdic.io
Knowledge Base hello.nomvdic.io
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>