EKLEVOR VC626 Wireless Bluetooth Microphone User Manual

**EKLEVOR VC626 Wireless Bluetooth Microphone

**

Welcome to product

Thank you for showing your confidence in us by purchasing the VC626. This manual contains important instructions for setting up and operating your equipment. Please take a few minutes to read the instructions below carefully before operating the equipment. Please keep the manual for future reference. Please fully charge the battery when using this product for the first time.

Package Contents

1. Wireless Karaoke Microphone

2. Charging cable (Type-C to USB)

3. Audio cable for Recording a song/live streaming (Type-C to 3.5mm)

4. User Manual

Warranty:

Thank you for using EKLEVOR Products, all EKLEVOR product comes with 18-month warranty from the day of purchase.
If you have any product problems, please feel free to contact us.

Contact:
E-mail: KeteyiCustomerService@outlook.com

Specification

Pickup: Capacitive type
Reverb mode: echo sound reverb
TF card playback format: MP3, wma, wav
Transmission distance: < 10 m (barrier free distance)
Operating frequency: 2.402g-2.480ghz
Transmitting power: 4dB
Receiving sensitivity: – 85dB
Signal to noise ratio: ≤ 80dB
Distortion: ≤ 1 %-2%
Output power: 5W
Loudspeaker specification: 57mm 40 /5W
Frequency Response: 100Hz-10KHz
Charging power supply :5V 1A
Charging time: about 3 hours
Playback time: about 5 hours
Battery capacity: 1200mAh
Product size: 108x215x39mm
Audio input: Bluetooth/ TF/aux connection

Note

1. Please fully charge the battery when using this product for the first time.
2. The wireless Bluetooth connection distance between mic and phone should be within 10 meters, without obstacles.
3. Bluetooth has memory function, the phone connected before will auto reconnect to the mic that has entered Bluetooth mode. So if you want to connect your mic to the other phone, please turn off Bluetooth of the previous phone that is within the mic’s Bluetooth range.
4. Duet function requires 2 mies, please enjoy duet fun by buying 2 mies. In duet mode, the distance between 2 mies should not exceed 6m (better to be within 4 m) without obstacles. After turning on duet button, please wait about 4s to let both mies search and connect each other.
5. This is a professional unidirectional microphone that only picks up sound from the top of the mic, none from side. Please talk to the middle of mic top to get pure and clear target sound source without any ambient noise.
6. When you use it as a speaker for listening to music, please turn off MIC volume.
7. About the function of canceling the original sound: when the accompaniment also has vocals, the cancel effect is not obvious.

Function diagram

Functional operation description

Key| Long press| Short press| Double-click| Double sing
---|---|---|---|---
| ECHO+| Reduce vocals| |
| ECHO-| Voice Changer| |
| ECHO-| Microphone volume+| |
| Music sound –| Microphone volume-| |
| ON/OFF| Play/ pause| Double sing| Mode switching

Modes
Bluetooth mode, TF card mode and Audio mode. The default mode is Bluetooth connection when power on. Triple-click   to switch modes when inserting a TF card or audio cable.

Voice Changer

The Microphone has seven magic sound effects, which can be switched by one- click . Magic Sound Modes:

1. Popular Mode,
2. Music Mode,
3. Male Mode,
4. Female Mode,
5. Kid Mode,
6. Monster Mode,
7. KTV Mode,

Double sing

Turn on both of microphone at the same time, double-click the double sing button of one of them to search the Bluetooth of the microphone; when one of the microphone’s indicator lights on, the Bluetooth connects, then you can double sing.

Reduce vocals

Cancel the original sound: when microphone is working, one-click the to switch between original vocals and accompaniment vocals.(Note: when the accompaniment also has vocals, the cancel effect is not obvious.)

The operation of turning on and off Press the on/off key for 3 seconds to turn on the Bluetooth loudspeaker, the blue indicator light will flash, and send out the start up indicate voice, that means the device has turned on.
After using the product, press the on/off key for 3 seconds to close the Bluetooth loudspeaker, and the shutdown prompt tone will be send out.

Bluetooth music function
After the loudspeaker is turned on, the blue indicator light flashes quickly, and the loudspeaker enters the search matching status. At this point, turn on the Bluetooth function of the mobile phone, search for the Bluetooth device … When the name D8 appears, click to enter matching. After the matching is succeeded, there will be a prompt tone, and then turn on the mobile phone player to play the song. If you want to sing without the original, just press “reduce vocals” to switch the singing accompaniment.

TF Card music function
In the state of power-on , insert TF memory card into the TF card slot of the Bluetooth loudspeaker (pay attention to the direction) which will send out a “beep” prompt sound, indicating that it has entered the TF card playing mode, and the loudspeaker will play the songs in the TF card at this time.

Tip: When listening to songs in any mode of the Bluetooth microphone, in order to avoid reverberation of microphone, please adjust MIC volume to the minimum, and songs can be played normally after opening the mobile phone music player.

External loudspeaker and headphones
This microphone can be connected with earphones and loudspeaker through 3.5mm port. Easy to operate, just need connect to the microphone 3.5mm output port.

Recording songs by Karaoke

Bluetooth karaoke and recording
Apple or Android mobile phones can download Karaoke software for installation, and properly adjust the treble, bass and reverberation to achieve the best effect. Can implement Karaoke through open the Karaoke software of mobile phone and click the Karaoke accompaniment. After recording, it required to adjust the accompaniment sound of the software to the minimum before saving and releasing, so as to avoid noise caused by repeated accompaniment. The Bluetooth karaoke record by the voice from the air to the Microphone of mobile phone, and the sound quality will be reduced. In order to achieve the best recording effect, please use the recording cable to implement karaoke recording.

karaoke and recording by the Recording cable
In the state of power-on, connect the 3.5mm audio plug of the recording cable to the audio port of the mobile phone, then insert the Type-c plug into the port at the bottom of the loudspeaker, open the karaoke software of the mobile phone, adjust the accompaniment volume of the mobile phone player in a proper way, and then record songs through the recording cable. Audio cable recording mode need to disconnected or turned off Bluetooth of mobile phone.

Charging
Insert the USB cable into the standard USB power adapter (5V1A), and the Type-c plug of the charging cable into the charging interface of the loudspeaker. If the red indicator lights on the left side of the USB, it indicates the product starts to charge; and the red indicator lights off indicating fully charge, you can break the connection between the charger and the loudspeaker.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>