Artsun Enterprise VIBE Bluetooth Speaker User Manual
- June 6, 2024
- Artsun Enterprise
Table of Contents
VIBE BLUETOOTH SPEAKER USER’S MANUAL
MODEL: Vibe VERSION: V-01
Introduction:
Thank you for choosing the Vibe Bluetooth speaker. This product supports
smartphones, tablets, laptops, and other Bluetooth-enabled devices.
This product is tested to be IPX7 waterproof and dust-proof. It can work under
0.15-1 meter underwater for 30 minutes, and it is not affected by water
splashes or rain in a limited time. Please note the Bluetooth speaker is not
waterproof when the silicone cover is opened. Please ensure that the silicone
cover is closed under wet and splashing conditions.
Description
- Pulsing Light
- Microphone
- TWS Mode Button
- Light Mode Button
- Power ON/OFF Button
- Volume Down-/ Previous Track Button
- Volume UP+/ Next Track Button
- AUX-IN Port
- Reset Button
- Type-C Charging Port
- Type-C Charging Cable
- 3.5mm AUX IN Cable
Specification:
Bluetooth Version: 5.0
Bluetooth Receiving Range: 10M
1.75in 10W mid-bass
Product Size: 82.582.5130mm
Battery Capacity: 3.7V/3350mAh
Input: 5V/2A
Bluetooth
Pair: The device name Vibe will be displayed when it is searched and connected
for the first time. After the speaker is turned on, it will automatically
search for the last connected device. When the Bluetooth is connected, you
will be prompted. Or it will enter pairing mode when the last connected device
is not found in 10 seconds. The white LED light flashes quickly in the
disconnected state, and the speaker will automatically turn off when the
Bluetooth is not connected for 10 minutes;
Reconnect:
when the connection distance is exceeded, the speaker will reconnect
automatically when back in the connection distance within 10 minutes, and
automatically turn off after 10minutes.
Disconnect:
when connected, long-press the TWS button to clear the paired Bluetooth, you
will be prompted with “disconnected”, then the speaker will start to research
devices. Note: Clear the paired Bluetooth will not affect the TWS connection.
Button:
Power ON/OFF Button: Turn Off State: Long press 2s turn on the device, the
startup voice prompts, LED ambient light is on, the white LED light flashes
quickly to enter the Bluetooth standby state.
Turn On State: Long press 2s turn off the device, the voice prompts, and LED
ambient light is off. Incoming Call Status: Press the ON/OFF Button to answer
the call. Call Status: Press the power button to hang up the call; Music
Status: Press the power button to pause/play.
“+”: Press volume”+” button to turn up the volume, long press to switch to the
next track.
“-“: Press volume “-” button to turn down the volume, long press to switch to
the next track.
Light Mode Button: Press the light button to switch to the light mode, long
press to turn on/off the light.
TWS: After the Bluetooth is connected, press the TWS button to turn on
the TWS interconnection function to connect with the same other product. When
two identical Bluetooth products are interconnected, stereo music will be
played at the same time, one is L channel, the other is R channel; Note: The
other speaker that is to be connected with TWS can only be paired when its
Bluetooth is not connected. TWS Turn Off State: Press the TWS button,
indicating white light is on, the voice prompts the devices connected
successfully. TWS Turn On State: Press the TWS button, the indicating white
light is off, the voice prompts the devices disconnected. Power-on state: 1.
Long Press to clear the paired Bluetooth; 2. Press twice to announce the
current battery level.
AUX: Connect the speaker with a 3.5mm AUX-IN cable, the mode will be
automatically switched to AUX. You can only adjust the volume and turn the
speaker on/off under AUX mode.
Reset Button: When the speaker was crashed, please use a pointed object
to push it in the reset button to restart the speaker
Charging:
Support Type-C 5V/1A charging, the charging time is 2.5H, the red light in the
charging state is long on, and the red light is off when it is fully charged.
You will be prompted when the battery is low to 20%, please charge your
speaker when you hear the low battery prompt.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation
What’s in the box:
- Speaker
- Type-C Charging Cable
- 3.5mm AUX IN Cable
- User’s Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>