Artsun Enterprise VRR010022 FM Transmitter with Remote Control User Manual

September 7, 2024
Artsun Enterprise

Artsun Enterprise VRR010022 FM Transmitter with Remote Control

Artsun Enterprise VRR010022 FM Transmitter with Remote
Contro

Overview

Device

Device

Remote Control

Remote Control

Controls

Buttons Action Behaviors
Press Wake Up Voice Assistant
Press when calling Private Call /

Hands-free Call
Long Press| Enter FM Station Setting
| Press| Answer / Pause / Play
Press Twice| Call Back
| Press| End / Reject Call
| Press| Back
Long Press| Clear Bluetooth Connection
| Press| Next
Long Press| Switch to Bluetooth / AUX / Flash drive

Features

  • Push voice button to wake up voice assistant (Smart Device)
  • Hands-free calling with built-in microphone
  • Bluetooth connection to mobile device (A2DP)
  • Comes with USB-A charging port
  • Supports Bluetooth, Aux in and flash drive
  • Display vehicle battery voltage level & FM station
  • Remote Control (supports battery replacement)

★ Please note product features will be upgraded without any notice.

Operation

SETUP

  1. Insert DC plug into 12/24V DC port. Display shows vehicle battery voltage, FM station, Bluetooth indicator status.
    Operation

  2. Stick the remote control in a suitable place with the 3M sticker. (for example: steering wheel)
    Operation
    Note: You need to take out the battery insulator before using the remote control.

  3. Turn on vehicle radio. Select unused FM station (FM 88.1 to 107.9).
    (Note: lf sound quality is poor try another unused FM station.)

Press

  • “ ” to enter FM station setting
  • “ ” / “ ” “-/+” by 0.1MHz

Press

SELECT SOURCE (BLUETOOTH, AUX INPUT, FLASH DRIVE)

Pair Device

First-time setup:

  • Power On
  • Bluetooth indicator flashes in “Pairing Mode”
  • Connected to “VM-216” on smartphone
  • Voice confirmation of successful connection
    Pair Device 

Controls

“ ” / “ ” Go back/ Skip song
“ ” Pause / Play
“ ” =Change source (Long press to switch AUX input/Flash drive)

MP3/WMA/WAV/FLAC/APE Supported

Note: It will automatically enter AUX or Flash drive mode when connecting, and automatically return to Bluetooth mode after it is removed.
Important: Use source device for AUX input track controls.

VOICE ASSISTANT

Press “ ” to wake up Voice Assistant.

Note: Voice Assistant disabled during calls.

HANDS-FREE CALLS

“ ” to answer call
“ ” to end or reject call
“ ” 2x to redial last number

  • Incoming Call

  • Talking

  • End the Call

  • Example
    Hands-free Calls

Note: May also use the Bluetooth connected device to disconnect the call.

Specifications

USB-A Output : 5V-2.4A Max
Bluetooth Version : V5.3
Audio Frequency : 20Hz~20kHz
Working Current : 80mA(Max)
Stand-by Current : 60mA(Max)
Bluetooth Working Frequency : 2.402~2.480Ghz
Bluetooth Effective Distance : 32ft
FM Emission Effective Distance : 6ft
Sensitivity: -89dBm
RF Output : 4dBm
FM Frequency : 88.1MHz-107.9MHz
Transmitting Power : 87dBuV/107dBuV

RF Exposure Information (2AY9HVRR010022)

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

RF Exposure Information (2AY9HVR2160021)

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Art sun Enterprise Company Limited is under license. Other trademarks and trade names are those of their respective owners.

Safety Precautions

WARNING

WARNING: Cancer and Reproductive Harm –www.P65Warnings.ca.gov

Troubleshooting

Issue Problem Prevention/Solution
Poor sound quality The selected FM station is the same as a broadcast FM
station Change to another FM station
No audio transmitted Incorrect FM station selected Adjust the device FM

station to match the vehicle FM station
The car stereo is very noisy in radio mode| High volume level selected on the car stereo| Turn up the volume of Bluetooth connected device and turn down the volume of the car stereo to reduce noise

WARNING


  • INGESTION HAZARD :
    This product contains a button cell or coin battery.

  • DEATH or serious injury can occur if ingested.

  • A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.

  • KEEP new and used batteries OUT OF REACH of CHILDREN

  • Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

|

a ) Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
b ) Even used batteries may cause severe injury or death.
c ) Call a local poison control center for treatment information.
d ) Battery type: CR2032
e ) Nominal battery voltage: 3V
f ) Non-rechargeable batteries are not to be recharged.
g ) Do not force discharge, recharge, disassemble, heat above 70℃ or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.
h ) Ensure the batteries are installed correctly according to polarity (+ and -).
i ) Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries.
j ) Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
k ) Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.

CUSTOMER SUPPORT

Walmart, Inc., Bentonville, AR72716
https://www.walmart.com
CUSTOMER SERVICE : support@meiditech.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals